PRO Cargobag tail bag Aprilia ETV 1200 Caponord (13-17)
With a volume of 50 liters, the Cargobag is one of the most versatile bags from the PRO tail bag series. The soft bag adapts very well to a wide variety of tail shapes and offers numerous storage solutions for transport on the motorcycle.Large exterior pockets on both sides, which can be compressed with Velcro tabs when needed, make the Cargobag even more adaptable. A large mesh pocket in the lid provides space for small items and bracing areas with straps on the outside provide support for additional luggage.The tail bag from the PRO series is made of indestructible 1680 D Ballistic Nylon, which was originally designed for military purposes. In addition, it convinces with high-quality workmanship and thoughtful features: Reflective attachments provide better visibility and a MOLLE attachment on the top allows the attachment of additional pockets. Universal fit for almost all motorcycles Reliable 4-point tension belt attachment 2 outside pockets with zippers 2 side tensioning areas for additional luggage Storage space for a helmet Zippered mesh compartment in the lid Covered zippers Underside made of anti-slip material Made of robust and especially UV-resistant 1680D Ballistic Nylon with water-repellent inner coating Reflective details for better visibility Zipper management: rubber loops prevent the zipper from flapping MOLLE attachment made of sturdy Hypalon material on the top for attaching additional pouches. Weather protection through included waterproof inner pocket Robust carrying handle Scope of delivery 1 x PRO Cargobag tail bag 1 x waterproof inner bag 4 x loop straps 2 x lashing eyes for attachment to license plate holder 1 x paint protection film Mounting instructions Details Material: 1680D Ballistic Nylon Color: black / anthracite Dimensions: 50,0 x 70,0 x 33,0 cm Total weight: 1 ,7 kg Total volume: 50,0 l
PRO Rearbag tail bag Aprilia ETV 1200 Caponord (13-17)
With its universal fit, the PRO Rearbag is suitable for use on road bikes as well as for the pillion seat of a touring enduro. With a volume of 22 liters, which can be expanded up to 34 liters, the bag offers enough space for luggage on the pillion seat of your motorcycle.You can even stow your helmet in the rear bag. The slightly curved bottom adapts to the seat and is equipped with anti-slip material. The top of the PRO Rearbag rear bag made of dimensionally stable and laminated EVA material gives additional bags a secure hold on the sewn-on MOLLE attachment. The rear bag from the PRO series is made of indestructible 1680 D Ballistic Nylon, which was originally designed for military purposes. In addition, it convinces with high-quality workmanship and sophisticated features: Reflective attachments provide better visibility, robust lashing hooks secure the bags easily and quickly at the rear and a MOLLE attachment on the top allows the attachment of additional pockets.The patented lashing hooks allow flexible attachment of the PRO tail bags. The hooking and tensioning of the straps is done in one step. To remove the bag, the strap is slackened with a flick of the wrist and removed from the lashing eye by pulling on the tie-down strap. The excess strap length can be secured to the strap with Velcro. This allows the bag to be used on different motorcycles and the strap length can be adjusted accordingly. Universal fit for almost all motorcycles Top of the bag made of laminated and dimensionally stable EVA material Zippered mesh compartment in the lid Additional storage space due to two outer pockets with covered zippers Volume expansion in the lid area from 22 to 34 liters Storage space for a helmet Underside made of anti-slip material Robust lashing eyes for secure fastening of the bag at 4 points and for lashing of additional bags Made of durable and extra UV-resistant 1680D Ballistic Nylon with water-repellent inner coating Reflective details for better visibility Zipper management: rubber loops prevent zippers from flapping MOLLE attachment made of sturdy Hypalon material on the top for attaching additional pouches. Easy and quick attachment of the bag to the motorcycle by loop straps with patented lashing hook. Weather protection through included waterproof inner bag Sturdy carrying handle Scope of delivery 1 x PRO Rearbag rear bag 1 x waterproof inner bag 4 x loop straps with lashing hooks 2 x lashing eyes for attachment to license plate holder 1 x paint protection film Mounting instructions Details Material: 1680D Ballistic Nylon Color: black / anthracite Dimensions: 40,0 x 43,0 x 25,0 cm Total weight: 1 ,8 kg Total volume: 22,0-34,0 l
PRO Enduro Strap tank bag APRILIA ETV 1200 Caponord (13-17)
For some motorcycles we can not offer tank rings, but the PRO Enduro strap tank bag impresses with thoughtful details. When stopping to fill the tank, clip fasteners allow the base to be moved or folded away - clearing the way to the tank cap. The PRO Enduro strap tank bag fits like a glove on touring motorcycles with sloping tanks.PRO tank bags offer elegant and timeless design combined with durable materials and well thought-out product features: Ballistic nylon protects luggage from impact, wind and weather. The top made of laminated EVA material gives the bags a distinctive shape and, in conjunction with a MOLLE attachment, ensures a secure hold for smartphone and tablet holders. Suitable for almost any motorcycle tank, even for high-end enduros with extremely short tanks Made of robust and especially UV-resistant 1680D Ballistic Nylon with water-repellent inner coating MOLLE attachment made of sturdy Hypalon material on the top for smartphone and tablet holder Reflective details for better visibility Mesh pockets inside Weather protection with included rain cover Robust carrying handle Cable aperture on the front and back side Scope of delivery 1 x PRO Enduro strap tank bag 1 x waterproof inner bag 1 x paint protection film Details Material: 1680D Ballistic Nylon Color: black / gray Dimensions: 35,0 x 31,5 x 20,0 cm Total weight: 1,1 kg Total volume: 12.0-15.0 l
PRO Trail tank bag APRILIA ETV 1200 Caponord (13-17)
The PRO Trial is the ideal companion for long tours. The tank bag has 18 liters of storage space with open volume expansion and is particularly suitable for use on slightly curved tanks. Two external pockets provide additional storage space. The PRO tank bags offer elegant and timeless design combined with durable materials and well thought-out product features: Ballistic nylon protects luggage from impact, wind and weather. The top made of laminated EVA material gives the bags a distinctive shape and, in conjunction with a MOLLE attachment, ensures a secure hold for smartphone and tablet holders.The guide rail of the top ring, which is already attached at the factory, allows a much simplified adjustment of the tank bag to the shape of the tank and the ergonomic needs of the rider. Only the PRO tank bags offer this flexibility. To match, SW-MOTECH offers the patented PRO tank rings made of fiberglass-reinforced plastic. They are manufactured to match the motorcycle model. (You can find these in the vehicle category and under the article under accessories)The robust PRO tank ring with magnetic guide aid secures the PRO tank bags with a mechanical QUICK-LOCK snap-in lock. This allows the tank bags to be attached or removed with just one movement. Volume expansion by zipper from 13 to 18 liters 2 outside pockets The patented PRO tank ring gives PRO tank bags a secure hold Magnetic guide in PRO tank ring for easy attachment Pre-mounted guide rail of the top ring for ergonomic adjustment of the tank bag Top and bottom of tank bag made of laminated and dimensionally stable EVA plastic Made of robust and especially UV-resistant 1680D Ballistic Nylon with water-repellent inner coating MOLLE attachment made of sturdy Hypalon material on the top for smartphone and tablet holder Reflective details for better visibility Mesh pockets inside Weather protection with included rain cover Robust carrying handle Cable grommet on the front and back side Can be used with cable lock or anti-theft device Scope of delivery 1 x PRO Trial tank bag 1 x PRO top ring 1 x PRO Trial rain cover Mounting instructions Mounting material Details Material: 1680D Ballistic Nylon Color: black / gray Dimensions: 37,0 x 31,0 x 24,0 cm Total weight: 1 ,6 kg Total volume: 13,0-18,0 l Note Make sure that there is sufficient distance between the tank bag and the tank surface (even when loaded) to avoid paint damage. If the distance is small, the tank surface can be additionally protected by paint protection film or a tank pad. For mounting on the tank, the appropriate PRO tank ring is required. (You can find this in the vehicle category and under the article under accessories) The tank bags of the PRO series can not be combined with the EVO tank rings.
PRO Roadpack tail bag Aprilia ETV 1200 Caponord (13-17)
The PRO Roadpack is a compact bag that fits perfectly on the rear of small and sporty motorcycles. Via a zipper, the volume of the small rear bag can be expanded from 8 to 14 liters. An interior zippered pocket in the lid provides storage space for keys, wallet and other small items.In addition to the included loop straps, two Velcro tabs and a slot on the bottom allow for quick and secure attachment to the seat or luggage rack. The stiffened sides, molded lid made of EVA material and straps to tighten the volume expansion guarantee a firm shape even during sporty riding. The tail bag from the PRO series is made of indestructible 1680 D Ballistic Nylon, which was originally designed for military purposes. In addition, it convinces with high-quality workmanship and sophisticated features: Reflective attachments provide better visibility, robust lashing hooks secure the bags easily and quickly at the rear and a MOLLE attachment on the top allows the attachment of additional bags.The patented lashing hooks allow flexible attachment of the PRO tail bags. The hooking and tensioning of the straps is done in one step. To remove the bag, the strap is slackened with a flick of the wrist and removed from the lashing eye by pulling on the tie-down strap. The excess strap length can be secured to the strap with Velcro. Thus, the bag can be used on different motorcycles and the strap length can be adjusted accordingly. Universal fit for almost all motorcycles Top of the bag made of laminated and dimensionally stable EVA material Zippered mesh compartment in the lid Volume expansion in the bottom area from 8 to 14 liters Underside made of anti-slip material Robust lashing eyes for secure fastening of the bag at 4 points and for lashing additional bags Made of durable and especially UV-resistant 1680D Ballistic Nylon with water-repellent inner coating Reflective details for better visibility Zipper management: rubber loops prevent zippers from fluttering MOLLE attachment made of sturdy Hypalon material on the top for attaching additional pouches. Easy and quick attachment of the bag to the motorcycle by loop straps with patented lashing hook. Weather protection through included waterproof inner bag Sturdy carrying handle Scope of delivery 1 x PRO Roadpack tail bag 1 x waterproof inner bag 4 x loop straps with lashing hooks 1 x paint protection film Mounting instructions Details Material: 1680D Ballistic Nylon Color: black / anthracite Dimensions: 36,0 x 28,0 x 15,0 cm Total weight: 0 ,9 kg Total volume: 8 ,0-14,0 l
PRO Daypack tank bag APRILIA ETV 1200 Caponord (13-17)
The universal fit makes the tank bag PRO Daypack - like the PRO Micro - a real all-rounder. However, the larger daypack, which offers 5 to 8 liters of storage space, can come up with some extras. The PRO tank bags offer elegant and timeless design in combination with durable materials and well thought-out product features: Ballistic nylon protects luggage from impact, wind and weather. The top made of laminated EVA material gives the bags a distinctive shape and, in conjunction with a MOLLE attachment, ensures a secure hold for smartphone and tablet holders.The guide rail of the top ring, which is already attached at the factory, allows a much simplified adjustment of the tank bag to the shape of the tank and the ergonomic needs of the rider. Only the PRO tank bags offer this flexibility. To match, SW-MOTECH offers the patented PRO tank rings made of fiberglass-reinforced plastic. They are manufactured to match the motorcycle model (You can find these in the vehicle category and under the article under accessories)The robust PRO tank ring with magnetic guide aid secures the PRO tank bags with a mechanical QUICK-LOCK latch. This allows the tank bags to be attached or removed with just one movement. Volume expansion by zipper from 5 to 8 liters The patented PRO tank ring gives PRO tank bags a secure hold Magnetic guide in PRO tank ring for easy attachment Pre-mounted guide rail of the top ring for ergonomic adjustment of the tank bag Top and bottom of tank bag made of laminated and dimensionally stable EVA plastic Made of robust and especially UV-resistant 1680D Ballistic Nylon with water-repellent inner coating MOLLE attachment made of sturdy Hypalon material on the top for smartphone and tablet holder Reflective details for better visibility Mesh pockets inside Weather protection with included rain cover Robust carrying handle Cable grommet on the front and back side Can be used with cable lock or anti-theft device Scope of delivery 1 x PRO Daypack tank bag 1 x PRO top ring 1 x rain cover PRO Daypack Mounting instructions Mounting material Details Material: 1680D Ballistic Nylon Color: black / gray Dimensions: 29,5 x 22,5 x 12,5 cm Total weight: 1 ,0 kg Total volume: 5 ,0-8,0 l Note For mounting on the tank, the matching PRO tank ring is required. (You can find this in the vehicle category and under the article under accessories) The tank bags of the PRO series can not be combined with the EVO tank rings.
PRO Micro tank bag APRILIA ETV 1200 Caponord (13-17)
Discreet and straightforward: The PRO Micro fits on almost any tank and safely transports small necessities such as vehicle documents and valuables. Like all PRO tank bags, the Micro sits on an EVA plastic base that guarantees high dimensional stability. The volume of the tank bag can be expanded with the help of a zipper. The PRO tank bags offer elegant and timeless design combined with durable materials and well thought-out product features: Ballistic nylon protects the luggage from shocks, wind and weather. The top made of laminated EVA material gives the bags a distinctive shape and, in conjunction with a MOLLE attachment, ensures a secure hold for smartphone and tablet holders.The guide rail of the top ring, which is already attached at the factory, allows a much simplified adjustment of the tank bag to the shape of the tank and the ergonomic needs of the rider. Only the PRO tank bags offer this flexibility. To match, SW-MOTECH offers the patented PRO tank rings made of fiberglass-reinforced plastic. They are manufactured to match the motorcycle model. (You can find these in the vehicle category and under the article under accessories)The robust PRO tank ring with magnetic guide aid secures the PRO tank bags with a mechanical QUICK-LOCK snap-in lock. This allows the tank bags to be attached or removed with just one movement. Volume expansion by zipper from 3 to 5 liters The patented PRO tank ring gives PRO tank bags a secure hold Magnetic guide in PRO tank ring for easy attachment Pre-mounted guide rail of the top ring for ergonomic adjustment of the tank bag Top and bottom of tank bag made of laminated and dimensionally stable EVA plastic Made of robust and especially UV-resistant 1680D Ballistic Nylon with water-repellent inner coating MOLLE attachment made of sturdy Hypalon material on the top for smartphone and tablet holder Reflective details for better visibility Mesh pockets inside Weather protection with included rain cover Robust carrying handle Cable grommet on the front and back side Can be used with cable lock or anti-theft device Scope of delivery 1 x PRO Micro tank bag 1 x PRO top ring 1 x PRO Micro rain cover Mounting instructions Mounting material Details Material: 1680D Ballistic Nylon Color: black / gray Dimensions: 27,0 x 20,5 x 11,0 cm Total weight: 0 ,8 kg Total volume: 3 ,0-5,0 l Note For mounting on the tank, the matching PRO tank ring is required. (You can find this in the vehicle category and under the article under accessories) The tank bags of the PRO series can not be combined with the EVO tank rings.
PRO tank ring APRILIA ETV 1200 Caponord (13-17)
With this model of PRO tank ring, a tank ring adapter replaces the factory-installed tank filler neck. The PRO tank ring is attached to the tank ring adapter The PRO tank ring perfectly combines the innovative strength of two German companies: The QUICK-LOCK latching mechanism of the SW-MOTECH tank rings, which has been tried and tested for years, is now even easier to operate thanks to the magnetic guide aid of the Fidlock technology. The positioning of the top ring has been significantly improved: the sliding top ring is already pre-mounted on the tank bag with a guide rail and the tank bag does not have to be drilled into.This means that the upper ring can be individually aligned on the guide rail on the underside of the tank bag. Once the right position has been found, the top ring is screwed tight. When changing to a different motorcycle, the position of the upper ring can be adjusted accordingly.The magnetic guide aid, developed by Fidlock, complements SW-MOTECH's already sophisticated mechanical QUICK-LOCK snap-on closure: the magnets guide the top ring into the right position on the tank ring and the closure locks firmly into place. Thus, the force of the magnets supports the placement of the tank bag. Attach the tank bag with a flick of the wrist and ride off - the luggage sits securely and it's fun, too.The mechanical latching mechanism secures the tank bag and the magnets bring the two parts of the ring together. The robust fiberglass-reinforced plastic with its high-precision latching geometry is responsible for keeping the tank bag firmly in place in all road conditions.The patented PRO tank ring is matched to the tank filler neck of the motorcycle model. This ensures the best possible positioning on the tank. Model-specific adapter ring for best fit and individual solutions Easy mounting on the tank filler neck Magnetic guide in PRO tank ring for easy attachment Quick release via pull strap allows removal of the PRO tank bag in one easy step The patented PRO tank ring gives PRO tank bags a secure hold Easy refueling, tank cap can be opened as usual Made of glass fiber reinforced polyamide Paint-friendly solution: the tank bag does not rest on the tank Scope of delivery 1 x PRO tank ring 1 x tank ring adapter Mounting instructions Mounting material Details Material: fiberglass reinforced plastic / aluminum Color: black Note The tank rings of the PRO series can not be combined with the EVO tank bags. A tank ring adapter is included in the scope of delivery. This replaces the factory-installed tank filler neck.
C-Bow side carrier black for Aprilia Caponord 1200 (Bj.13-16) Hepco & Becker
Motorcycle model-specific bracket for mounting bags and panniers with C-Bow receptacle. All Hepco & Becker side bags, leather bags or panniers with C-Bow receptacle can be attached to the motorcycle using model-specific C-Bow brackets. The unobtrusive and elegant design blends perfectly into the overall line of the vehicle. A sufficient safety distance of the bags to the hot tailpipe of the exhaust is self-evident. Thanks to the C-Bow technology, the matching bags are quickly and easily attached to the C-Bow carrier with just one click and are theft-protected and firmly locked by key. The bags are firmly attached to the motorcycle and remain in position even when loaded. The turn signals remain mostly in original position. Please note the deposited mounting instructions and model-specific instructions. solid carrier for mounting Hepco & Becker C-Bow side bags and panniers high quality coating precisely fitting, model-specific design adapted to the lines of the motorcycle normal Hepco & Becker hard cases, like the Junior or Journey do not fit! Krauser K-Wing cases do not fit the C-Bow carrier! the carrier is much more discreetly designed than a normal side case carrier and therefore not suitable for large payloads Recommended load: 5kg per bag (please note the mounting instructions, vehicle specific instructions, as well as motorcycle manufacturer specifications) can usually be combined with top case carriers, sissy bars, or solo racks without any problems (please observe the mounting instructions or the vehicle-specific instructions) Luggage rack extensions can restrict the mounting of bags on the rack Luggage carriers do not require ABE or registration in the papers
Easyrack Topcaseträger black for Aprilia Caponord 1200 (Bj.13-16) Hepco & Becker
Motorcycle model-specific holder to accommodate various Hepco & Becker topcases (topcases with universal plate do not fit). Topcase carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for holding Hepco & Becker topcases or soft luggage (not suitable for topcases with universal plastic plate or Orbit topcase). Hepco & Becker Easyracks are specially designed for the Hepco & Becker topcases. As the successor to the proven tubular luggage racks, the Easyrack is seen as a consistent further development and is offered for motorcycles of the younger generation. Each Easyrack top case carrier is developed specifically for the model and thus fits into the harmonious overall appearance of the motorcycle. Thanks to the production of high-quality aluminum in combination with a steel base carrier, the Easyrack has a high strength, as well as a very noble appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. solid construction Scope of delivery: model-specific Easyrack topcase carrier + mounting kit + installation instructions no further adapters for topcase mounting are required high quality surface finish Recommended payload: 5kg payload in the topcase (please note vehicle-specific instructions, the deposited mounting instructions, as well as motorcycle manufacturer specifications) works technically almost the same as the Alurack topcase carrier, except that the topcase holder can be folded down when a topcase is not in use the model-specific base carrier is the same for Easyrack and Alurack Orbit topcase and universal topcases with plastic pallet do not fit Luggage carriers do not require ABE or registration
Alurack Topcaseträger black for Aprilia Caponord 1200 (Bj.13-16) Hepco & Becker
Motorcycle model specific bracket for mounting Hepco & Becker topcases (topcases with universal plate do not fit) Topcaseträger consisting of a model-specific mounting kit and the Alurack adapter plate to accommodate Hepco & Becker topcases or soft luggage (not suitable for topcases with universal plastic plate). Hepco & Becker Aluracks are specially designed for the Hepco & Becker topcases. As the successor to the proven tubular luggage racks, the Alurack is seen as a consistent further development and is offered for motorcycles of the younger generation. Each Alurack top case carrier is developed specifically for the model and thus fits into the harmonious overall appearance of the motorcycle. Thanks to the production of high-quality aluminum in combination with a steel base carrier, the Alurack has a high strength, as well as a very noble appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. solid construction Scope of delivery: model-specific Alurack topcase carrier + mounting kit + installation instructions no further adapters for topcase mounting are required high quality surface finish Recommended payload: 5kg payload in the topcase (please note vehicle-specific instructions, the deposited mounting instructions, as well as motorcycle manufacturer specifications) works technically almost the same as the Easyrack topcase carrier, except that the bracket for topcase mounting is rigidly upwards the model-specific base carrier is the same for Easyrack and Alurack a special bracket is needed for the aluminum standard topcase 35 (item number: HB700007350 or HB700007351) Luggage carriers do not require ABE or registration
Aprilia Caponord clutch lever Racing milled - black
Aprilia Caponord clutch lever Racing milled - black
Tank & engine guard black for Aprilia Caponord 1200 (Bj.13-16) Hepco & Becker
Perfect protection for your machine. Sturdy tubular steel coated with high quality. Whether you are most of the time in heavy terrain, on the country road or in the city, a crash bar from Hepco & Becker is always the right choice. Your motorcycle is effectively protected at all times against unexpected mishaps. More than that, in the event of a rollover or unintentional contact with the ground, you can protect the motorcycle and the rider from greater damage. The protective bars from Hepco & Becker perfectly trace the lines of the Mascine, giving the motorcycle an individual character. Made from an extremely sturdy tube-in-tube construction, some with an integrated crash pad on new models. Different surface finishes are offered depending on the vehicle model. protects in the event of accidents and falls helpful when lashing the motorcycle high quality metal coating comprehensive and easy to understand assembly instructions Scope of delivery: right + left incl. mounting material and instructions if there are any restrictions or notes, please refer to the installation instructions or the vehicle-specific notes no ABE or registration is required
Handle guard right/left for Aprilia Caponord 1200 /Rally (13-16) Hepco & Becker
Protects hands in the event of a fall. Sturdy steel construction that can withstand heavy loads. Easy to fit. The Hepco&Becker grip guard ensures reliable protection of the rider's hands and the motorcycle handlebars both when riding off-road and on asphalt. powder-coated incl. mounting material and instructions right + left usually only fits vehicles with original handlebar clamps please observe the installation instructions and the vehicle-specific information provided
Touring screen MRA "TM" black for APRILIA CAPONORD 1200 (Bj.13-)
The touring windshield is usually longer, and sometimes wider, than the original windshield to better protect the rider from wind and weather. Depending on the windshield angle, the rear end of the windshield on some models is also tilted upwards as a wind deflector across the entire width. This makes riding more relaxed even on longer tours. Item no 4025066143061 ABE Yes Grid print: No Length in mm: 440 Width in mm: 375 Scope of delivery Touring disc "TM
Variotouringscreen MRA "VT" clearAPRILIA CAPONORD 1200 (Bj.13-)
This touring screen has a spoiler at the end that can be manually adjusted to the desired position in seven steps. The rear flow of the spoiler takes the wind pressure from the driver and at the same time reduces turbulence. The Vario- Touringscreen is available in clear and smoke gray. Item no 4025066143085 ABE Yes Raster print: No Length in mm: 470 Width in mm: 375 Scope of delivery Variotouring screen "VT
Variotouringscreen MRA "VT" smoke gray APRILIA CAPONORD 1200 (Bj.13-)
MRA APRILIA CAPONORD 1200 - Variotouringscreen "VT" 2013- This touring screen has a spoiler at the end that can be manually adjusted in seven steps to the desired position. The rear flow of the spoiler takes the wind pressure away from the rider while reducing turbulence. The Vario- Touringscreen is available in clear and smoke gray. Item no 4025066143092 ABE Yes Raster print: No Length in mm: 470 Width in mm: 375 Scope of delivery Variotouring screen "VT
Touring screen MRA "TM" smoke gray for APRILIA CAPONORD 1200 (Bj.13-)
The touring windshield is usually longer, and sometimes wider, than the original windshield to better protect the rider from wind and weather. Depending on the windshield angle, the rear end of the windshield on some models is also tilted upwards as a wind deflector across the entire width. This makes riding more relaxed even on longer tours. Item no 4025066143061 ABE Yes Grid print: No Length in mm: 440 Width in mm: 375 Scope of delivery Touring disc "TM
Touring screen MRA "TM" clear for APRILIA CAPONORD 1200 (Bj.13-)
The touring windshield is usually longer, and sometimes wider, than the original windshield to better protect the rider from wind and weather. Depending on the windshield angle, the rear end of the windshield on some models is also tilted upwards as a wind deflector across the entire width. This makes riding more relaxed even on longer tours. Item no 4025066143061 ABE Yes Grid print: No Length in mm: 440 Width in mm: 375 Scope of delivery Touring disc "TM
Brake disc lock for Aprilia RSV4, Tuono, Caponord
The ROADLOK BRAKE brake disc lock is CNC machined from anodized billet aluminum. Includes Ergal spacer, stainless steel screws with a strength class of 8.8, a stainless steel locking pin and key code keys. This is a, permanently mounted on the vehicle, brake disc lock that completely blocks the rotation of the front wheel. Quick and easy assembly.
Inner bags 33L, black for Aprilia Caponord Rally
Inner bags 33L, black for Aprilia Caponord Rally
Top Case, white, 40 L for Aprilia Caponord
Top Case, white, 40 L for Aprilia Caponord
Aprilia Caponord luggage rack - black
Aprilia Caponord Luggage rack - black aluminumSuitable for: Manufacturer Model Type Engine displacement Chassis Aprilia Caponord 4 T 8 V , LC , 2014-2015 1200 ZD4VK000 Aprilia Caponord 4 T 8 V , LC , 2014-2015 1200 ZD4VK001 Aprilia Caponord 4 T 8 V , LC , 2014-2015 1200 ZD4VKA Aprilia Caponord 4 T 8 V , LC , 2014-2015 1200 ZD4VKA01 Aprilia Caponord Rally 4 T 8 V , LC , 2015 1200 ZD4VKB000 Aprilia Caponord Rally 4 T 8 V , LC , 2015 1200 ZD4VKB001
Original Aprilia footrest set, Racing / without ABE - Caponord Dorsoduro
Racing foot rates drivers 1 pair Rider Racing Footpegs Made of CNC machined aluminum Perfect for riding on the race track For better control and a sportier look Color: black Important note: For track use only.
