Grip heater for Honda CB 750 Hornet (23-) Original
At least 2 years statutory warranty | Show EU notice
Description
Product information
Grip heater for Honda CB 750 Hornet (23-) - extremely slim heated grips with intelligent 360° heat distribution!
These heated grips are not only comfortable, but also extremely practical. They have an integrated control that ensures maximum rider comfort and design integration. The heating level can be adjusted in 5 stages so that you can set the heat exactly to your needs. In addition, an integrated circuit protects the battery from discharging.
The heating level is shown on the TFT display, so you always know exactly how warm it is. And the best thing about it? Our grip heater has been specially developed for the Honda CB 750 Hornet (23-), so it fits perfectly and is easy to install.
Please note that the special adhesive must be ordered separately (see accessories). But once you have everything you need, you're ready for a warm and comfortable ride, no matter how cold it is outside.
To register the heated grips:
1. Connect the SCS jumper plug (070MZ0010300). (The plug must be purchased separately, see accessories)
2. Turn the ignition switch to the "ON" position.
3. Display "SETTING" with the sel switch.
4select "SERVICE" and then press the sel switch →
5. Select "EQUIPMENT" and then press the sel switch →
6. Select "GRIP HEATER" and then press the sel switch →
7. Press the sel switch to activate. ↑↓
8. Press the Sel switch ← , then press and hold the Sel switch → again to return to the top screen.
9. Turn the ignition switch to the "OFF" position and disconnect the SCS jumper plug.
| Accessories category: | Electrics |
|---|
| Honda |
750 CB 750 Hornet 2023-2024 (RH12)
|
|---|
Manufacturer
Honda
|
Honda Motor Co., Ltd. |
Honda R&D Europe (D) GmbH |
Reviews 0
Login
Accessory Items
The heat-resistant special adhesive from Honda is the perfect choice for attaching your grips securely and permanently. The adhesive was specially developed for use on motorcycles and is particularly resistant to high temperatures. Whether you're riding in scorching summer heat or freezing winter temperatures, the adhesive will keep your grips securely in place. Application is very simple: apply the adhesive evenly to the parts to be attached and place them in the desired position. The adhesive hardens within a few minutes, ensuring a quick and reliable connection. The heat-resistant special adhesive is not only extremely robust, but also particularly gentle on your materials. It leaves no residue or damage, ensuring that your handles look perfect.
If you own your Honda motorcycle, the Honda Service Check Short Service Connector is the perfect tool for you. With this electrical connector and built-in jumper cable, you can create an input for the ECM by skipping two wires of the Data Link Connector (DLC). This way you can make sure you skip the right wires and take the best care of your bike. This tool is also necessary to install accessories such as the Honda Quickshifter, Honda Grip Heater, Honda Fog Lights and Honda Electronic Suspension and activate them in the TFT screen menu. Without the Honda Service Check Short Service Connector, installation of these accessories is not possible. The SCS jumper connector original Honda - 070MZ0010300 is a high quality tool manufactured by Honda and perfectly adapted to the needs of your motorcycle. With this tool you can ensure that your motorcycle is always optimally maintained and you can install and activate all accessories.
