Side stand plate for Honda CB 500 F (13-15) Hepco & Becker
At least 2 years statutory warranty | Show EU notice
Description
Product information
Enlarges the footprint of the side stand and therefore offers optimum stability even on soft ground. Sturdy construction made of aluminum and steel Made in Germany.
Especially when fully loaded or on unpaved surfaces, the motorcycle can easily sink and tip over on the side stand. To free your motorcycle from this danger, we recommend a model-specific, form-milled side stand plate from Hepco & Becker. By enlarging the side stand support to approximately double the surface area compared to the original stand, your motorcycle is perfectly protected against mishaps when parking.
Details:
- Material: Aluminum & powder-coated steel
- Secure stand for the machine on all surfaces
- Effective protection when parking
- Quick and easy installation with just a few screws
- Does not require ABE or registration
- Color: black / silver
- Weight: 0.2 kg
| Accessories category: | Attachment parts |
|---|
| Honda |
500 CB 500 F 2013-2015 (PC45)
500 CB 500 F 2019-2021 (PC63)
|
|---|
Manufacturer
Hepco & Becker
|
Hepco & Becker GmbH |
Reviews 0
Login
Accessory Items
high viscosity - medium strength - removable - for all metal threaded connections - prevents loosening due to vibration, e.g. on gearboxes, motors, etc. - slightly oil-tolerant - connection can be loosened again with normal tools - DVGW approval - NSF P1 registered (reg. no. 154175) - max. thread: M36 - gap filling capacity: 0.25 mm - breakaway torque: 17-22 Nm - temperature resistance from -55 °C to +150 °C -Further technical information Gap bridging max.: 0.25 mm - color: dark blue - breakaway torque: 17-22 Nm - approval: NSF P1, DVGW
For touching up minor paint damage on powder-coated surfacesContents: 1x brush bottle with the appropriate colour shadePre-treatment: The surface must be clean and free from rust and grease. Sanding of the surface may be necessaryProperties after drying: Once dry, the colour will closely match the original powder coating colour. The gloss level may vary slightly. With metallic colours, more significant variations in the finish should be expected.
