Barkbusters hardware kit two-point mounting aluminum
Hardware kits are tailor-made and fit perfectly on many Street, Adventure, Dual Sport, Trail and Rally bikes. The full wrap-around aluminum hardware is compatible with JET, VPS, STORM or CARBON fenders. All recommended mounting options are for motorcycles with OEM specifications. Two Point Mount products are designed for impact protection.
Basic tank ring incl. tank bag closure unit for BMW F 900 GS Adventure (24-)
This functional tank ring enables the attachment of a tank bag from Hepco&Becker. The scope of delivery includes a BASIC tank ring and the counterholder, which can be individually screwed to the tank bag depending on the tank shape and handlebar angle. The tank cap can still be opened without any problems when the tank ring is fitted. Features: absolutely secure hold, even at high speeds Simple operation thanks to mechanical locking mechanism the Hepco&Becker tank bag is simply put on and locks clearly audible on the tank ring Unlocking: The mechanism is unlocked by a strap at the front of the tank bag in the direction of travel and the tank bag is then simply removed Tank bag systems do not require an ABE or registration in the papers in Germany. Recommended maximum speed with tank bag fitted: 130 km/h Recommended load in the tank bag: approx. 3.0 kg Weight: 0.3 kg Color: black Please note the motorcycle manufacturer's specifications and the model-specific information on the instructions or here with the product Difference between Lock-it and BASIC tank rings: The general function and operation remains the same. However, compared to the Lock-it tank ring, the Basic tank ring only locks mechanically. With the Lock-it tank ring, the magnets help with centering. The difference lies purely in the two magnetic or plastic domes that are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions. Notes: Not suitable for: Street Enduro M A tank bag with Lock-it counterholder cannot be mounted on a BASIC tank ring and vice versa. Tank bag counterholder and tank ring must be from the same system.
Engine protection plate black for BMW F 900 GS Adventure (24-) Hepco & Becker
Even a sidewalk can mean unpleasant and heavy contact with the ground, which can lead to damage to the engine housing. Hepco & Becker engine protection plates protect the manifold and the engine block perfectly against impacts and stone chipping, even with the heaviest ground contact. Naturally manufactured specifically for each model from approx. 4 mm thick, high-strength aluminum, the Hepco & Becker engine protection plate allows enough air through for cooling thanks to its special shape and is naturally angled in such a way that water such as rainwater or splash water is drained to the outside, thus providing additional protection against rust formation. Engine protection plates from Hepco & Becker not only enhance the appearance of your motorcycle, they also emphasize the off-road look. Details: Effective protection for stone chips and crossings Provides additional protection for sensitive parts on the manifold and engine block Technically high-quality workmanship Made from high-strength aluminum MADE IN GERMANY 3-4mm thick Precisely fitting production, adapted to the shape of the motorcycle Incl. mounting kit and easy-to-understand instructions Please observe the installation instructions and model-specific information on whether there may be any restrictions Surface finish: Brushed, anodized Color: Black anodized Weight: 4.2 kg Notes: An underride guard is not subject to registration - you therefore do not need to enter it in the documents and therefore do not need an ABE. Please observe the fitting instructions and model-specific information as to whether there may be any restrictions. Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorcycle! Restrictions may apply to original parts or accessories that have already been installed; these can be found in the fitting instructions.
Engine protection plate silver for BMW F 900 GS Adventure (24-) Hepco & Becker
Even a sidewalk can mean unpleasant and heavy contact with the ground, which can lead to damage to the engine housing. Hepco & Becker engine protection plates protect the manifold and the engine block perfectly against impacts and stone chipping, even with the heaviest ground contact. Naturally manufactured specifically for each model from approx. 4 mm thick, high-strength aluminum, the Hepco & Becker engine protection plate allows enough air through for cooling thanks to its special shape and is naturally angled in such a way that water such as rainwater or splash water is drained to the outside, thus providing additional protection against rust formation. Engine protection plates from Hepco & Becker not only enhance the appearance of your motorcycle, they also emphasize the off-road look. Details: Effective protection for stone chips and crossings Provides additional protection for sensitive parts on the manifold and engine block Technically high-quality workmanship Made from high-strength aluminum MADE IN GERMANY 3-4mm thick Precisely fitting production, adapted to the shape of the motorcycle Incl. mounting kit and easy-to-understand instructions Please observe the installation instructions and model-specific information on whether there may be any restrictions Surface finish: Brushed, anodized Color: Silver anodized Weight: 4.2 kg Notes: An underride guard is not subject to registration - you therefore do not need to enter it in the documents and therefore do not need an ABE. Please observe the fitting instructions and model-specific information as to whether there may be any restrictions. Unless explicitly stated otherwise, our model-specific products are only developed for the standard condition of the motorcycle! Restrictions may apply to original parts or accessories that have already been fitted; these can be found in the fitting instructions.
Grip protection for BMW F 900 GS Adventure (24-) Hepco & Becker
The Hepco & Becker grip guard provides reliable protection for the rider's hands and the motorcycle handlebars both when riding off-road and on asphalt. powder-coated solid construction made of tubular steel Made in Germany Scope of delivery: right + left + instructions + mounting material usually only fits vehicles with original handlebar clamps please follow the installation instructions and the vehicle-specific instructions If a handlebar riser is installed, mounting is also possible in most cases. To do this, longer bolts are required for installation, depending on the handlebar riser. You will need to obtain these screws yourself, as we do not have all screws available in all suitable lengths.
HIGHSIDER pro handlebar adapter For various BMW models (pair)
HIGHSIDER mounting kit for various BMW motorcyclesThis special mounting kit makes it possible to mount the popular HIGHSIDER handlebar end weights, handlebar end mirrors or lever guards on the original handlebars of BMW motorcycles. Using a suitable slotted screwdriver, the M10 threaded sleeves with M6 internal thread are screwed into the existing thread in the handlebars. The HIGHSIDER handlebar accessories can now be fitted to the BMW handlebars using the M6 central screw. If necessary, the washers included in the set can be used to create sufficient clearance between the grip and the attachment. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike to your liking.Dimensions:Outside: M10 x 1.5Inside: M6 x 1Washer:Outer diameter: 18 mmInner diameter: 6.5 mmThickness: 1.6 mmScope of delivery:2 x threaded sleeves2 x washersNOTE: Some BMW motorcycle models MAY not be suitable for HIGHSIDER handlebar end mirrors WITH integrated LED indicators. The handlebar end mirrors with LED indicators can also be fitted to original BMW handlebars with the adapter kit by omitting the expanding sleeve. If the handlebar end mirror cannot be screwed far enough into the handlebars, there will be too much space between the handle and the attachment.
Kriega OS-32 luggage bag
OS-32 ADVENTURE PACK The Kriega Oberlander-S (OS) Adventure luggage system is versatile and offers you a modular miltifunctional luggage system, available from 6 to 100 liters capacity. All OS-PACKS are 100% waterproof and also highly durable and abrasion resistant Hypalon™ and +100D Condura® material. All OS connectors and accessories use aircraft grade aluminum components, so you're guaranteed to be perfectly equipped for the toughest adventures. Serious adventure travel on a motorcycle requires serious adventure gear and the new KRIEGA OVERLANDER SYSTEM (OS) sets a new standard. OS-32 ADVENTURE PACK is specifically designed for riding in the most demanding environments. Can be used as a single stand-alone pack or as a multi-pack luggage system in combination with additional OS connectors. The 100% waterproof roll-top closure (removable white inner lining) guaranteesthat the pack contents remain protected from external factors.Made of the highest quality materials, including highly durable and abrasion resistant Hypalon™ + 1000D Cordura® and aircraft aluminum. A semi-rigid SureGrip rubberized base with integrated hook loops and straps allows the pack to mount directly to the most popular racks or crash bars. Alternatively, the bag can be mounted in a variety of ways with other Kriega loop systems, making the OS-32 a very versatile pack. FEATURES 100% waterproof Inner lining Roll-up -Closure HYPALON ™ + 1000D Cordura® Aircraft aluminum buckles High performance cam curvatures Hi-Vis details Shoulder strap loops MOUNTING OPTIONS The OS-32 requires a case frame in order to mount the OS-32 on the motorcycle. These are model specific, available as accessories from motorcycle manufacturers or other suppliers. Once mounted there are 2 options for the OS-32 Traditional "over the seat" saddlebag style, with OS-STRAPS Attachment to the specially designed OS-PLATFORM to the frame and mounting the OS-32 to the platform. An optional OS-SHOULDER STRAP can be hooked to convert the luggage into a shoulder bag (sold separately). TECHNICAL SPECIFICATIONS DIMENSIONS 400 x 420 x 190 mm CAPACITY 32 liters WEIGHT 2.600 g 10 year warranty In addition to the statutory warranty conditions, Kriega offers a 10-year warranty on all products against defects in materials and workmanship. VIDEO INSTRUCTIONS
Lamp guard grille for BMW F 900 GS Adventure (24-) Hepco & Becker
Our Hepco & Becker lamp guard protects the headlight in many cases and also gives your bike the appropriate off-road look. adapted to the design of the motorcycle effective protection no reflections or danger from glare simple mounting on mostly existing screw points solid construction made from German steel robust and high-quality coating made in Germany without TÜV
LED auxiliary headlight Nova incl. universal mounting for tube Ø18-25mm Hepco & Becker
With the Nova LED auxiliary headlight set from Hepco & Becker, you get everything you need to improve the visibility and safety of your motorcycle. This set includes powerful LED auxiliary headlights, a universal mounting set, a cable set, a switch, instructions and a tool set to conveniently mount and control the headlights. The Nova LED auxiliary headlights not only provide improved illumination of the road, but also give your motorcycle an attractive appearance. Easy installation is made possible by the universal mounting kit and cable set supplied. Increase your safety and add an appealing design to your motorcycle by using the Hepco & Becker LED auxiliary headlight set Nova.The brand new Nova LED auxiliary headlight - the next step in lighting technology. High-power LEDs with two switching levels at 2,500lm - 4,350K / - 5,500K 12 volt, 25 watts per headlight ECE-tested and approved, so no individual approval is required (observe country-specific legal regulations for installation) Improved lighting conditions in road traffic Universal mounting on engine or tank protection bracket with Ø18mm - Ø25mm tube, can be mounted upright or suspended complete headlight set; incl. 2x LED auxiliary headlights, 1x switch, 1x cable set, 2x clamps incl. reduction sleeves, 1x instructions, 1x tool set Connection only via the battery, no connection to vehicle wiring harness required No third-party operation thanks to special control unit with automatic voltage control Waterproof and dustproof to IP67 Headlights can be added flexibly via the switch on the handlebars Additional information: Regulations according to §50 StVZO: Auxiliary lights may be mounted a maximum of 250 mm from the center of the vehicle and at the height of the main headlight. Under these conditions, mounting on the crash bar is also permitted, which provides more effective illumination. Our headlights can be operated as fog lights or as additional high beams. Please note here: While there is no restriction on the number of permissible fog lights, only one additional high beam may be operated on the motorcycle, which must be coupled to the high beam of the main headlight. Operation as a fog light can be switched with the main beam or dipped beam. For these reasons, we offer sets with 2 headlights as fog lights, which are operated with their own switch. The headlights must have the E-mark in order to be operated. Our LED auxiliary headlights have a corresponding test mark and are therefore registration-free. Detailed installation instructions with wiring diagram are included with the headlights. Everything is pre-assembled, without soldering. It is not necessary to cut any cables. The on/off switch is attached to the fittings. The headlights must be adjusted during a test drive in the dark so that other road users are not dazzled. We recommend visiting a specialist workshop for this. Note: The lights can only be switched on approx. 5-15 seconds after starting the engine. A voltage of at least 13.1 V must be applied to the control unit of the wiring harness to enable the circuit. In older vehicles, this can be achieved by briefly increasing the engine speed. Switching off must be done manually at the switch. The NOVA LEDs remain lit until the voltage limit of 11.8 V is reached, even after the engine has been switched off. Only when the voltage falls below this limit do the lights switch off automatically via the control unit. When the motor is switched on again (wait for the control unit dwell time), the voltage limit of 13.1 V is queried again.
SHAD 4P System Montagesatz (seitlich) - BMW F750GS/F850GS/ADVENTURE
4P SYSTEM BMW F750GS / F800GS / F850GS / Adventure / F900GS Adventure Befestigungen zur Montage von Seitenkoffern am Motorrad. ACHTUNG: Nicht kompatibel mit SH23. Gedacht und entwickelt zu 100% in Barcelona für die Befestigung von TERRA Seitenkoffern, ist es auch mit SH35 und SH36 Seitenkoffern kompatibel. Er besteht aus einer Stahlstruktur mit einer hochdichten Metallic-Lackierung. Dank seines Durchmessers von 20 mm, dem dicksten auf dem Markt, bietet er maximale Festigkeit und Widerstandsfähigkeit für das Kofferset, das außerdem mit einer Querstange für die extremsten Einsätze verstärkt ist.
SHAD Tank Click System
Das Click System von SHAD ist die Weiterentwicklung der Befestigungssysteme für Tankrucksäcke. Neben der einfachen Handhabung und der Integration in das Motorrad zeichnet es sich durch den Push Button aus, mit dem sich der Tankrucksack durch einfaches Drücken schnell entriegeln lässt.
Side stand plate for BMW F 900 GS Adventure (24-) Hepco & Becker
Especially when fully loaded or on unpaved surfaces, the motorcycle can easily sink on the side stand.We now offer a precisely milled widening plate that can be quickly bolted to the side stand and eliminates this danger!The Hepco & Becker side stand support extension! more than twice as much contact surface in some cases secure stand of the machine on all surfaces Oxidation-proof anodized aluminium and black-coated upper steel counter-holder simple installation with just a few screws requires no ABE or registration
SW-Motech Crash pad kit for front axle BMW F 750 GS, F 850 GS /Adv, F 900 R /XR - SW Motech
The crash pads for the front axle made of abrasion-resistant plastic protect the fork from damage in the event of a fall. With a glass fiber content of 30%, the core of the crash pads is resistant to impact. The smooth surface also provides excellent sliding properties. The polished, red bull logo provides a visual highlight on your bike. Protection of the fork Discreet abrasion pad made of abrasion-resistant polyamide Robust core made of glass fiber reinforced plastic (PA6 GF30) High mechanical damping capacity due to TPE coating Good sliding and emergency running properties Matt black surface with polished red bull logo Easy mounting with axle thread and model-specific spacer bushings Suitable for the following vehicles BMW F 750 GS (17-20), 4G85 (K80) BMW F 850 GS (17-20), 4G85 (K81) BMW F 850 GS Adventure (18-20), 4G85 (K82) BMW F 750 GS (20-), MG85r (K80) BMW F 850 GS Adventure (20-), MG85r (K82) BMW F 850 GS Adventure (20-), MG85 (K82) BMW F 850 GS (20-), MG85r (K81) BMW F 850 GS (20-), MG85 (K81) BMW F 900 XR (19-), 4R90r (K84) BMW F 900 XR (19-), 4R90 (K84) BMW F 900 R (19-), 4R90r (K83) Details Material: PA6 Ertalon Color: black Total weight: approx. 0,3 kg Scope of delivery 2 x crash pad kit for front axle Mounting instructions Mounting material
SW-Motech Crash pad kit for rear axle BMW S 1000 R, F 750 GS, F 850 GS /Adv, F 900 R /XR - SW Motech
The crash pads for the rear axle made of abrasion-resistant plastic protect the swingarm from damage in the event of a fall. With a glass fiber content of 30%, the core of the crash pads is resistant to impact. The smooth surface also provides excellent sliding properties. The polished, red bull logo provides a visual highlight on your motorcycle. Protection of the swing arm Discreet abrasion pad made of abrasion-resistant polyamide Robust core made of glass fiber reinforced plastic (PA6 GF30) High mechanical damping capacity due to TPE coating Good sliding and emergency running properties Matt black surface with polished red bull logo Easy mounting with axle thread and model-specific spacer bushings Suitable for the following vehicles BMW F 850 GS (17-20), 4G85 (K81) BMW F 750 GS (17-20), 4G85 (K80) BMW F 850 GS Adventure (18-20), 4G85 (K82) BMW F 850 GS (20-), MG85 (K81) BMW F 750 GS (20-), MG85 (K80) BMW F 750 GS (20-), MG85r (K80) BMW F 850 GS Adventure (20-), MG85r (K82) BMW F 850 GS Adventure (20-), MG85 (K82) BMW F 850 GS (20-), MG85r (K81) BMW F 900 R (19-), 4R90 (K83) BMW F 900 R (19-), 4R90r (K83) BMW F 900 XR (19-), 4R90r (K84) BMW F 900 XR (19-), 4R90 (K84) BMW S 1000 R (13-16), K10 (K47) BMW S 1000 RR (15-16), K10 (K46) BMW S 1000 RR (16-18), 2R10 (K46) BMW S 1000 R (16-20), 2R10r (K47) BMW S 1000 R (16-20), 2R10 (K47) BMW S 1000 RR (19-), 2R99r (K67) BMW S 1000 RR (19-), 2R99 (K67) BMW S 1000 R (21-), 2R99r (K63) BMW S 1000 R (21-), 2R99 (K63) Details Material: PA6 Ertalon Color: black Total weight: approx. 0,5 kg Scope of delivery 2 x crash pad kit for rear axle Mounting instructions Mounting material
SW-Motech Mirror extension black, max. installation 40 mm, for BMW F 900 GS Adventure (24-) - SW Motech
So that not only your own shoulders are visible in the rear-view mirror: The extension elements ensure a significantly improved field of vision by moving the mirrors outwards. Once adjusted and screwed in place, the robust and attractive extensions hold the mirrors securely in place, even at high speeds and off-road. An ABE is available for many motorcycle models. Up to 4 cm height gain, up to 4 cm lateral offset To improve visibility to the rear Simple installation on the mirror thread
SW-Motech PRO Cargobag rear bag BMW F 900 GS Adventure (24-)
With a volume of 50 liters, the Cargobag is one of the most versatile bags in the PRO rear bag series. The soft bag adapts very well to a wide variety of rear shapes and offers numerous storage space solutions for transportation on the motorcycle.Large outer pockets on both sides, which can be compressed with Velcro straps if required, make the Cargobag even more adaptable. A large mesh pocket in the lid offers space for small items and tensioning areas with straps on the outside provide support for other items of luggage.The PRO series rear bag is made from indestructible 1680 D ballistic nylon, which was originally designed for military purposes. It also impresses with its high-quality workmanship and well thought-out features: reflective attachments ensure better visibility and a MOLLE attachment on the top allows additional bags to be attached. Universal fit for almost all motorcycles Reliable 4-point tensioning strap fastening 2 outer pockets with zippers 2 side tensioning surfaces for additional luggage Storage space for a helmet Zippered mesh pocket in the lid Covered zippers Underside made of non-slip material Made of robust and particularly UV-resistant 1680D ballistic nylon with water-repellent inner coating Reflective details for better visibility Zipper management: rubber loops prevent the zipper from flapping MOLLE attachment made of sturdy Hypalon material on the top for attaching additional pouches Weather protection thanks to included waterproof inner pocket Robust carrying handle Scope of delivery 1 x PRO Cargobag rear bag 1 x waterproof inner bag 4 x loop straps 2 x lashing eyes for attachment to the license plate holder 1 x paint protection film Fitting instructions Details Material: 1680D ballistic nylon Color: black / anthracite Dimensions: 50.0 x 70.0 x 33.0 cm Total weight: 1.7 kg Total volume: 50.0 l
SW-Motech PRO City tank bag BMW F 900 GS Adventure (24-)
The PRO City was developed for adventure bikes and other motorcycles with a steep tank shape. Although the tank bag offers up to 14 liters of storage space, the slim shape allows optimum steering angle even when fully loaded. Two outer pockets provide additional storage space. The PRO tank bags offer an elegant and timeless design combined with durable materials and sophisticated product features: Ballistic nylon protects the luggage from impacts, wind and weather. The top made of laminated EVA material gives the bags a striking shape and, in conjunction with a MOLLE attachment, ensures a secure hold for smartphone and tablet holders.The factory-fitted guide rail of the top ring makes it much easier to adjust the tank bag to the shape of the tank and the ergonomic needs of the rider. Only the PRO tank bags offer this flexibility. SW-MOTECH also offers the patented PRO tank rings made of fiberglass-reinforced plastic. They are manufactured to match the motorcycle model. (You can find these in the vehicle category and under the article under accessories)The robust PRO tank ring with magnetic guide aid secures the PRO tank bags with a mechanical QUICK-LOCK latch. This allows the tank bags to be attached or removed in a single movement. Volume expansion from 11 to 14 liters via zipper 2 outer pockets The patented PRO tank ring gives PRO tank bags a secure hold Magnetic guide aid in the PRO tank ring for easy attachment Pre-assembled guide rail of the top ring for ergonomic adjustment of the tank bag Top and bottom of the tank bag made of laminated and dimensionally stable EVA plastic Made of robust and particularly UV-resistant 1680D ballistic nylon with water-repellent inner coating MOLLE attachment made of sturdy Hypalon material on the top for smartphone and tablet holder Reflective details for better visibility Mesh compartments on the inside Weather protection with included rain cover Robust carrying handle Cable pass-through on the front and back Can be used with cable lock or anti-theft device Scope of delivery 1 x PRO City tank bag 1 x PRO top ring 1 x PRO City rain cover Fitting instructions Mounting material Details Material: 1680D Ballistic Nylon Color: black / grey Dimensions: 37.0 x 29.5 x 25.0 cm Totalweight: 1.3 kg Total volume: 11.0-14.0 l Please note Make sure that there is sufficient distance between the tank bag and the tank surface (even when loaded) to avoid damage to the paintwork. If the distance is small, the tank surface can be additionally protected with paint protection film or a tank pad. The matching PRO tank ring is required for mounting on the tank. (You can find these in the vehicle category and under the article under accessories) The PRO series tank bags cannot be combined with the EVO tank rings.
SW-Motech PRO Daypack tank bag BMW F 900 GS Adventure (24-)
The universal fit makes the PRO Daypack tank bag - like the PRO Micro - a real all-rounder. However, the larger daypack, which offers 5 to 8 liters of storage space, comes with a few extras. The PRO tank bags offer an elegant and timeless design combined with durable materials and sophisticated product features: Ballistic nylon protects the luggage from impacts, wind and weather. The top made of laminated EVA material gives the bags a distinctive shape and, in conjunction with a MOLLE attachment, ensures a secure hold for smartphone and tablet holders.The factory-fitted guide rail of the top ring makes it much easier to adjust the tank bag to the shape of the tank and the ergonomic needs of the rider. Only the PRO tank bags offer this flexibility. SW-MOTECH also offers the patented PRO tank rings made of fiberglass-reinforced plastic. They are manufactured to match the motorcycle model. (You can find these in the vehicle category and under the article under accessories)The robust PRO tank ring with magnetic guide aid secures the PRO tank bags with a mechanical QUICK-LOCK latch. This allows the tank bags to be attached or removed in a single movement. Volume expansion from 5 to 8 liters via zipper The patented PRO tank ring gives PRO tank bags a secure hold Magnetic guide aid in the PRO tank ring for easy attachment Pre-assembled guide rail of the top ring for ergonomic adjustment of the tank bag Top and bottom of the tank bag made of laminated and dimensionally stable EVA plastic Made of robust and particularly UV-resistant 1680D ballistic nylon with water-repellent inner coating MOLLE attachment made of sturdy Hypalon material on the top for smartphone and tablet holder Reflective details for better visibility Mesh compartments on the inside Weather protection with included rain cover Robust carrying handle Cable pass-through on the front and back Can be used with cable lock or anti-theft device Scope of delivery 1 x PRO daypack tank bag 1 x PRO top ring 1 x PRO Daypack rain cover Fitting instructions Mounting material Details Material: 1680D Ballistic Nylon Color: black / grey Dimensions: 29.5 x 22.5 x 12.5 cm Totalweight: 1.0 kg Total volume: 5.0-8.0 l Please note The matching PRO tank ring is required for mounting on the tank. (You can find these in the vehicle category and under the article under accessories) The PRO series tank bags cannot be combined with the EVO tank rings.
SW-Motech PRO Engage tank bag BMW F 900 GS Adventure (24-)
The PRO Engage is ideal for use on curved tanks. Like all PRO tank bags, the PRO Engage is made from robust and particularly UV-resistant 1680D ballistic nylon with a water-repellent inner coating. The PRO tank bags offer an elegant and timeless design combined with durable materials and sophisticated product features: Ballistic nylon protects the luggage from impacts, wind and weather. The top made of laminated EVA material gives the bags a striking shape and, in conjunction with a MOLLE attachment, ensures a secure hold for smartphone and tablet holders.The factory-fitted guide rail of the top ring makes it much easier to adjust the tank bag to the shape of the tank and the ergonomic needs of the rider. Only the PRO tank bags offer this flexibility. SW-MOTECH also offers the patented PRO tank rings made of fiberglass-reinforced plastic. They are manufactured to match the motorcycle model. (You can find these in the vehicle category and under the article under accessories)The robust PRO tank ring with magnetic guide aid secures the PRO tank bags with a mechanical QUICK-LOCK latch. This allows the tank bags to be attached or removed in a single movement. Volume expansion from 7 to 10 liters via zipper The patented PRO tank ring gives PRO tank bags a secure hold Magnetic guide aid in the PRO tank ring for easy attachment Pre-assembled guide rail of the top ring for ergonomic adjustment of the tank bag Top and bottom of the tank bag made of laminated and dimensionally stable EVA plastic Made of robust and particularly UV-resistant 1680D ballistic nylon with water-repellent inner coating MOLLE attachment made of sturdy Hypalon material on the top for smartphone and tablet holder Reflective details for better visibility Mesh compartments on the inside Weather protection with included rain cover Robust carrying handle Cable pass-through on the front and back Can be used with cable lock or anti-theft device Scope of delivery 1 x PRO Engage tank bag 1 x PRO top ring 1 x PRO Engage rain cover Fitting instructions Mounting material Details Material: 1680D Ballistic Nylon Color: black / grey Dimensions: 35.0 x 26.5 x 20.0 cm Totalweight: 1.1 kg Total volume: 7.0-10.0 l Please note Make sure that there is sufficient distance between the tank bag and the tank surface (even when loaded) to avoid damage to the paintwork. If the distance is small, the tank surface can be additionally protected with paint protection film or a tank pad. The matching PRO tank ring is required for mounting on the tank. (You can find these in the vehicle category and under the article under accessories) The PRO series tank bags cannot be combined with the EVO tank rings.
SW-Motech PRO GS tank bag BMW F 900 GS Adventure (24-)
The PRO GS was developed specifically for steeply sloping tanks such as the BMW R 1250 GS. The sturdy tank bag offers up to 20 liters of generous storage space. Equipped with the MOLLE attachment for holding the smartphone or tablet holder, the PRO GS is the perfect companion for extended rides. The PRO tank bags offer an elegant and timeless design combined with durable materials and sophisticated product features: Ballistic nylon protects the luggage from impacts, wind and weather. The top made of laminated EVA material gives the bags a striking shape and, in conjunction with a MOLLE attachment, ensures a secure hold for smartphone and tablet holders.The factory-fitted guide rail of the top ring makes it much easier to adjust the tank bag to the shape of the tank and the ergonomic needs of the rider. Only the PRO tank bags offer this flexibility. SW-MOTECH also offers the patented PRO tank rings made of fiberglass-reinforced plastic. They are manufactured to match the motorcycle model. (You can find these in the vehicle category and under the article under accessories)The robust PRO tank ring with magnetic guide aid secures the PRO tank bags with a mechanical QUICK-LOCK latch. This allows the tank bags to be attached or removed in a single movement. Volume expansion from 16 to 20 liters via zipper 2 outer pockets The patented PRO tank ring gives PRO tank bags a secure hold Magnetic guide aid in the PRO tank ring for easy attachment Pre-assembled guide rail of the top ring for ergonomic adjustment of the tank bag Top and bottom of the tank bag made of laminated and dimensionally stable EVA plastic Made of robust and particularly UV-resistant 1680D ballistic nylon with water-repellent inner coating MOLLE attachment made of sturdy Hypalon material on the top for smartphone and tablet holder Reflective details for better visibility Mesh compartments on the inside Weather protection with included rain cover Robust carrying handle Cable pass-through on the front and back Can be used with cable lock or anti-theft device Scope of delivery 1 x PRO GS tank bag 1 x PRO top ring 1 x PRO GS rain cover Fitting instructions Mounting material Details Material: 1680D Ballistic Nylon Color: black / grey Dimensions: 42.0 x 34.0 x 30.0 cm Totalweight: 1.5 kg Total volume: 16.0-20.0 l Please note Make sure that there is sufficient distance between the tank bag and the tank surface (even when loaded) to avoid damage to the paintwork. If the distance is small, the tank surface can be additionally protected with paint protection film or a tank pad. The matching PRO tank ring is required for mounting on the tank. (You can find these in the vehicle category and under the article under accessories) The PRO series tank bags cannot be combined with the EVO tank rings.
