alpha Technik steering head bearing set SSH903R
Steering head bearing set SSH903R consisting of high-precision tapered roller bearings and seals Upper bearingInner/outer/height in mm26 x 47 x 15.4 Lower bearingInner/outer/height in mm30 x 55 x 18 The steering head bearing set is made of high-quality parts and is an inexpensive replacement for the original parts. The steering head bearing must be replaced when installing a new fork or if a detent point is detected when the steering is not under load. Such defects often occur gradually over time. A spongy ride is the first sign that it needs to be replaced. Technical description and delivery data:- Steering head bearing set SSH-903R- Contains all bearings required for installation
Alurack top case carrier black for Honda NC 700 X (12-13) /NC 750 X/ DCT (14-20) Hepco & Becker
Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for mounting Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate). Hepco&Becker aluminum racks are specially designed for Hepco&Becker top cases. As the successor to the tried and tested tubular luggage racks, the Alurack is seen as a logical further development and is offered for the younger generation of motorcycles. Each Alurack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorcycle. Thanks to the production from high-quality aluminum in combination with a steel base carrier, the Alurack has a high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. Details: Solid construction No additional adapters are required for top case mounting High-quality surface finish Recommended payload: 5 kg payload in the top case (please observe vehicle-specific information, the stored installation instructions and motorcycle manufacturer information) Technically almost identical to the Easyrack top case carrier, except that the bracket for holding the top case is fixed at the top and cannot be folded down The model-specific base carrier is the same for the Easyrack and Alurack A special bracket is required to mount the aluminum standard top case 35 (article number: 700007350 or 700007351) Luggage carriers do not require an ABE or registration Recommended maximum speed: 130 km/h Weight: 4.1 kg Scope of delivery: Model-specific Alurack top case carrier + mounting kit + mounting instructions Notes: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators.
ARROW exhaust X-KONE stainless steel for Honda NC700X model year 2021-
ARROW X-KONE rear silencer with NiChrome sleeve and carbon end cap, with dB-killer insert, with road approval.For Honda NC700X, type RH09, model year 2021-Can only be used in conjunction with an ARROW AR-71463MI intermediate pipe. Originally developed for the "Competition" and "Competition Full Titanium" complete systems for racetrack use, the Arrow X-KONE exhaust systems are now also available for a wide range of naked and sports bikes. The internal components are made of stainless steel. The noise is dampened by absorption (this system significantly reduces the weight of the inner structure). The cover of the exhaust is made of NiChrom (a stainless steel alloy) and has a satin finish. The bracket is welded directly to the silencer and is bolted to the original mounting points. According to the manufacturer, an Arrow X-KONE rear silencer weighs approx. 2.2 kg. However, this figure may vary depending on the model and version!According to the manufacturer, it is not necessary to make any adjustments to the ECU module when fitting X-KONE systems (errors excepted). However, the manufacturer recommends checking the CO² values.
ARROW Racing-Zwischenrohr für diverse Honda Modelle
ARROW Racing-Zwischenrohr für diverse Honda Modelle ARROW Zwischenrohr, aus Edelstahl. Für Honda Modelle gemäß der Verwendungsliste, u.a. für Honda NC700D Integra 2012-12 NC750D Integra 2014- NC700S 2012-14 NC750S 2014- NC750X 2012-13 NC750X 2014- Zum Anbau an Original-Krümmer und ARROW-Krümmer AR-71464MI. Ohne Katalysator Produktkennzeichnung: Abgastechnik ARROW Hinweis: für Anbau an Original-Krümmer in Verbindung mit ARROW Endschalldämpfer AR-71688AO/MO/PO oder AR-71796 Produkt Typ: ARROW Zwischenrohr NC700X/S, Integra
Barkbusters hardware kit two-point mounting aluminum
Hardware kits are tailor-made and fit perfectly on many Street, Adventure, Dual Sport, Trail and Rally bikes. The full wrap-around aluminum hardware is compatible with JET, VPS, STORM or CARBON fenders. All recommended mounting options are for motorcycles with OEM specifications. Two Point Mount products are designed for impact protection.
Barracuda Windschild Aerosport Plexiglas für Honda NC 700X / NC 750X 2012 - 2014
Barracuda Windschild Aerosport Plexiglas für Honda NC 700X / NC 750X 2012 - 2014 Barracuda Windschild Aerosport, für Honda NC700X / NC750X Modelljahr 2012-2014 Produktkennzeichnung: Barracuda Verkleidungsscheiben Produkt Typ: Windschild Plexiglas Honda NC700X / NC750X
BMC Sportluftfilter für Honda CTX 700 2014-2016; NC 700 2012-; NC 750 2014-; NJ NM4 70 Vultus 2015-2
BMC Sportluftfilter für Honda CTX 700 2014-2016; NC 700 2012-; NC 750 2014-; NJ NM4 70 Vultus 2015-2017 BMC Sportluftfilter für Honda CTX 700 A/D/N/NA/ND (Modelljahr 2014-2016) NC 700 Integra/S/SA/SD/XAC/XC/XDC (Modelljahr 2012-2014) NC 750 Integra/SA/SD/XA/XD (Modelljahr 2014-) Produktkennzeichnung: BMC Luftfilter Produkt Typ: BMC Sportluftfilter für Honda CTX/NC 700/750
C-Bow side carrier black for Honda NC 700 X (12-13) /750 X/DCT (14-20) Hepco & Becker
The C-Bow side bag holder is designed to hold a variety of Hepco&Becker bags. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorcycle and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions. Features: Solid side carrier for mounting Hepco&Becker C-Bow side bags and panniers High-quality surface finish Normal Hepco&Becker hard cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended payload: 5 kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorcycle manufacturer's specifications for any restrictions that may apply) Can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage carriers do not require an ABE or registration in the papers Weight: 2.4 kg Color: black Scope of delivery: Left, right, mounting material and instructions Notes: For models without Honda original bridge. Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Cross-Pro underride guard
ALUMINUM TRAIL UNDERRIDE GUARD "COMPATIBLE WITH CENTER STAND" Made of high quality aluminum, with a thickness of 4mm They wrap around the ground and both sides of the engine and provide your motorcycle with perfect protection against stones Compatible with Center Stand
Easyrack top case carrier black for Honda NC 700 X (12-13) /NC 750 X/ DCT (14-20) Hepco & Becker
Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for mounting Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate). Each Easyrack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorcycle. Thanks to the production from high-quality aluminum in combination with a steel base carrier, the Easyrack has a high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. Details: Solid basic construction made of steel and an aluminum carrier plate No additional adapters are required for top case mounting High-quality surface finish Technically almost identical to the Alurack top case carrier, except that the bracket for top case mounting can be folded in when not in use and the Alurack bracket stands rigidly upwards The model-specific base carrier is the same for the Easyrack and Alurack Luggage carriers do not require an ABE or registration Recommended payload: 5 kg payload (please observe model-specific information, the stored installation instructions and motorcycle manufacturer information) Recommended maximum speed: 130 km/h Weight: 4.2 kg Color: black Scope of delivery: Model-specific Easyrack Topcaseträger + mounting kit + mounting instructions Notes: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators.
Engine guard black for Honda NC 700 X (12-13) /NC 750 X/ DCT (14-20) Hepco & Becker
Whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco&Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps. More than that: in the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage. The Hepco&Becker mudguards perfectly trace the lines of the machine, giving the motorcycle an individual character. Made from an extremely sturdy tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad. Exclusive look thanks to high-quality surface finish: high-quality powder coating from Germany.On top of that, motorcycle protection bars are incredibly well suited to securely lashing your bike to a trailer if you ever need to transport it. Features: Material: Tubular steel made in Germany Surface finish: High-quality powder coating Effectively protects in the event of minor accidents or mishaps Helpful when lashing the motorcycle Comprehensive and easy-to-understand assembly instructions Crash bars are registration-free - so they do not need to be entered in the papers and therefore do not require an ABE Weight: 3.9 kg Color: black Scope of delivery: Right + left incl. mounting material (spacers, sleeves, washers etc.) and Installation instructions Notes: Please observe the model-specific information listed in the installation instructions and the properties! Unless explicitly stated otherwise, Hepco&Becker model-specific products have only been developed for the standard condition of the motorcycle! For safety reasons, all protection bars should be adequately checked after a crash and replaced if necessary. If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
Engine guard black for Honda NC 700 X (12-13) /NC 750 X/ DCT (14-20) Hepco & Becker
Whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco&Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps. More than that: in the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage. The Hepco&Becker mudguards perfectly trace the lines of the machine, giving the motorcycle an individual character. Made from an extremely sturdy tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad. Exclusive look thanks to high-quality surface finish: high-quality powder coating from Germany.On top of that, motorcycle protection bars are incredibly well suited to securely lashing your bike to a trailer if you ever need to transport it. Features: Material: Tubular steel made in Germany Surface finish: High-quality powder coating Effectively protects in the event of minor accidents or mishaps Helpful when lashing the motorcycle Comprehensive and easy-to-understand assembly instructions Crash bars are registration-free - so they do not need to be entered in the papers and therefore do not require an ABE Weight: 3.9 kg Color: black Scope of delivery: Right + left incl. mounting material (spacers, sleeves, washers etc.) and Installation instructions Notes: Please observe the model-specific information listed in the installation instructions and the properties! Unless explicitly stated otherwise, Hepco&Becker model-specific products have only been developed for the standard condition of the motorcycle! For safety reasons, all protection bars should be adequately checked after a crash and replaced if necessary. If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
Factory Links wheel bearing set
Bearing set for front wheel FACTORY LINKS bearings are packed with a heavy-duty premium marine grease and an additive of a special complex thickener that allows it to be virtually waterproof. It provides unsurpassed rust and corrosion protection. Also to keep out any moisture, we've gone from a 30% grease fill to a 60% for harsh conditions. Our FACTORY LINKS ball bearings are specifically designed for off-road use, unlike industrial 2RS ball bearings which offer low torque resistance and therefore low resistance to water ingress.
Front protection bar black for Honda NC 700 X (12-13) /NC 750 X/ DCT (14-20) Hepco & Becker
Details: Good protective effect in the event of accidents and falls at low speeds Turn signals, clutch and brake levers, exhaust silencers, fairing parts etc. are effectively protected High-quality powder coating Incl. mounting material Weight: 1.7 kg
Gilles clutch lever FXL for Honda
Optimal shape for all grip styles Unique due to protected GILLES.TOOLING design Ideal handle length for perfect control Phosphated, precise bearing Road legal through ABE Adjustable up to 35 positions Grip width adjustment accurate to the millimeter Conveniently adjustable by central adjusting wheel Predetermined breaking point in the 2-finger area
Hand protectors for Honda NC 700 X (12-13) / NC 750 X (14-15), slightly tinted, pair
Isotta does not manufacture universal protectors, but develops customized items for each motorcycle model to always offer maximum comfort and protection combined with a sophisticated design. In addition, Isotta also develops and builds unique brackets for each model to create mounting kits that are increasingly robust and discreet. This customization is done to enhance each individual motorcycle and maximize the riding experience. Each product is designed, manufactured and tested entirely in Italy by specialized technicians. The material is the best in the world, guaranteeing 20 years of transparency and impressive robustness. Details: made of 4 mm thick PMMA material (acrylic glass) 100% made in Italy specially made for this motorcycle including mounting material supplied as a set for right and left
Hand protectors for Honda NC 700 X (12-13) / NC 750 X (14-15), transparent, pair
Isotta does not manufacture universal protectors, but develops customized items for each motorcycle model to always offer maximum comfort and protection combined with a sophisticated design. In addition, Isotta also develops and builds unique brackets for each model to create mounting kits that are increasingly robust and discreet. This customization is done to enhance each individual motorcycle and maximize the riding experience. Each product is designed, manufactured and tested entirely in Italy by specialized technicians. The material is the best in the world, guaranteeing 20 years of transparency and impressive robustness. Details: made of 4 mm thick PMMA material (acrylic glass) 100% made in Italy specially made for this motorcycle including mounting material supplied as a set for right and left
High windshield for Honda NC 700 X (12-13) / NC 750 X (14-15), transparent
Details: Thickness: 4 mm Easy installation (includes installation kit) Isotta quality 100% Made in Italy
HIGHSIDER pro Outdoor Cover Black Moto / Scooter - S (1pc)
HIGHSIDER tarpaulinThe perfect outdoor protection for two-wheelers: High-quality tarpaulin made from elastic, tear-resistant, waterproof and UV-resistant high-tech fiber. With rubberized seams, the hard-wearing motorcycle cover offers the best protection against rain, dew or other moisture. The extremely robust cover has a soft inner fleece and is therefore particularly gentle on the paintwork, even with daily use. Designed for road motorcycles, it meets the highest requirements of two-wheeled riders, not least due to the integrated ventilation openings, heat protection on both sides and reinforced lock eyelet for anti-theft protection. It is attached to the motorcycle with an adjustable click fastener. High-contrast, white HIGHSIDER lettering on the long sides of the black tarpaulin and the white HIGHSIDER logo on the back visually emphasize this premium product. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike to your liking. Determine the correct size of your cover by measuring the length, width and height of your motorcycle/scooter and comparing them with the dimensions given. Dimensions:Size S:Length: 183 cmWidth: 80 cm Height: 115 cmFits most 50 cc scooters.Size M:Length: 203 cmWidth: 80 cm Height: 120 cmFits most light motorcycles (80/125 cc and supersports/superbikes).Size L:Length: 229 cmWidth: 89 cm Height: 125 cmFits most naked bikes.Size XL:Length: 246 cmWidth: 94 cm Height: 130 cmFits most choppers and small touring bikes.Size XXL:Length: 264 cmWidth: 105 cm Height: 135 cmSuitable for large cruisers and touring bikes.Scope of delivery: 1 piece incl. practical carrying bag DETERMINE SIZE:Determine the correct size of your tarpaulin by measuring the length, width and height of your motorcycle/scooter or take the dimensions from the vehicle registration document to compare the specified dimensions. The correct size is a tarpaulin that is about 5-10 cm longer than the length of the motorcycle and about 5 cm above the ground. TIP:Don't buy too big, the more it flaps, the more it rubs. And in winter, a tarpaulin always tears and breaks exactly where it can move around. Make sure there is enough space: a gap of at least five centimetres to the ground increases the chance of air exchange and counteracts condensation. If you are in doubt between two sizes, choose the larger option. NOTE:In the case of STRETCH COVERING tarpaulins, it is recommended to choose a size smaller than normal tarpaulins without stretch properties.
