alpha Technik Gabelwellendichtring Satz 41 x 53 x 8/10,5
alpha Technik Gabelwellendichtring Satz 41 x 53 x 8/10,5 ARI Simmerringsatz, Gabelwellendichtringe 41 x 53 x 8/10,5, mit Doppelfeder Produktkennzeichnung: Fahrwerkstechnik Produkt Typ: Gabelwellendichtring Satz 41 x 53 x 8/10,5
ARROW Auspuff DARK THUNDER für Yamaha WR125X / WR125R 2009-2016, Aluminium schwarz
ARROW Auspuff DARK THUNDER für Yamaha WR125X / WR125R 2009-2016, Aluminium schwarz ARROW DARK THUNDER Endschalldämpfer mit Aluminium-Hülle schwarz eloxiert und Edelstahl-Endkappe, mit herausnehmbarem dB-Killer Einsatz, mit Straßenzulassung. Für Yamaha WR125X, Typ DE07, Modelljahr 2009-16 WR125R, Typ DE07, Modelljahr 2009-16 Montage an Original- oder ARROW-Krümmer AR-52003MI Produktkennzeichnung: Abgastechnik ARROW Hinweis: Montage an Original-Krümmer oder ARROW Krümmer AR-52003MI (ggf. separat bestellen!) Produkt Typ: ARROW Thunder WR125X/WR125R DE07 09- Alu schwarz
ATHENA Top End gasket set (oil seals not included)
Complete gasket set: contains everything needed to assemble the engine, with the exception of the oil seals for the lower part of the engine. 88 pieces
HIGHSIDER pro distance block silver set 25mm
Handlebar spacers for Ø 22.2mm handlebar diameter available in various colors and heights.Simple increase of the seat position, CNC-milled from high-quality aluminum, are installed in the standard handlebar clamp.Delivery includes the required longer screws.ATTENTION IMPORTANT NOTE:Please check before the conversion whether the vehicle intended for the conversion is listed in the ABE attached here!There are different requirements and conditions for each vehicle that allow the conversion of the clamping blocks.The model assignments of the HIGHSIDER pro clamping blocks listed in the ABE are tested for use with the vehicle's standard handlebars.The additional use of a HIGHSIDER pro accessory handlebar is possible, but may require additional modifications to the vehicle (longer cables or cables) due to a different shape of the handlebar.Raising the original handlebar can also lead to additional modifications to the vehicle.Check whether the following requirements apply to your vehicle (-see ABE):- use permitted when using a compensation pad for the fork bridge- use permitted with 20 mm longer brake line- use permitted with 30 mm longer brake lineFailure to comply will invalidate the operating license for the vehicle!
HIGHSIDER pro Street Bar A00 Handlebar Aluminum Black, 7/8 inch
7/8 inch (22.2mm) aluminum handlebars from HIGHSIDER proHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In the 1990s, HIGHSIDER pro worked out the perfect alloy, heat treatment and processing method in its own series of tests. The result is a product that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly tests its handlebars using a specially developed in-house test program, which ensures the high quality of the handlebars.HIGHSIDER pro aluminium handlebars have an outer diameter of 22.2mm and a wall thickness of 4mm (14mm inside). The surface is highly polished and available in up to six anodized colors, depending on the handlebar type. Handlebars in black are also available in matt bead blasted.The handlebars are supplied without drill holes for the anti-rotation lock of the switch fittings.In order to adopt the position of the drill holes from the standard handlebars in the best possible way, we recommend using a HIGHSIDER pro drilling template.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Street Bar A00 Handlebar Black Matt, Aluminum, 7/8 inch
7/8 inch (22.2mm) aluminum handlebars from HIGHSIDER proHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In the 1990s, HIGHSIDER pro worked out the perfect alloy, heat treatment and processing method in its own series of tests. The result is a product that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly tests its handlebars using a specially developed in-house test program, which ensures the high quality of the handlebars.HIGHSIDER pro aluminium handlebars have an outer diameter of 22.2mm and a wall thickness of 4mm (14mm inside). The surface is highly polished and available in up to six anodized colors, depending on the handlebar type. Handlebars in black are also available in matt bead blasted.The handlebars are supplied without drill holes for the anti-rotation lock of the switch fittings.We recommend using a HIGHSIDER pro drilling template to transfer the position of the drill holes from the standard handlebars in the best possible way.All HIGHSIDER pro handlebars are supplied with an ABE.The range of models is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Street Bar L00 Handlebar Black 7/8 inch
HIGHSIDER pro steel handlebars 7/8 inch (22.2mm)HIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own selection of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In its own test series in the 1990s, HIGHSIDER pro researched the load on handlebars during riding and designed its own handlebars to withstand the actual load. The result is a product made of high-strength steel that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly checks its handlebars with its own test program, which ensures the consistent quality of the handlebars.The HIGHSIDER pro steel handlebars have an outer diameter of 22.2mm (7/8 inch) and a wall thickness of 2mm (18mm inside). The surface is high-gloss polished and chrome-plated or black KTL-coated.The handlebars are supplied without holes for the anti-rotation protection of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.All HIGHSIDER pro handlebars are supplied with ABE.The range of models is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Therefore, see the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Superbike A01 handlebar aluminum black, 7/8 inch
7/8 inch (22.2mm) aluminum handlebars from HIGHSIDER proHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In the 1990s, HIGHSIDER pro worked out the perfect alloy, heat treatment and processing method in its own series of tests. The result is a product that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly tests its handlebars using a specially developed in-house test program, which ensures the high quality of the handlebars.HIGHSIDER pro aluminium handlebars have an outer diameter of 22.2 mm and a wall thickness of 4 mm (14 mm inside). The surface is highly polished and available in up to six anodized colors, depending on the handlebar type. Handlebars in black are also available in matt bead blasted.The handlebars are supplied without drill holes for the anti-rotation lock of the switch fittings.In order to adopt the position of the drill holes from the standard handlebars in the best possible way, we recommend using a HIGHSIDER pro drilling template.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Superbike A01 handlebar silver aluminum, 7/8 inch
7/8 inch (22.2mm) aluminum handlebars from HIGHSIDER proHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and material treatment as well as the manufacturing quality of the handlebars, which has been optimized over decades. In the 1990s, HIGHSIDER pro developed the perfect alloy, heat treatment and processing method in its own series of tests. The result is a product that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly tests its handlebars using a specially developed in-house test program, which ensures the high quality of the handlebars.HIGHSIDER pro aluminium handlebars have an outer diameter of 22.2 mm and a wall thickness of 4 mm (14 mm inside). The surface is highly polished and available in up to six anodized colors, depending on the handlebar type. Handlebars in black are also available in matt bead blasted.The handlebars are supplied without drill holes for the anti-rotation lock of the switch fittings.In order to adopt the position of the drill holes from the standard handlebars in the best possible way, we recommend using a HIGHSIDER pro drilling template.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Superbike A01 handlebars black bead blasted, aluminum, 7/8 inch
7/8 inch (22.2mm) aluminum handlebars from HIGHSIDER proHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In the 1990s, HIGHSIDER pro worked out the perfect alloy, heat treatment and processing method in its own series of tests. The result is a product that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly tests its handlebars using a specially developed in-house test program, which ensures the high quality of the handlebars.HIGHSIDER pro aluminium handlebars have an outer diameter of 22.2 mm and a wall thickness of 4 mm (14 mm inside). The surface is highly polished and available in up to six anodized colors, depending on the handlebar type. Handlebars in black are also available in matt bead blasted.The handlebars are supplied without drill holes for the anti-rotation lock of the switch fittings.In order to adopt the position of the drill holes from the standard handlebars in the best possible way, we recommend using a HIGHSIDER pro drilling template.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Superbike AN1 handlebar aluminum black, 7/8 inch
7/8 inch (22.2mm) aluminum handlebars from HIGHSIDER proHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In the 1990s, HIGHSIDER pro worked out the perfect alloy, heat treatment and processing method in its own series of tests. The result is a product that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly tests its handlebars using a specially developed in-house test program, which ensures the high quality of the handlebars.HIGHSIDER pro aluminium handlebars have an outer diameter of 22.2mm and a wall thickness of 4mm (14mm inside). The surface is highly polished and available in up to six anodized colors, depending on the handlebar type. Handlebars in black are also available in matt bead blasted.The handlebars are supplied without drill holes for the anti-rotation lock of the switch fittings.In order to adopt the position of the drill holes from the standard handlebars in the best possible way, we recommend using a HIGHSIDER pro drilling template.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Superbike AN1 handlebar black bead blasted, aluminum, 7/8 inch
7/8 inch (22.2mm) aluminum handlebars from HIGHSIDER proHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and material treatment as well as the manufacturing quality of the handlebars, which has been optimized over decades. In the 1990s, HIGHSIDER pro developed the perfect alloy, heat treatment and processing method in its own series of tests. The result is a product that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly tests its handlebars using a specially developed in-house test program, which ensures the high quality of the handlebars.HIGHSIDER pro aluminium handlebars have an outer diameter of 22.2mm and a wall thickness of 4mm (14mm inside). The surface is highly polished and available in up to six anodized colors, depending on the handlebar type. Handlebars in black are also available in matt bead blasted.The handlebars are supplied without drill holes for the anti-rotation lock of the switch fittings.In order to adopt the position of the drill holes from the standard handlebars in the best possible way, we recommend using a HIGHSIDER pro drilling template.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Superbike AN1 handlebar silver aluminum, 7/8 inch
7/8 inch (22.2mm) aluminum handlebars from HIGHSIDER proHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In the 1990s, HIGHSIDER pro worked out the perfect alloy, heat treatment and processing method in its own series of tests. The result is a product that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly tests its handlebars using a specially developed in-house test program, which ensures the high quality of the handlebars.HIGHSIDER pro aluminium handlebars have an outer diameter of 22.2mm and a wall thickness of 4mm (14mm inside). The surface is highly polished and available in up to six anodized colors, depending on the handlebar type. Handlebars in black are also available in matt bead blasted.The handlebars are supplied without drill holes for the anti-rotation lock of the switch fittings.In order to adopt the position of the drill holes from the standard handlebars in the best possible way, we recommend using a HIGHSIDER pro drilling template.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Superbike L01 handlebar steel black
HIGHSIDER pro steel handlebars 7/8 inch (22.2mm)HIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own selection of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In its own test series in the 1990s, HIGHSIDER pro researched the load on handlebars during riding and designed its own handlebars to withstand the actual load. The result is a product made of high-strength steel that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly tests its handlebars with its own test program, which ensures the consistent quality of the handlebars.The HIGHSIDER pro steel handlebars have an outer diameter of 22.2mm (7/8 inch) and a wall thickness of 2mm (18mm inside). The surface is high-gloss polished and chrome-plated or black KTL-coated.The handlebars are supplied without holes for the anti-rotation protection of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.All HIGHSIDER pro handlebars are supplied with ABE.The range of models is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Therefore, see the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Superbike L01 handlebars steel chrome
HIGHSIDER pro steel handlebars 7/8 inch (22.2mm)HIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own selection of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In its own test series in the 1990s, HIGHSIDER pro researched the load on handlebars during riding and designed its own handlebars to withstand the actual load. The result is a product made of high-strength steel that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly checks its handlebars with its own test program, which ensures the consistent quality of the handlebars.The HIGHSIDER pro steel handlebars have an outer diameter of 22.2mm (7/8 inch) and a wall thickness of 2mm (18mm inside). The surface is high-gloss polished and chrome-plated or black KTL-coated.The handlebars are supplied without holes for the anti-rotation protection of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.All HIGHSIDER pro handlebars are supplied with ABE.The range of models is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Therefore, see the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro X-Bar Cross Bar X00 handlebar aluminum black, 1 1/8 inch
X-Bar aluminium handlebars from HIGHSIDER pro - 28.6mm Ø in the clamping area / 22.2mm Ø in the grip areaHIGHSIDER pro stands for outstanding handlebar quality.This is due to the company's own selection of materials and material treatment as well as the production quality of the handlebars, which has been optimized over decades. The X-Bar handlebars impress with twice the bending stiffness of standard handlebars.The basis for this exceptional stability of the handlebars is the large diameter in the clamping area and the even, conical transition to the grip area.The handlebars bounce less and offer more reserves under extreme loads.The diameter of the handlebars is 28.6 mm in the clamping area and tapers to 22.2 mm towards the grip tube.The wall thickness of the handlebar ends is 4 mm (inner Ø 14 mm). The surface is matt bead-blasted or high-gloss polished and available in up to four anodized colors, depending on the handlebar type.We also offer a version with carbon fibre coating.As is already known in the high-tech bicycle sector, HIGHSIDER pro now also offers a version of the X-Bar handlebar with genuine carbon fibre coating. The aluminum tube is covered with a carbon fiber tube. This sandwich construction achieves a further reduction in weight with the same handlebar stiffness. The production is absolute precision work. This is the only way to comply with the required tolerances of a motorcycle handlebar. Great care must be taken when fitting these handlebars to ensure that the transparent top layer of the carbon fiber material is not damaged.The handlebars are supplied without holes for the anti-rotation protection of the switch fittings.We recommend using a HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never clean in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER smart handlebar weights black OEM style, For various Yamaha (pair)
HIGHSIDER smart handlebar weight Black handlebar weight made of aluminum. Suitable for various Yamaha original handlebars, e.g. XJ6 Div. 2010, FZ 6 S2 ABS 2010, TDM 850 / 900, etc.Dimensions Diameter: 35 mmLength 35 mmThread: M16 x 1.5 mmScope of delivery: 1 pairNote: Please check the dimensions for accuracy of fit before purchasing!
HIGHSIDER smart Type BC 602 Repair Brake Lever Silver With ABE (1pc)
It doesn't always have to be the original. Our HIGHSIDER smart brake levers replace the original 1 to 1. Precisely manufactured from high-quality aluminum, they meet all requirements. Therefore also with ABE. If you are also looking for the right clutch lever, you are sure to find it in our bike finder.
HIGHSIDER smart Type BC 702 Repair Clutch Lever Black With ABE (1pc)
It doesn't always have to be the original. Our HIGHSIDER smart clutch levers replace the original 1 to 1. Precisely manufactured from high-quality aluminum, they meet all requirements. Therefore also with ABE. If you are also looking for the right brake lever, you are sure to find it in our bike finder.
HIGHSIDER smart Type BC 702 Repair Clutch Lever Black With ABE (1pc)
It doesn't always have to be the original. Our HIGHSIDER smart clutch levers replace the original 1 to 1. Precisely manufactured from high-quality aluminum, they meet all requirements. Therefore also with ABE. If you are also looking for the right brake lever, you are sure to find it in our bike finder.
IXIL stainless steel muffler HEXOVAL XTREM for Yamaha WR 125 R / X (Bj.09-16)
Stainless steel muffler. E-approved. Not for vehicles homologated according to Euro 4!All IXIL mufflers have a high-quality finish with stainless steel interior in common. Combined with the available outer shells made of black painted or brushed stainless steel, you get a visually and technically high-quality silencer. Super optics and deep, rich sound fulfill all customer wishes. E-tested, of course. All IXIL mufflers are supplied as bolt-on or slip-on replacement mufflers. Included in delivery are all parts needed for mounting. Different colors selectable. Suitable for the following vehicles ManufacturerModelChassis numberYear of manufacture fromYear of manufacture until Yamaha WR 125 R DE071 2009 2010 Yamaha WR 125 R DE071 2012 2012 Yamaha WR 125 R DE071 2013 2013 Yamaha WR 125 R DE071 2014 2014 Yamaha WR 125 R DE07 2015 2015 Yamaha WR 125 R --- 2016 2016 Yamaha WR 125 X DE07 2009 2009 Yamaha WR 125 X DE07 2010 2010 Yamaha WR 125 X DE07 2011 2011 Yamaha WR 125 X DE07 2012 2012 Yamaha WR 125 X DE07 2013 2013 Yamaha WR 125 X DE07 2014 2014 Yamaha WR 125 X DE07 2015 2015 Yamaha WR 125 X DE072 2016 2016 Tailpipe diameter: 130 x 100 mmTailpipe length: 393 mmWeight: 2.1 kgShape: hexoval Note: Without noise killer the operating permit expires.
LeoVince exhaust system SBK LV One Evo 2, stainless steel, slip on for Yamaha WR 125 R/X (Bj.09-16)
The new LV ONE EVO in STAINLESS STEEL is the synthesis between tradition and modernity. It offers visually the classic look of LeoVince mufflers, but with the highest performance and lightest materials of today. Entirely made of TIG welded AISI 304 stainless steel Flattened oval shape Carbon end cap Carbon retaining clip Manufacturer name lasered directly into the muffler The stainless steel silencers are glass bead blasted, this gives a nice titanium look Excellent price-performance ratio Weight: 2,97 kg Approval: e*-approvedThe exhaust system is approved according to the EC directive 97/24 chap.9 regarding noise. It also complies with EC Directive 97/24 Ch.5, as the original catalytic converter of the vehicle is retained.
LSL Alu-Lenker Superbike A01, 7/8 Zoll, schwarz perlgestrahlt
LSL Alu-Lenker Superbike A01, 7/8 Zoll, schwarz perlgestrahlt LSL Alu-Lenker Superbike A01, 7/8 Zoll, 22,2 mm Durchmesser, Farbe Schwarz Perlgestrahlt Breite 764mm, Höhe 65mm, Tiefe 152mm, Wandstärke 4mm, Klemmbereich 130mm, Griffrohrlänge 210mm Produktkennzeichnung: LSL Lenker Aluminium Produkt Typ: Alu-Lenker Superbike A01, 7/8 Zoll, schwarz perlge
LSL konifizierter Lenker Cross Bar X00 28,6 mm schwarz
LSL konifizierter Lenker Cross Bar X00 28,6 mm schwarz LSL X-Bar Alu-Lenker Cross Bar X00, 1 1/8 Zoll, 28,60mm, Farbe Schwarz, Breite 805mm, Höhe 77mm, Tiefe 90mm, Wandstärke 4,5/4 mm, Klemmbereich 184mm, Griffrohrlänge 208mm Produktkennzeichnung: LSL Lenker Aluminium Produkt Typ: LSL X-Bar Alu-Lenker Cross Bar X00, 1 1/8 Zoll, sc
