Handlebar risers, height 30 mm, set back 21 mm, for Honda CB 1000 R (18-) Hepco & Becker – Black
At least 2 years statutory warranty | Show EU notice
Description
Product information
Handlebar risers and offset handlebar risers allow you to adjust your seating position on the motorbike to suit you, making for a more relaxed and comfortable ride. The handlebar risers and offset handlebars blend seamlessly and discreetly into the overall lines of the motorbike.
Features:
- Easy fitting
- TÜV-approved and includes ABE (no registration required)
- High quality
- Various designs depending on the model: spacers or sleeves beneath the handlebar clamps; handlebar risers beneath the handlebars for use with the original upper clamp; handlebar risers with lower and upper clamps
- Handlebar diameter:28.6 mm
- Weight:0.58kg
Recommendation:
- Universal adapter 30 mm (Item No. 4230-MT111-BL) for extending the brake and clutch lines
Model-specificnotes:
- The length of the cables and hoses must be checked individually and extended if necessary
- We recommend reducing the steering angle, as the handlebar riser may lightly touch the plastic around the ignition lock at maximum steering angle
- Not compatible with Hepco & Becker handlebar protectors
- Identical in construction to handlebar riser4240-VF3021-30-21
- TÜV-approved and with ABE (general operating approval)
| Accessories category: | Handlebars & Mirrors |
|---|---|
| Motorcycle Brand: | Honda |
Manufacturer
Hepco & Becker
|
Hepco & Becker GmbH |
Reviews 0
Login
Accessory Items
high viscosity - medium strength - removable - for all metal threaded connections - prevents loosening due to vibration, e.g. on gearboxes, motors, etc. - slightly oil-tolerant - connection can be loosened again with normal tools - DVGW approval - NSF P1 registered (reg. no. 154175) - max. thread: M36 - gap filling capacity: 0.25 mm - breakaway torque: 17-22 Nm - temperature resistance from -55 °C to +150 °C -Further technical information Gap bridging max.: 0.25 mm - color: dark blue - breakaway torque: 17-22 Nm - approval: NSF P1, DVGW
For touching up minor paint damage on powder-coated surfacesContents: 1x brush bottle with the appropriate colour shadePre-treatment: The surface must be clean and free from rust and grease. Sanding of the surface may be necessaryProperties after drying: Once dry, the colour will closely match the original powder coating colour. The gloss level may vary slightly. With metallic colours, more significant variations in the finish should be expected.
This adapter is used to extend hydraulic brake lines or clutch lines by 3 cm.Scope of delivery: 1x adapter, 4x seals, 1x banjo boltColor: blackWeight: 0.04 kg
