HIGHSIDER pro LED daytime running light black With parking light function (1pc)

HIGHSIDER LED daytime running light

The LED daytime running light with 4 power LEDs and parking light function ensures that bikers are clearly visible to other road users. Packaged in a matt black, rectangular aluminum housing, the daytime running light is designed for universal mounting. With this daytime running light, the light switches to dimmed parking light mode when switching to low beam, E-approved.

See and be seen - give your bike personality! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely make you a
eye-catching highlight!

Dimensions:
Width: 150 mm
Height: 38 mm
Depth: 39.5 mm

Technical specifications:
Current consumption at 12.5 volts: max. 0.4 amps (corresponds to approx. 5 watts)
Luminous flux at 12 volts: 250 lumens

Connections:
Black cable: earth (-)
Red cable = plus (+), is connected to switched on plus (ignition).
White cable = is connected to the control cable of the low beam.

Scope of delivery: 1 piece

Note 1 - with existing light switch:
Operation of the HIGHSIDER LED daytime running light requires a manually switched low beam via a light switch.
The daytime running light must be connected in such a way that it goes out when the main headlight is switched on (exception: actuating the headlight flasher). The rear tail light must always remain switched on, i.e. set to ignition plus.
Attention: Any other parking lights on the vehicle must be disconnected, as a maximum of 2 parking lights may be used on the vehicle.

Note 2 - without existing light switch:
The daytime running light can also be used on vehicles without a light switch. The following components are required for this:
Switch: Art. No. 240-044
HIGHSIDER DRL CONTROL- BOX CB1 : Art. No. 208-108 (switches between low beam and daytime running light)