CL Brakes Racing sintered metal brake pads - 1033C60
C60 series, for racing use only
Factory Links wheel bearing set
Bearing set for front wheel FACTORY LINKS bearings are packed with a heavy-duty premium marine grease and an additive of a special complex thickener that allows it to be virtually waterproof. It provides unsurpassed rust and corrosion protection. Also to keep out any moisture, we've gone from a 30% grease fill to a 60% for harsh conditions. Our FACTORY LINKS ball bearings are specifically designed for off-road use, unlike industrial 2RS ball bearings which offer low torque resistance and therefore low resistance to water ingress.
HIGHSIDER pro Akron-LS handlebar weights
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-LS handlebar weights red (pair)
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-LS handlebar weights silver (pair)
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-LS handlebar weights titanium (pair)
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-LS handlebar weights titanium (pair)
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mounting for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-XL handlebar weights black (pair)
HIGHSIDER AKRON-XL Handlebar weights - Styling for your bike -With these elegantly designed handlebar ends, you can customize your bike in detail. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, they are universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm.Our accessory tip:Excellent in combination with the visually coordinated designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and make your motorcycle cockpit an eye-catcher.Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 34 mm Scope of delivery: 1 pair incl.2 clamping sleeves each with D. 12 mm and D. 16 mm2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm2 x M6 central bolts2 x M6 conical nutsNOTE:For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar.Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-XL handlebar weights red (pair)
HIGHSIDER AKRON-XL Handlebar weights - Styling for your bike -With these elegantly designed handlebar ends, you can customize your bike to your liking. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, they are universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm.Our accessory tip:Excellent in combination with the visually coordinated designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and make your motorcycle cockpit an eye-catcher.Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 34 mm Scope of delivery: 1 pair incl.2 clamping sleeves each with D. 12 mm and D. 16 mm2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm2 x M6 central bolts2 x M6 conical nutsNOTE:For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar.Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-XL handlebar weights titanium (pair)
HIGHSIDER AKRON-XL Handlebar weights - Styling for your bike -With these elegantly designed handlebar ends, you can customize your bike in detail. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, they are universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm.Our accessory tip:Excellent in combination with the visually coordinated designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and make your motorcycle cockpit an eye-catcher.Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 34 mm Scope of delivery: 1 pair incl.2 clamping sleeves each with D. 12 mm and D. 16 mm2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm2 x M6 central bolts2 x M6 conical nutsNOTE:For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar.Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-XL handlebar weights titanium (pair)
HIGHSIDER AKRON-XL Handlebar weights - Styling for your bike -With these elegantly designed handlebar ends, you can customize your bike in detail. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, they are universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm.Our accessory tip:Excellent in combination with the visually coordinated designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and make your motorcycle cockpit an eye-catcher.Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 34 mm Scope of delivery: 1 pair incl.2 clamping sleeves each with D. 12 mm and D. 16 mm2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm2 x M6 central bolts2 x M6 conical nutsNOTE:For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar.Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-XS handlebar weights red (pair)
HIGHSIDER AKRON-XS motorcycle handlebar weights - Styling for your bike - With these elegantly designed handlebar ends, you can customize your bike in detail according to your ideas. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, they are universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike to your liking.Dimensions:Handlebar weight Ø: 37.4 mm Width: 17 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-XS handlebar weights silver (pair)
HIGHSIDER AKRON-XS motorcycle handlebar weights - Styling for your bike - With these elegantly designed handlebar ends, you can customize your bike in detail according to your ideas. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, they are universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike to your liking.Dimensions:Handlebar weight Ø: 37.4 mm Width: 17 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-XS handlebar weights titanium (pair)
HIGHSIDER AKRON-XS motorcycle handlebar weights - Styling for your bike - With these elegantly designed handlebar ends, you can customize your bike in detail according to your wishes. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, they are universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike to your liking.Dimensions:Handlebar weight Ø: 37.4 mm Width: 17 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro Akron-XS handlebar weights titanium (pair)
HIGHSIDER AKRON-XS motorcycle handlebar weights - Styling for your bike - With these elegantly designed handlebar ends, you can customize your bike in detail according to your wishes. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, they are universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory tip: Excellent in combination with the visually coordinated designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike to your liking.Dimensions:Handlebar weight Ø: 37.4 mm Width: 17 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central bolts 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER pro bar end mirror Conero 2 Black Edition Black Matt Long (1pc.)
HIGHSIDER CONERO 2 handlebar end mirror, long, E-approvedAvailable in black anodized with polished bevels or the all-black matt BLACK EDITION -CNC-milled handlebar end mirror with a round head made of anodized aluminium. With the second generation of the popular CONERO handlebar end mirror, you can choose your own mounting method. Either directly to a 7/8, 1 inch handlebar with the supplied reducing sleeves or to the optionally available handlebar end weights HIGHSIDER DOT, HIGHSIDER CURVE and HIGHSIDER CONERO TYPE 2. The mirror can be used on the left and right. Our HIGHSIDER CONERO series is characterized by a minimalist design and fits perfectly with uncovered motorcycles. The beautifully shaped and high-quality aluminum add-on parts give your roadster a face and character. The HIGHSIDER CONERO series brings you back to the time when a motorcycle was simply allowed to be a motorcycle - reduced to riding, experiencing and experiencing.Prudence with style - whether classic or modern. The HIGHSIDER mirror series are characterized by their striking design and aerodynamic function. So you can keep an overview.Dimensions: A: Head diameter: 98 mm B: Head diameter: 98 mm C: Overall width: 60 mm D: Total height: 180 mm Handle length center - center: 120 mm Scope of delivery: 1 piece, incl. 1 x adapter for 7/8 inch 1 x adapter for 1 inch Note:Tightening torque for the M4 screw: 3-5 Nm
HIGHSIDER pro bar end mirror Conero 2 black long (1pc.)
HIGHSIDER CONERO 2 handlebar end mirror, long, E-approvedAvailable in black anodized with polished bevels or the all-black matt BLACK EDITION -CNC-milled handlebar end mirror with a round head made of anodized aluminium. With the second generation of the popular CONERO handlebar end mirror, you can choose your own mounting method. Either directly to a 7/8, 1 inch handlebar with the supplied reducing sleeves or to the optionally available handlebar end weights HIGHSIDER DOT, HIGHSIDER CURVE and HIGHSIDER CONERO TYPE 2. The mirror can be used on the left and right.Our HIGHSIDER CONERO series is characterized by a minimalist design and fits perfectly with uncovered motorcycles. The beautifully shaped and high-quality aluminum add-on parts give your roadster a face and character. The HIGHSIDER CONERO series brings you back to the time when a motorcycle was simply allowed to be a motorcycle - reduced to riding, experiencing and experiencing.Prudence with style - whether classic or modern. The HIGHSIDER mirror series are characterized by their striking design and aerodynamic function. So you can keep an overview.Dimensions:A/B Ø head: 98 mmC Total width: 60 mmD Total height: 180 mmHandlebar length center - center: 120 mmScope of delivery: 1 piece, incl.1 x adapter for 7/8 inch1 x adapter for 1 inchNote:Tightening torque for the M4 screw: 3-5 Nm
HIGHSIDER pro bar end mirror Conero 2 black short (1pc.)
HIGHSIDER CONERO 2 handlebar end mirror, short - BLACK EDITION - The all-black edition for those who like to look black. CNC-milled handlebar end mirror with a round head made of anodized aluminium in matt black. The mirror arm is equipped with three stylish air slits and a joint on the clamp provides additional adjustment options for a good view. With the second generation of the popular HIGHSIDER CONERO handlebar end mirror, you can choose your own mounting method. Either directly to a 7/8, 1 inch or 22 mm 25.4 mm handlebar with the supplied reduction sleeves or to the optionally available handlebar end weights HIGHSIDER DOT, HIGHSIDER CURVE and HIGHSIDER CONERO TYPE 2. The mirror can be used on the left and right. Our HIGHSIDER CONERO series is characterized by a minimalist design and fits perfectly with uncovered motorcycles. The beautifully shaped and high-quality aluminum add-on parts give your bike a face and character. The HIGHSIDER CONERO series brings you back to the time when a motorcycle was simply allowed to be a motorcycle - reduced to riding, experiencing and experiencing. Prudence with style - whether classic or modern. The HIGHSIDER mirror series is characterized by its striking design and aerodynamic function. So you can keep an overview. Dimensions: A/B Head diameter: 98 mm C Total width: 120 mm D Total height: 100 mm Handle length center - center: 85 mm
HIGHSIDER pro bar end mirror Conero Black (1pc)
HIGHSIDER CONERO handlebar end mirror, E-approved CNC-milled handlebar end mirror with a round head made of black anodized aluminium. Combined with polished chamfers, this model stands for a classy, stylish design. Suitable for handlebars with an inner diameter of 12 to 22 mm. In other words, for most 7/8 inch and 1 inch aluminum or steel handlebars. Ideal visibility thanks to curved glass with a slight tint. The mirror can be used on the left and right. Our HIGHSIDER CONERO series is characterized by a minimalist design and fits perfectly with uncovered motorcycles. The beautifully shaped and high-quality aluminum add-on parts give your roadster a face and character. The HIGHSIDER CONERO series brings you back to the time when a motorcycle was simply allowed to be a motorcycle - reduced to riding, experiencing and experiencing. Prudence with style - whether classic or modern. The HIGHSIDER mirror series is characterized by its striking design and aerodynamic function. So you can keep an overview. DimensionsTotal width: 60 mmTotal height 180 mmDiameter head: 98 mmStem length center - center: 118 mm
HIGHSIDER pro bar end mirror Esagano-RS black/black long (1pc.)
HIGHSIDER ESAGANO-RS handlebar end mirror, long, E-approved Rising and flat trapezoids create the futuristic design of the HIGHSIDER ESAGANO-RS mirror series, which picks up on the design language of modern motorcycles. The base body of the mirror head is made of high-quality plastic and frames the striking inlay, which is CNC-machined from aluminum. This symbolizes the design language of the ESAGANO product family and creates a unique recognition value with its rising and flat geometries. The bead-blasted and matt black anodized surface of the aluminium contrasts with the surface of the mirror head and completes the picture. The long handlebar end stem in aluminum embodies design and function. The forces acting on the mirror while riding are dissipated particularly effectively via binomial structures using tension and pressure points. At the same time, this structure reduces the weight of the mirror stem and also creates a harmonious overall appearance. The handlebar end mirror can be mounted both upright and hanging on the handlebars. The mirror is mounted using the visually matching ESAGANO-LS handlebar weight with 12 mm stem mount or a handlebar weight in an alternative design from our product range. If there is sufficient space, the mirror can also be mounted directly on the handlebars using the aluminum adapter rings supplied Dimensions: A Head width: 118 mm B Height head: 92 mm C Total width: 90 mm D Overall height: 169 mm Scope of delivery: 1 piece handlebar end mirror incl. Reducing ring 7/8 inch Reducing ring 1 inch Tip: Please use the HIGHSIDER sealing caps to close any holes for fastening the original handlebar mirrors.
HIGHSIDER pro bar end mirror Esagano-RS black/black short (1pc.)
HIGHSIDER ESAGANO-RS handlebar end mirror, short, E-approved Rising and flat trapezoids create the futuristic design of the HIGHSIDER ESAGANO-RS mirror series, which picks up on the design language of modern motorcycles. The base body of the mirror head is made of high-quality plastic and frames the striking inlay, which is CNC-machined from aluminum. This symbolizes the design language of the ESAGANO product family and creates a unique recognition value with its rising and flat geometries. The bead-blasted and matt black anodized surface of the aluminium contrasts with the surface of the mirror head and completes the picture. The short aluminum handlebar end stem has a versatile adjustment range, allowing the mirror head to be aligned in the right position for your bike and can be mounted both upright and hanging on the handlebars. The mirror is mounted using the visually matching ESAGANO-LS handlebar weight with 12 mm stem mount or a handlebar weight in an alternative design from our product range. If there is sufficient space, the mirror can also be mounted directly on the handlebars using the aluminum adapter rings supplied. Dimensions: A Head width: 118 mm B Height head: 92 mm C Total width: 139 mm D Total height: 145 mm Scope of delivery: 1 piece handlebar end mirror Reducing ring 7/8 inch Reducing ring 1 inch Tip: Please use the HIGHSIDER sealing caps to close any holes for fastening the original handlebar mirrors.
