Filter by motorcycle model:
HIGHSIDER pro X-Bar Adventure X04 handlebar aluminum black, 1 1/8 inch
X-Bar aluminium handlebars from HIGHSIDER pro - 28.6mm Ø in the clamping area / 22.2mm Ø in the grip areaHIGHSIDER pro stands for outstanding handlebar quality.This is due to the company's own selection of materials and material treatment as well as the production quality of the handlebars, which has been optimized over decades. The X-Bar handlebars impress with twice the bending stiffness of standard handlebars.The basis for this exceptional stability of the handlebars is the large diameter in the clamping area and the even, conical transition to the grip area.The handlebars bounce less and offer more reserves under extreme loads.The diameter of the handlebars is 28.6 mm in the clamping area and tapers to 22.2 mm towards the grip tube.The wall thickness of the handlebar ends is 4 mm (inner Ø 14 mm). The surface is matt bead-blasted or high-gloss polished and available in up to four anodized colors, depending on the handlebar type.We also offer a version with carbon fibre coating.As is already known in the high-tech bicycle sector, HIGHSIDER pro now also offers a version of the X-Bar handlebar with genuine carbon fibre coating. The aluminum tube is covered with a carbon fiber tube. This sandwich construction achieves a further reduction in weight with the same handlebar stiffness. The production is absolute precision work. This is the only way to comply with the required tolerances of a motorcycle handlebar. Great care must be taken when fitting these handlebars to ensure that the transparent top layer of the carbon fiber material is not damaged.The handlebars are supplied without holes for the anti-rotation protection of the switch fittings.We recommend using a HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.Please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never clean in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
Kurzer Kennzeichenhalter inkl. Kennzeichenbeleuchtung für Ducati Scrambler 800 (15-)
Der HIGHSIDER Kennzeichenhalter AKRON-RS passt sich durch sein Design optimal an die Linienführung Deines Bikes an.Die modellbezogene Halterung des AKRON-RS ermöglicht die Montage an den originalen Befestigungspunkte Deines Bikes und somit einen Austausch ohne weiteres bohren oder schneiden.Um Beschädigung von Kabeln zu vermeiden, sind alle scharfkantigen Durchführungen durch eine Gummi-Membrantülle geschützt.Die Kennzeichenplatte ist aus Stahlblech und 2 mm stark. Der präzise Zuschnitt erfolgt per Laser. Nach dem Kanten folgt noch die witterungsbeständige, schwarze Pulverbeschichtung.Damit sind die optimale Passform und Langlebigkeit gesichert.Durch die stufenlose Verstellmöglichkeit kannst Du die Platte ohne bohren in die gewünschte Position bringen. Um die Platte in dieser Position zu halten, gibt es eine zusätzliche Sicherungsschraube.Die Blinkerhalterungen des AKRON-RS sind in der Breite verstellbar und damit für jede Art von Zubehör-Blinkern geeignet. Durch diese Verstellmöglichkeit kannst Du die Position für Deine Blinker den unterschiedlichsten Kennzeichen anpassen. Um die Montage der Blinker ohne Trennung vom Kabelbaum zu ermöglichen, sind die 10 mm Bohrungen zur Seite hin geschlitzt.Auch die Position des Rückstrahlers kannst Du über einen Schieber individuell einstellen. Eine Anpassung an die unterschiedlichen Ausführungen der EU-Kennzeichen ist somit kein Problem.Um das Kennzeichen sicher zu verschrauben und Vibrationen zu reduzieren sind im Lieferumfang zwei Gummischeiben enthalten. Ein weiterer Gummi-Puffer stützt das Kennzeichen an seiner Unterseite.Details:• modellbezogene Halterung• stufenlos verstellbare Blinkerhalter• geschlitzte Blinkeraufnahme für einfache Montage ohne Kabeltrennung• stufenlos verstellbarer Reflektor, E-Geprüft• passend für europäische Nummernschilder• stufenlos verstellbarer Neigungswinkel• zusätzliche Schraube für optimalen Positionssicherheit• einfache Fixierung ohne weitere Arbeitsschritte (z.B. Bohren)• einfache Montage des Kennzeichens durch LanglöcherZum Lieferumfang des AKRON-RS gehören:• Modellbezogene Halterung mit Montageteilen• AKRON-RS Kennzeichenhalteplatte• Verstellbare Blinker-Halterungen• E-Geprüfter Rückstrahler mit einstellbarem Halter• MontageanleitungHinweise:• Für die Originalblinker steht optional im Reiter Zubehör ein spezieller Blinkerhalter zur Verfügung.• Sollten an Deinem Original-Kennzeichenhalter seitliche Reflektoren montiert sein, müssen diese an geeigneter Position wieder angebracht oder durch neue ersetzt werden.Tipps:Solltest du keinen modellspezifischen Kennzeichenhalter für Dein Fahrzeug gefunden haben, sind die Universal-Kennzeichenhalter von HIGHSIDER, die es in vielen verschiedenen Ausführungen gibt, sicher eine gute Alternative.
Lever set for Ducati models - Barracuda
The Barracuda levers impress with their perfect workmanship and delicate design. The levers are made of high-quality billet aluminum. They can be individually adjusted in 6 stages. There is a joint at the base of the lever to prevent damage or breakage even if it falls over. The levers are supplied exclusively in black anodized and in pairs. Alternatively, the lever end pieces can be reordered and exchanged in different anodized colors (see "Accessories"). The brake and clutch levers are supplied and have an ABE.
Mudguard for Ducati Scrambler (14-21) - Barracuda
The rear mudguard for the Ducati Scrambler is made of silver anodized aluminium. It emphasizes the unmistakable classic style of the motorcycle. No changes to the original parts are required and can be fitted without modification. The required mounting material is included in the scope of delivery.
Short license plate holder incl. license plate light for Ducati Scrambler 800 (15-)
The HIGHSIDER license plate holder AKRON-RS fits through its design perfectly to the lines of your bike.The model-specific bracket of the AKRON-RS allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting.To avoid damage to cables, all sharp-edged feedthroughs are protected by a rubber membrane grommet.The license plate is made of sheet steel and 2 mm thick. Precise cutting is done by laser. After edging, the plate is given a weather-resistant black powder coating.This ensures an optimal fit and durability.The stepless adjustment allows you to bring the plate without drilling in the desired position. To keep the plate in this position, there is an additional locking screw.The turn signal holders of the AKRON-RS are adjustable in width and thus suitable for any type of accessory turn signals. This adjustability allows you to adjust the position for your turn signals to the most different license plates. To allow the installation of the turn signals without separation from the wiring harness, the 10 mm holes are slotted to the side.You can also adjust the position of the reflector individually via a slider. An adaptation to the different designs of EU license plates is therefore no problem.To screw the license plate securely and reduce vibrations, two rubber washers are included. Another rubber buffer supports the license plate on its underside.Details:- model-specific mount- infinitely adjustable turn signal holder- slotted turn signal holder for easy mounting without cable separation- infinitely adjustable reflector, E-approved- suitable for European license plates- infinitely adjustable angle of inclination- additional screw for optimal position security- easy fixation without further work steps (e.g. drilling)- easy mounting of the license plate through slotted holesThe scope of delivery of the AKRON-RS includes- Model-related holder with mounting parts- AKRON-RS license plate holder- Adjustable turn signal brackets- E-tested reflector with adjustable holder- Mounting instructionsNotes:- A special turn signal holder is optionally available for the original turn signals in the accessories tab.- If there are side reflectors mounted on your original license plate holder, they must be reattached in a suitable position or replaced with new ones.Tips:If you have not found a model-specific license plate holder for your vehicle, the universal license plate holders from HIGHSIDER, which are available in many different designs, are certainly a good alternative.
Spoiler screen MRA "SM" smoke gray for Ducati Supersport 939 / 950 /S (21-)
The MRA spoiler disc (available in black, gray or clear) is with 34.5cm total length 1 centimeter longer than the MRA original molded disc. The spoiler disc has a spoiler edge at the top end, which directs the airflow upwards. ABE: Yes Grid print: No Length in mm: 345 (=OEM+10mm) Width in mm: 290 Scope of delivery: Spoiler disc "SM
Tank protection bar black for Ducati Desert X Rally (24-) Hepco & Becker
Whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco & Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps. More than that: in the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage. The Hepco & Becker mudguards perfectly trace the lines of the machine, giving the motorcycle an individual character. Made from an extremely sturdy tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad. Exclusive look thanks to high-quality surface finish: high-quality powder coating from Germany.On top of that, motorcycle protection bars are incredibly well suited to securely lashing your bike to a trailer if you ever need to transport it. Features: Material: Tubular steel made in Germany Surface finish: High-quality powder coating Effectively protects in the event of minor accidents or mishaps Helpful when lashing the motorcycle Comprehensive and easy-to-understand assembly instructions Crash bars are registration-free - so they do not need to be entered in the papers and therefore do not require an ABE Weight: 5.8kg Color: black Scope of delivery: Right + left incl. mounting material (spacers, sleeves, washers etc.) and Fitting instructions Notes: Cannot be combined with original engine spoiler/protection plate. Please note the model-specific information listed in the installation instructions and properties! Unless explicitly stated otherwise, Hepco & Becker model-specific products have only been developed for the standard condition of the motorcycle! For safety reasons, all protection bars should be adequately checked after a crash and replaced if necessary. If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
