Adapter for original Aprilia turn signal left
Adapter for original turn signal left for div. Aprilia models. Powder coated or KTL painted black.
Adapter for original Aprilia turn signal right
Adapter for original turn signal right for div. Aprilia models. Powder coated or KTL painted black.
ADAPTER TYPE 2 FOR TANK BAG QUICK FASTENING
Tank ring to enable the fitting of Oxford QR quick release bags to your motorcycle tank. Made from 304 grade stainless steel deburred and shot basted to give a professional high quality feel. Please see attached fitting list to select your Type - Type 1 to 6 available
Adjustable brake lever aluminum red for Aprilia RS 457 (24-) / Tuono 457 (25-)
The clutch lever is made of billet aluminum and is comfortable for the rider thanks to its adjustment options. The red anodization gives it a racing look. Note: This item is not street legal
Adjustable brake lever for Aprilia RX 125 (25-) / SX 125 (25-)
This adjustable brake lever for the front brake is made of billet aluminum. The red anodized finish gives the bike a sporty look. Thanks to its adjustment options, the rider can find the most comfortable riding position. Note: Not approved for road use.
Adjustable clutch lever aluminum red for Aprilia RS 457 (24-) / Tuono 457 (25-)
Front brake lever made of billet aluminum, which is comfortable for the rider thanks to its adjustability. The red anodization gives it a racing look. Note: This item is not street legal
Adjustable clutch lever for Aprilia RX 125 (25-) / SX 125 (25-)
This adjustable clutch lever is made of billet aluminum. The red anodizing gives the bike a sporty look. Thanks to the adjustment options, the rider can find the most comfortable riding position. Note: Not approved for road use.
Adjustable footrest system for Aprilia RS 660 /Factory / Tuono 660/Factory
Adjustable rider footrests made from CNC-milled aluminum. The footrests are multi-adjustable for an optimum riding position. Suitable for inverted shifting scheme. Note: For race track use only.
Adjustable footrests EVO, stainless steel, for Aprilia Tuareg 660 - SW Motech
The original footrest does not offer a comfortable position? Then the EVO footrest kit from SW-MOTECH is the ideal solution. A sophisticated system consisting of rotatable elements with firmly interlocking teeth allows 36 variation possibilities. The position of the footrest can be adjusted downwards, forwards and backwards as well as in terms of inclination to suit individual requirements. The model-specific joint adapters are simply mounted on the footrest mount using the original parts. We show how this works in the fitting instructions. Simple mounting on the original footrest mount 36-fold adjustable via rotatable, toothed elements downwards, forwards and backwards as well as in inclination Individual adjustment of the height (highest setting corresponds to the original position, lowering up to max. 15 mm possible) Secure hold due to interlocking of elements and screw connection Markings facilitate symmetrical adjustment of both sides Profile with rounded edges protects the boot sole and gives extra grip at the same time Removable, metal-reinforced rubber pad with non-slip surface structure and large contact surface (approx. 8 x 5 cm) for more comfort and grip Made of electropolished, corrosion-resistant cast stainless steel Mounting material included Details Material: stainless steel / rubber Color: silver / black Total weight: approx. 1.4 kg Scope of delivery 2 x EVO footrests 2 x model specific joint adapters Mounting instructions Mounting material
Adjustable footrests EVO, stainless steel, for Aprilia Tuareg 660 - SW Motech
The original footrest does not offer a comfortable position? Then the EVO footrest kit from SW-MOTECH is the ideal solution. A sophisticated system consisting of rotatable elements with firmly interlocking teeth allows 36 variation possibilities. The position of the footrest can be adjusted downwards, forwards and backwards as well as in terms of inclination to suit individual requirements. The model-specific joint adapters are simply mounted on the footrest mount using the original parts. We show how this works in the fitting instructions. Simple mounting on the original footrest mount 36-fold adjustable via rotatable, toothed elements downwards, forwards and backwards as well as in inclination Individual adjustment of the height (highest setting corresponds to the original position, lowering up to max. 15 mm possible) Secure hold due to interlocking of elements and screw connection Markings facilitate symmetrical adjustment of both sides Profile with rounded edges protects the boot sole and gives extra grip at the same time Removable, metal-reinforced rubber pad with non-slip surface structure and large contact surface (approx. 8 x 5 cm) for more comfort and grip Made of electropolished, corrosion-resistant cast stainless steel Mounting material included Details Material: stainless steel / rubber Color: silver / black Total weight: approx. 1.4 kg Scope of delivery 2 x EVO footrests 2 x model specific joint adapters Mounting instructions Mounting material
Air baffle brake carbon Aprilia RSV4 / Tuono 1000/1100
Experience the next level of riding performance with our carbon air scoop for the brake, specially developed for the Aprilia RSV4 and Tuono 1000/1100 Front brake, but also ensures that the braking force remains constant - for a safe and precise riding experience in every situation. Imagine gliding through corners and feeling the confidence in your brakes as the wind blows through your hair. Every detail of this product is designed to give you an unparalleled riding experience and get your adrenaline pumping. With the high-quality carbon fiber material, you not only get a lightweight component for your bike, but also a classy look that attracts everyone's attention. The air deflector is supplied as a set for left and right and is easy to fit - so you can quickly concentrate on the essentials again: riding enjoyment. As an original Aprilia accessory, it stands for the highest quality and precision fit. Rely on the know-how from MotoGP and make your motorcycle fit for every challenge. Don't wait any longer, upgrade your Aprilia now! Get the air scoop and experience the perfect combination of performance and style. Air Scoop for the front brake to increase cooling and keep the braking force even. This Air Scoop is further proof of the direct transfer of MotoGP know-how to production motorcycles. Made of carbon fiber to keep the weight low and create a high-quality look. Pair: left and right Original Aprilia accessories Easy mounting
Air filter element for Aprilia RS 660 (20-) Original
Air filter element for Aprilia RS 660 - Original Aprilia
Air filter element for Aprilia RSV 4 (15-) Original
Original air filter insert for Aprilia RSV 4 from year 15.
Air filter for Aprilia Tuareg 660 /Rally (25-)
High-performance air filter made of pre-impregnated foam with oil to capture a large amount of dust and impurities that occur both on and off the road. It is a filter that is suitable for all operating conditions and protects the engine, especially when driving in groups off-road.
Akrapovic sport exhaust silencer complete system for Aprilia RS 660 (homologated / approved)
The homologated Aprilia silencer complete system "Made by Akrapovič" for an even sportier look with a Loudness of 93 dB at 5250 rpm. Thanks to the use of excellent materials and the design of the system, the RS 660 sounds even richer and sportier. The exhaust system is ECE EU5 homologated The use of this Aprilia original accessory does not affect the vehicle warranty. Silencer Absorption muffler with stainless steel mesh and heat resistant insulating material Carbon fiber muffler shroud and bracket Stainless steel inlet cap and welded inlet bushing Pre-silencer: Absorption muffler with stainless steel mesh and heat-resistant Insulation material 2-in-1 collector made of stainless steel with conical tubes Titanium shroud and bracket Catalytic converter mounted between pre-silencer and manifold pipes; EU5 compliant Manifold system: Aluminum cylinder head flange with stainless steel liners Conical stainless steel manifold pipes Connection for stainless steel lambda probes
alpha Technik brake disk ABD33 rear
alpha Technik brake disc ABD33 (Da=220 mm, Di=105.3 mm, bolt circle=125 mm), perforated steel outer ring, with ABE Developed for the toughest racing conditions, tested for resilience in the IDM and now available for you: the alpha Technik brake disc "aBD³³" - naturally with ABE. The look is more than just design. The openings in the friction ring have been specifically designed. The overlapping of the openings ensures constant cleaning of the contact surface between the brake pad and brake disk. This prevents the accumulation of dirt and optimizes the bleeding of outgassing brake pads. The brake pad lies evenly and evenly on the friction ring during the entire rotation. The contact surface also remains constant. This is made possible by the geometry and alignment of the ventilation openings. The even contact prevents one-sided wear of the brake pad, even under extreme loads. The harmonious loading of the pad prevents premature wear. The result is clear feedback to the rider, the braking process becomes more transparent and predictable and thus promotes confidence in your own braking system. Features:- Full floating disc*- Outer ring made of special steel- Plane-parallel grinding- Inner ring aluminum, CNC-milled- Optimum friction values- Even wear- Long service life- With ABE *Full floating disk depending on the vehicle (note article designation!)
alpha Technik Bremsscheibe ABD33 schwimmend
alpha Technik Bremsscheibe ABD33 schwimmend alpha Technik Bremsscheibe ABD33 schwimmend (Da=320mm, Di=64,2mm, Lochkreis=80mm, mit Versatz), Innenkranz Alu schwarz eloxiert, Außenring Stahl mit Omega-Design, mit ABE Produktkennzeichnung: Bremsentechnik Produkt Typ: alpha Technik Bremsscheibe ABD33 schwimmend
alpha Technik Bremsscheibe Omega-Design ABD33, vorne für Aprilia RSV4, Tuono
alpha Technik Bremsscheibe Omega-Design ABD33, vorne für Aprilia RSV4, Tuono alpha Technik Bremsscheibe ABD33 schwimmend (Da=330mm, Di=64mm, Lochkreis=80mm, mit Versatz), Innenkranz Alu schwarz eloxiert, Außenring Stahl mit Omega-Design, mit ABE Produktkennzeichnung: Bremsentechnik Produkt Typ: alpha Technik Bremsscheibe ABD33 schwimmend
alpha Technik Drosselkit "Power+Eco" 45km/h >auf> 25km/h für Aprilia SR50R
alpha Technik Drosselkit "Power+Eco" 45km/h >auf> 25km/h für Aprilia SR50R 45km/h >auf> 25km/h "Power+Eco" Mofaumrüstsatz mit Gutachten (CDI mit integrierter Zündspule und mittels SpeedContRoller + Gameboy verstellbar) für Aprilia SR50R,Fzg.Typ: VF, Variante: D, (Vergasermodell) ab Modelljahr 2005, EG-BE-Nr.:e11*2002/24*0126* Produktkennzeichnung: Leistungsä. KKR elektrisch Hinweis: Funktionsbeschreibung: siehe PDF, Nur für Fahrzeuge mit Vergaser SR50 R Fz.Typ.:VF Variante D Geänderte Fahrzeugteile: CDI, Variomatikanschlag, Produkt Typ: Drosselkit "Power+Eco" für Aprilia SR50R Lieferumfang: TÜV-Gutachten + alle notwendigen Umbauteile zur Geschwindigkeitsumrüstung auf 25 km/h, (mit vorgedrucktem Typenschildaufkleber)
alpha Technik Drosselkit 11 kW für Aprilia Pegaso 125, ET
alpha Technik Drosselkit 11 kW für Aprilia Pegaso 125, ET "Motorradland" Umrüstsatz für Aprilia Pegaso 125, Fzg.Typ: ET, von 17 kW bei 10250/ min auf 11 kW bei 9000/ min, mit EBE, Bj. 1990-91, mit Teilegutachten Produktkennzeichnung: Leistungsä. Leichtkrafträder Geänderte Fahrzeugteile: MOTORRADLAND: Drosselblende Einlaß + Auslaß Produkt Typ: Drosselkit 11 kW für Aprilia Pegaso 125, ET Lieferumfang: TÜV-Gutachten + alle notwendigen Umbauteile
alpha Technik Drosselkit 11 kW für Aprilia RS125, RM
alpha Technik Drosselkit 11 kW für Aprilia RS125, RM Umrüstsatz mit Gutachten für Aprilia RS125, Fzg.Typ: RM, ab Modelljahr 2008-, EG-BE-Nr.:e11*2002/24*0665*, von 18kW/135km/h auf 11kW/115km/h Produktkennzeichnung: Leistungsä. Leichtkrafträder Geänderte Fahrzeugteile: Black Box einbauen, Hauptdüse tauschen, Produkt Typ: Drosselkit 11 kW für Aprilia RS125, RM Lieferumfang: TÜV-Gutachten + alle notwenigen Umbauteile (mit vorgedrucktem Typenschildaufkleber)
alpha Technik Drosselkit 11 kW für Aprilia SX125 / RX125, SX
alpha Technik Drosselkit 11 kW für Aprilia SX125 / RX125, SX Umrüstsatz mit Gutachten für Aprilia SX125 / RX125, Fzg.Typ: SX, ab Modelljahr 2008-, EG-BE-Nr.:e11*2002/24*0747*, von 16,7kW/120km/h auf 11kW/105km/h Produktkennzeichnung: Leistungsä. Leichtkrafträder Geänderte Fahrzeugteile: Black Box einbauen, Hauptdüse tauschen, Produkt Typ: Drosselkit 11 kW für Aprilia SX125 / RX125, SX Lieferumfang: TÜV-Gutachten + alle notwenigen Umbauteile (mit vorgedrucktem Typenschildaufkleber)
alpha Technik Drosselkit 11kW für Aprilia AF1 125 Futura, FM
alpha Technik Drosselkit 11kW für Aprilia AF1 125 Futura, FM "Motorradland" Umrüstsatz für Aprilia AF1 125 Futura, Fzg.Typ: FM, von 18 kW bei 10000/ min auf 11 kW/121 km/h bei 10000/ min, mit EBE, ab Bj. 1992, mit Teilegutachten Produktkennzeichnung: Leistungsä. Leichtkrafträder Geänderte Fahrzeugteile: MOTORRADLAND: Drosselblende Einlaß + Auslaß, Ritzel Produkt Typ: Drosselkit 11 kW für Aprilia AF1 125 Futura, FM Lieferumfang: TÜV-Gutachten + alle notwendigen Umbauteile
alpha Technik Drosselkit 11kW für Aprilia MX 125, TZ
alpha Technik Drosselkit 11kW für Aprilia MX 125, TZ HVI Umbausatz mit Gutachten (HVI ist per Gameboy programmierbar) für Aprilia MX125 Fzg.Typ: TZ, Abgasnorm: Euro2, ab Modelljahr 2004, von 18kW/130km/h auf 11kW/108km/h, EG-BE-Nr.:e11*92/61*0096* (mit vorgedrucktem Typenschildaufkleber) Produktkennzeichnung: Leistungsä. Leichtkrafträder Geänderte Fahrzeugteile: Blackbox, Adapterkabel, HVI Umbausatz mit Gutachten (HVI ist per Gameboy programmierbar) Produkt Typ: Drosselkit 11kW für Aprilia MX 125, TZ Lieferumfang: TÜV-Gutachten und alle notwendigen Umbauteile, mit vorgedrucktem Typenschildaufkleber
