The HIGHSIDER license plate holder AKRON-RS adapts perfectly to the lines of your bike through its design.The model-specific bracket of the AKRON-RS allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting.To avoid damage to cables, all sharp-edged feedthroughs are protected by a rubber membrane grommet.The license plate is made of sheet steel and 2 mm thick. Precise cutting is done by laser. After edging, the plate is given a weather-resistant black powder coating.This ensures an optimal fit and durability.The stepless adjustment allows you to bring the plate without drilling in the desired position. To keep the plate in this position, there is an additional locking screw.The turn signal holders of the AKRON-RS are adjustable in width and thus suitable for any type of accessory turn signals. This adjustability allows you to adjust the position for your turn signals to the most different license plates. To allow the installation of the turn signals without separation from the wiring harness, the 10 mm holes are slotted to the side.You can also adjust the position of the reflector individually via a slider. An adaptation to the different designs of EU license plates is therefore no problem.To screw the license plate securely and reduce vibrations, two rubber washers are included. Another rubber buffer supports the license plate on its underside.Details:- model-specific mount- infinitely adjustable turn signal holder- slotted turn signal mount for easy installation without cable separation- infinitely adjustable reflector, E-approved- suitable for European license plates- infinitely adjustable angle of inclination- additional screw for optimal position security- easy fixation without further work steps (e.g. drilling)- easy mounting of the license plate through slotted holesThe scope of delivery of the AKRON-RS includes- Model-related holder with mounting parts- AKRON-RS license plate holder- Adjustable turn signal brackets- E-tested reflector with adjustable holder- Mounting instructionsNotes:- A special turn signal holder is optionally available for the original turn signals in the accessories tab.- If there are side reflectors mounted on your original license plate holder, they must be reattached in a suitable position or replaced with new ones.Tips:If you have not found a model-specific license plate holder for your vehicle, the universal license plate holders from HIGHSIDER, which are available in many different designs, are certainly a good alternative.
alpha Technik Tieferlegungssatz 35mm für Triumph Trident 660, Typ L101 und L101R, Modelljahr 2021 -
alpha Technik Tieferlegungssatz 35mm für Triumph Trident 660, Typ L101 und L101R, Modelljahr 2021 - alpha Technik Tieferlegungssatz für Triumph Trident 660, Fzg.-Typ: L101, EG-BE-Nr.: e9*168/2013*11675*, und Fzg.-Typ: L101R, EG-BE-Nr.: e9*168/2013*11674*, Modelljahr 2021-. Sitzhöhenreduzierung um ca. 35 mm. Lieferung erfolgt mit allen erfoderlichen Umbauteilen, mit ABE Produktkennzeichnung: Tieferlegungen Hinweis: Achtung: Der Umbau darf nur durch eine Fachwerkstätte erfolgen! Geänderte Fahrzeugteile: - Geänderte Umlenkhebel - Geänderte Position der Gabelrohre in der Gabelbrücke - Seitenständer gekürzt Produkt Typ: Tieferlegungssatz Triumph Trident 660, Typ: L101 Lieferumfang: Alle notwendigen Umbauteile
Alurack Topcaseträger black for Triumph Trident 660 (21-) Hepco & Becker
Topcaseträger consisting of a model-specific mounting kit and the Alurack adapter plate to accommodate Hepco & Becker Topcases or soft luggage (not suitable for topcases with universal plastic plate) Each Alurack Topcaseträger is developed model-specific and thus fits into the harmonious overall appearance of the motorcycle. Thanks to the production of high-quality aluminum in combination with a steel base carrier, the Alurack has a high strength, as well as a very noble appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. solid basic construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Alurack Topcaseträger + mounting kit + installation instructions there are no further adapters for topcase mounting needed high quality surface finish works technically almost the same as the Easyrack topcase carrier, except that the bracket for the topcase is rigidly up and can not be folded the model-specific base carrier is the same for Easyrack and Alurack to mount the Hepco & Becker Alu Standard Topcase 35 you need a special bracket instead of the normal Alurack bracket (item number: 700007350 or 700007351) Luggage carriers do not require ABE or registration Recommended payload: 5kg payload (please note model-specific instructions, the deposited assembly instructions, as well as motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side panniers or tank bag. Recommended maximum speed: 130 km/h Designed for stock condition of the machine. Not tested with accessories such as: exhaust, license plate holder or other indicators.
ARROW Komplettanlage mit VELOCE Endschalldämper schwarz mit Cabonendkappe für Triumph Trident 660, 2
ARROW Komplettanlage mit VELOCE Endschalldämper schwarz mit Cabonendkappe für Triumph Trident 660, 2025- ARROW Komplettanlage mit VELOCE Endtopf mit schwarzer Titanhülle und Carbon-Endkappe, mit dB-Killereinsatz, mit Katalysator, inkl. Zwischenrohr und Krümmer aus Edelstahl und Hitzeschutzschild, mit Straßenzulassung, für Triumph Trident 660, Typ L101, ab Modelljahr 2021-2024 Trident 660, Typ: LG22, Modelljahr 2025- Produktkennzeichnung: Abgastechnik ARROW Produkt Typ: ARROW Full System Triumph
ARROW VELOCE complete system for Triumph Trident 660
ARROW complete system with VELOCE muffler with black titanium cover and carbon end cap, with dB-killer insert, incl. intermediate pipe with catalytic converter and stainless steel manifold, with road approval.For TriumphTrident 660, type L101, from model year 2021- COMPACT AND VERSATILE WITH AMAZING PERFORMANCE Arrow VELOCE is the name of a new, compact and versatile silencer that can unleash all the available power of the motorcycle without compromising on volume and weight. The compact "drop" design fits perfectly on modern bikes and its special shape provides a unique and deep sound. The Arrow VELOCE series is completely new - but it has a unique, distinctly Italian history that has been inspiring motorcyclists from all over the world since 1985.
ARROW VELOCE Racing Komplettanlage für Triumph Trident 660, 2021-
ARROW VELOCE Racing Komplettanlage für Triumph Trident 660, 2021- ARROW Racing Komplettanlage mit VELOCE Endtopf mit schwarzer Titanhülle und Carbon-Endkappe, mit dB-Killereinsatz, inkl. Zwischenrohr und Krümmer aus Edelstahl, ohne Straßenzulassung. Für Triumph Trident 660, Typ L101, ab Modelljahr 2021-2024 Trident 660, Typ: LG22, Modelljahr 2025- Produktkennzeichnung: Abgastechnik ARROW Produkt Typ: ARROW Full System Racing Triumph Trident 660
Barkbusters Storm Hanguads Set Single Point Clamp Mount Handlebar End Ø22mm Black
STORM Hand Guard - Single Point Clamp Mount (22mm) Universal Fit Storm stylish large guard included Fits on a straight 22mm (7/8″) handlebar. Designed for weather protection only. NOT designed for impact protection. Mounts to a single point on the handlebar. Requires 18mm clear straight space on the handlebar on the inside of the handlebar fittings. Provides excellent protection from wind and cold weather. Easy to install. Note: This single point mounting product is not designed for impact protection. (If impact protection is required, choose one of our two-point mounting options).
Barracuda Brems- und Kupplungshebelsatz für Triumph Bonneville Bobber / Thruxton 1200 / Trident 660
Barracuda Brems- und Kupplungshebelsatz für Triumph Bonneville Bobber / Thruxton 1200 / Trident 660 / Street Triple / Street Scrambler u.v.m. Barracuda Brems- und Kupplungshebelsatz, Farbe schwarz, klappbar und verstellbar, mit ABE, für Triumph Modelle siehe Verwendungsliste. Produktkennzeichnung: Barracuda Brems- und Kupplungs Produkt Typ: Brems- und Kupplungshebelsatz
BMC Sport air filter for Triumph Trident 660 (21-)
The BMC standard air filters are made of the best materials and guarantee a much higher air flow than conventional paper filters. In the production of the performance-optimized filters, the extensive know-how from racing is used and each individual meets the highest requirements. For example, the frame of the filters cannot break, the filtering, reusable cotton fabric is impregnated with a special oil and the aluminum mesh is resistant to gasoline vapors and oxidation thanks to treatment with an epoxy solution. Why choose BMC? Better than OEM filters Better than synthetic filters Better than other cotton filters Highest quality Rigorous testing procedures ecological and economical Winner in all categories BMC operates in numerous sectors: automotive, racing, aerospace, marine and industrial, always following the specific regulations and requirements of each of the mentioned industries. Accordingly, BMC tests extremely rigorously and accurately to ensure that its air filters are of the highest possible quality. The technical solutions applied by BMC are derived from the results of continuous and intensive laboratory tests. BMC performs filtration tests according to the international standards for air filters (ISO 5011). According to these tests, BMC air filters have a 98.5 percent filtration efficiency.BMC's filter frame design is manufactured using a unique process called "full molding." This allows the striking red filter to be produced in a single molding process without having to glue the corners, which would cause breakage. On the BMC air filter protrudes the least rubber material of all filters available on the market (less than 6 mm), allowing maximum filter surface.Have a look at our YouVideo:
BMC Sportluftfilter für Triumph Trident 660 2021- , Tiger Sport 660 2022-
BMC Sportluftfilter für Triumph Trident 660 2021- , Tiger Sport 660 2022- BMC Sportluftfilter für Triumph Trident 660, ab Modelljahr 2021- Tiger Sport 660, ab Modelljahr 2022- Produktkennzeichnung: BMC Luftfilter Produkt Typ: BMC Sportluftfilter für Triumph Trident 660 2021-
Bow spoiler for Triumph Trident 660 (21-) Hepco & Becker
This keeps your machine protected from below, even on rocky crossings.Even a sidewalk can mean an unpleasant and violent contact with the ground, which can cause damage to the engine case. Our engine protection plates protect the manifold and engine block from impacts and stone chips, even during the most violent ground contact.Engine protection plates from Hepco & Becker not only visually enhance your motorcycle, they also emphasize the off-road look.effective protection for stone impacts and overrunstechnically high-quality workmanshipmade of high-strength aluminum3-4mm thickprecisely fitting production, adapted to the shape of the motorcycleincl. mounting kit and easy to understand instructionsplease note the mounting instructions as well as model-specific notes whether there may be restrictions
Bow spoiler red / black for Triumph Trident 660 (21-) Hepco & Becker
This keeps your machine protected from below, even on rocky crossings.Even a sidewalk can mean an unpleasant and violent contact with the ground, which can cause damage to the engine case. Our engine protection plates protect the manifold and engine block from impacts and stone chips, even during the most violent ground contact.Engine protection plates from Hepco & Becker not only visually enhance your motorcycle, they also emphasize the off-road look.effective protection for stone impacts and overrunstechnically high-quality workmanshipmade of high-strength aluminum3-4mm thickprecisely fitting production, adapted to the shape of the motorcycleincl. mounting kit and easy to understand instructionsplease note the mounting instructions as well as model-specific notes whether there may be restrictions
C-Bow side carrier black for Triumph Trident 660 (21-) Hepco & Becker
solid side carrier for mounting Hepco & Becker C-Bow side bags and panniers high quality surface finish normal Hepco & Becker hard cases, like the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended load: 5kg per bag/case (please refer to the mounting instructions, vehicle specific instructions, as well as motorcycle manufacturer information for any restrictions that may occur) can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the mounting instructions or the vehicle-specific instructions for the respective carrier) Luggage rack extensions can restrict the mounting of bags on the rack Luggage carriers do not require ABE or registration in the papers Scope of delivery: left+ right + mounting instructions + mounting kit Developed for the standard condition of the machine. Not tested with accessories such as: exhaust, license plate holder or other turn signals. Note that with third-party accessories, the bags always have sufficient distance to the exhaust and the turn signals have a sufficient beam angle. The exhaust beam must not be directed at the bags.
Crash bar for Aprilia Tuareg 660 (21-) SW Motech
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Crash pads for Triumph Trident 660 (21-) - Barracuda
The Barracuda crash pads are specially manufactured for the respective motorcycle models and can be mounted on the motorcycle without additional modification. The scope of delivery includes the right and left crash pad and a vehicle-specific screw set. The plastic pad with anodized aluminum spacers is resistant and durable. Colored inserts are available for visual enhancement (Art.nr. BC-TA-INSERT: silver, black, gold, green, blue and red - please order separately, see "Additional items" tab), with which you can individualize your crash pads and color-match them to your motorcycle.
Easyrack Topcaseträger black for Triumph Trident 660 (21-) Hepco & Becker
Each Easyrack Topcaseträger is developed model-specific and thus fits into the harmonious overall appearance of the motorcycle. Thanks to the production of high-quality aluminum in combination with a steel base carrier, the Easyrack has a high strength, as well as a very noble appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. solid basic construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Easyrack Topcaseträger + mounting kit + installation instructions there are no further adapters for topcase mounting needed high quality surface finish works technically almost the same as the Alurack topcase carrier, except that the bracket for topcase mounting can be folded when not in use and the Alurack bracket is rigid upwards the model-specific base carrier is the same for Easyrack and Alurack Luggage carriers do not require ABE or registration Recommended load: 5kg load (please note the model-specific instructions, the installation instructions and the motorcycle manufacturer's specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side panniers or tank bag. Recommended maximum speed: 130 km/h Designed for stock condition of the machine. Not tested with accessories such as: exhaust, license plate holder or other indicators.
Engine Guard incl. Protectionpad for Triumph Trident 660 (21-) Hepco & Becker
Whether you spend most of your time in difficult terrain, on the country road or in the city, a crash bar from HEPCO & BECKER is always the right choice. Your motorcycle is effectively protected against unexpected mishaps at all times.Engine GuardWhether you spend most of your time on heavy terrain, on country roads or in the city, a crash bar from Hepco&Becker is always the right choice. Your motorcycle is effectively protected at all times against unexpected mishaps.More than that, in the event of a rollover or unintentional contact with the ground, you can protect the motorcycle and the rider from greater damage.The protective bars from Hepco&Becker perfectly trace the lines of the machine, giving the motorcycle an individual character. Made from an extremely sturdy tube-in-tube construction, some with integrated crash pad on new models.Different surface finishes are offered depending on the vehicle model.Protects in the event of accidents and fallsHelpful when lashing the motorcycleHigh quality metal coatingSolid construction, manufactured MADE IN GERMANY in our factory in Pirmasens, GermanyComprehensive and easy to understand assembly instructionsIf there are any restrictions or notes, please refer to the deposited assembly instructions or the vehicle-specific notesNo ABE or registration is requiredScope of delivery: right + left incl. mounting material and instructionsWeight 3 kg
Flat superbike handlebar LSL XN1
X-Bar handlebars 28.6mm in the clamping area / 22.2mm at the endsThe X-Bar handlebars impress with a double bending stiffness compared to standard handlebars.This is the result of the design with a 28.6mm thick diameter in the clamping area and the use of a high-strength aluminum alloy.The handlebar bounces less and offers more reserves under extreme load.Available in a variety of colors.Incl. ABE for many current motorcycles. Please check if your vehicle is registered in the ABE or in the parts certificate and if additional mounting parts (e.g. clamping blocks) are required (see document).For some models a preliminary required manufacturer's confirmation is available. ABE: DOWNLOAD HERESuitable vehicles: ManufacturerModelChassis numberYear of manufacture fromYear until Aprilia Shiver 900 KH000 2017 2017 Aprilia Shiver 900 KH000 2018 2018 Aprilia Shiver 900 2019 2019 Aprilia Tuono 1100 V4 Factory KGA00 2017 2017 Aprilia Tuono 1100 V4 Factory KGA00 2018 2018 Aprilia Tuono 1100 V4 Factory KGA00 2019 2019 Aprilia Tuono 1100 V4 RR KG000 2017 2017 Aprilia Tuono 1100 V4 RR KG000 2018 2018 Aprilia Tuono 1100 V4 RR KG000 2019 2019 BMW F 700 GS ABS 4G80/K70 2017 2017 BMW F 800 GS E8GS/K72 2017 2017 BMW G 310 R 5R31/K03 2016 2016 BMW G 310 R 5R31/K03 2017 2017 BMW G 310 R 5R31/K03 2018 2018 BMW G 310 R 5R31/K03 2019 2019 Ducati Scrambler Desert Sled KE35DS/KB00A 2017 2017 Ducati Scrambler Desert Sled KE35DS/KB00A 2018 2018 Honda CB 1000 R Neo Sports Cafe SC80A 2019 2019 Honda CB 1000 RA Neo Sports Cafe SC80A 2018 2018 Honda CB 300 R Neo Sports Cafe NC55 2018 2018 Honda CB 300 R Neo Sports Cafe 2019 2019 Honda CB 500 FA PC63A 2019 2019 Kawasaki Ninja 650 EX650K 2017 2017 Kawasaki Ninja 650 EX650K 2018 2018 Kawasaki Ninja 650 EX650KKDA 2019 2019 Kawasaki Z 900 RS ZR900CCA 2018 2018 Kawasaki Z 900 RS ZR900CCA 2019 2019 KTM 690 Duke ABS --- 2016 2016 KTM 690 Duke ABS 2017 2017 KTM 690 Duke R ABS --- 2016 2016 KTM 690 Duke R ABS 2017 2017 KTM 690 SMC R ABS LC4 2017 2017 KTM 790 Duke 2018 2018 KTM 790 Duke 2019 2019 Moto Guzzi V7 III Anniversario LDE00 2017 2017 Moto Guzzi V7 III Anniversario LDE00 2018 2018 Moto Guzzi V7 III Carbon LDG00 2019 2019 Moto Guzzi V7 III ie Carbon LDG00 2018 2018 Moto Guzzi V7 III ie Carbon LDG00 2019 2019 Moto Guzzi V7 III Limited 2019 2019 Moto Guzzi V7 III Milano 2019 2019 Moto Guzzi V7 III Milano ABS LDM00 2018 2018 Moto Guzzi V7 III Racer LDB00 2017 2017 Moto Guzzi V7 III Racer LDB00 2018 2018 Moto Guzzi V7 III Racer 2019 2019 Moto Guzzi V7 III Rough LDM00 2018 2018 Moto Guzzi V7 III Rough LDM00 2019 2019 Moto Guzzi V7 III Special LDA00 2017 2017 Moto Guzzi V7 III Special LDA00 2018 2018 Moto Guzzi V7 III Special LDA00 2019 2019 Moto Guzzi V7 III Stone LD000 2017 2018 Suzuki GSX-S 1000 DG1122 2017 2017 Suzuki GSX-S 1000 DG3222 2018 2018 Suzuki GSX-S 1000 DG3222 2019 2019 Suzuki GSX-S 1000 F DG1144 2017 2017 Suzuki GSX-S 1000 F DG3244 2018 2018 Suzuki GSX-S 1000 F DG3244 2019 2019 Triumph 1050 Speed Triple 515NV 2011 2011 Triumph 1050 Speed Triple 515NV 2012 2012 Triumph 1050 Speed Triple ABS 515NV 2013 2013 Triumph 1050 Speed Triple ABS 515NV 2014 2014 Triumph 1050 Speed Triple ABS 515NV 2015 2015 Triumph 1050 Speed Triple R NN01 2016 2016 Triumph 1050 Speed Triple R NN01 2017 2017 Triumph 1050 Speed Triple R ABS 515NV 2012 2012 Triumph 1050 Speed Triple R ABS 515NV 2013 2013 Triumph 1050 Speed Triple R ABS 515NV 2014 2014 Triumph 1050 Speed Triple R ABS 515NV 2015 2015 Triumph 1050 Speed Triple S NN01 2016 2016 Triumph 1050 Speed Triple S NN01 2017 2017 Triumph 675 Street Triple R L67LR 2017 2017 Triumph 765 Street Triple R HD01 2017 2017 Triumph 765 Street Triple R HD01A 2018 2018 Triumph 765 Street Triple R HD01A 2019 2019 Triumph 765 Street Triple RS HD01 2017 2017 Triumph 765 Street Triple RS HD01/A 2018 2018 Triumph 765 Street Triple RS HD01A 2019 2019 Triumph Speed Twin 1200 DP01 2019 2019 Triumph Street Scrambler DC01 2017 2017 Triumph Street Scrambler DC01 2018 2018 Triumph Street Scrambler DC03/R 2019 2019 Triumph Tiger 800 A08 2011 2011 Triumph Tiger 800 A08 2012 2012 Triumph Tiger 800 A08 2013 2013 Triumph Tiger 800 ABS A08 2011 2011 Triumph Tiger 800 ABS A08 2012 2012 Triumph Tiger 800 ABS A08 2013 2013 Triumph Tiger 800 ABS A08 2014 2014 Triumph Tiger 800 XC A08 2011 2011 Triumph Tiger 800 XC A08 2012 2012 Triumph Tiger 800 XC A08 2013 2013 Triumph Tiger 800 XC ABS A08 2011 2011 Triumph Tiger 800 XC ABS A08 2012 2012 Triumph Tiger 800 XC ABS A08 2013 2013 Triumph Tiger 800 XC ABS A08 2014 2014 Yamaha MT 125 RE114 2014 2014 Yamaha MT 125 RE114 2015 2015 Yamaha MT 125 RE114 2016 2016 Yamaha MT 125 A RE292 2017 2017 Yamaha MT 125 A RE292 2019 2019 Yamaha MT 125 A ABS RE115 2014 2014 Yamaha MT 125 A ABS RE115 2015 2015 Yamaha MT 125 A ABS RE115 2016 2016 Yamaha MT 125 A ABS RE292 2018 2018 Yamaha MT-07 RM17 2017 2017 Yamaha MT-09 RN435 2017 2017 Yamaha MT-09 RN435 2018 2018 Yamaha MT-09 2019 2019 Yamaha XSR 900 RN431 2016 2016 Yamaha XSR 900 RN431 2017 2017 Yamaha XSR 900 2018 2018 Yamaha XSR 900 2019 2019
Front guard for Triumph Trident 660 (21-) Hepco & Becker
For selected motorcycle models frequently used in driving schools, from 125cc to 750cc, we offer special front and rear guards that can be combined with our engine guards.good protection in case of overturns and falls at low speedIndicators, clutch and brake levers, mufflers, fairing parts etc. are effectively protectedhigh quality powder coatingincl. mounting material
Givi Top case carrier for Triumph Trident 660 (21-)
Specific topcase support for MONOKEY® or MONOLOCK® casesfor MONOKEY® case use the M5 plate (sold separately)for MONOLOCK® use the M5M or M6M plate (sold separately) or the plate supplied in the case, or the EX2M anodized aluminum luggage carrierYou can find an overview of our cases below in the accessories!For MONOKEY cases max. load 6 kg, for MONOLOCK cases max. load 3 kg.Important notice:GIVI products are designed for vehicles in original condition. Compatibility with accessories from other manufacturers such as exhaust systems, etc. can not be guaranteed
