Alurack top case carrier black for BMW M 1000 XR (24-) Hepco & Becker
Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for mounting Hepco & Becker top cases or soft luggage (not suitable for top cases with universal plastic plate). Hepco & Becker aluminum racks are specially designed for Hepco & Becker top cases. As the successor to the tried and tested tubular luggage racks, the Alurack is seen as a logical further development and is offered for the younger generation of motorcycles. Each Alurack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorcycle. Thanks to the production from high-quality aluminum in combination with a steel base carrier, the Alurack has a high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. Details: Solid construction No additional adapters are required for top case mounting High-quality surface finish Recommended payload: 5 kg payload in the top case (please observe vehicle-specific information, the stored installation instructions and motorcycle manufacturer information) Technically almost identical to the Easyrack top case carrier, except that the bracket for holding the top case is fixed at the top and cannot be folded down The model-specific base carrier is the same for the Easyrack and Alurack A special bracket is required to mount the aluminum standard top case 35 (article number: 700007350 or 700007351) Luggage carriers do not require an ABE or registration Recommended top speed: 130 km/h Weight: 3.1 kg Color: black Scope of delivery: Model-specific Alurack top case carrier + mounting kit + mounting instructions Notes: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators.
Alurack top case carrier for original luggage rack for BMW S 1000 XR (24-) Hepco & Becker
Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for mounting Hepco & Becker top cases or soft luggage (not suitable for top cases with universal plastic plate). Hepco & Becker aluminum racks are specially designed for Hepco & Becker top cases. As the successor to the tried and tested tubular luggage racks, the Alurack is seen as a logical further development and is offered for the younger generation of motorcycles. Each Alurack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorcycle. Thanks to the production from high-quality aluminum in combination with a steel base carrier, the Alurack has a high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. Details: Solid construction No additional adapters are required for top case mounting High-quality surface finish Recommended payload: 5 kg payload in the top case (please observe vehicle-specific instructions, the stored installation instructions and motorcycle manufacturer's specifications) Technically almost identical to the Easyrack top case carrier, except that the bracket for holding the top case is fixed at the top and cannot be folded down The model-specific base carrier is the same for the Easyrack and Alurack A special bracket is required to mount the aluminum standard top case 35 (article number: 700007350 or 700007351) Luggage carriers do not require an ABE or registration Recommended top speed: 130 km/h Weight: 2.6 kg Color: black Scope of delivery: Model-specific Alurack top case carrier + mounting kit + mounting instructions Notes: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag Developed for the standard condition of the machine. Not tested with accessories such as: exhaust, license plate holder or other indicators
ARROW INDY RACE EVO Titanium Exhaust with Carbon End Cap for BMW M 1000 XR (25-)
ARROW INDY RACE EVO Rear Muffler with titanium shell and carbon fiber end cap, featuring a dB-Killer insert, street-legal, for BMW M1000 XR, Type: SX99, Model Year 2025- Arrow Exhaust has updated its INDY RACE product line and launched it with a new look and improved technical features: the result is the INDY RACE EVO.One of Arrow’s most distinctive mufflers has been redesigned to become an absolute, versatile icon that can be used on any type of motorcycle. The signature shape, inspired by the oval of the famous American racetracks (hence the name INDY), has been redesigned to incorporate several new features, such as the side notch, which gives the muffler a fantastic look and increases its durability and rigidity.New carbon fiber end caps are available alongside the end caps already offered for the INDY-RACE lineup, allowing the muffler’s design to be adapted to any motorcycle. Many INDY-RACE mufflers are still available with the “old” stainless steel cap featuring an external, curved outlet pipe.Features: Materials and finishes for the muffler body: titanium in a satin finish or “TITAN DARK,” or aluminum with a transparent anodized finish or as a “DARK” version (see product description) Internal structure made of stainless steel alloy End cap made of carbon fiber or stainless steel (“old” style with external, curved outlet pipe) Side notch Available for racing or with street legal certification (see product description) Laser-etched Arrow logo
C-Bow side carrier for BMW S 1000 XR (24-) Hepco & Becker
The C-Bow side bag holder is designed to hold a variety of Hepco & Becker bags. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorcycle and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions. Features: Solid side carrier for mounting Hepco & Becker C-Bow side bags and panniers High-quality surface finish Normal Hepco & Becker hard cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended payload: 5 kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorcycle manufacturer's specifications for any restrictions that may apply) Can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage carriers do not require an ABE or registration in the papers Weight: 3.3kg Color: black Scope of delivery: Left, right, mounting material and instructions Notes: Can also be combined with original luggage rack. Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.
Clear windshield - height 555 mm for BMW S 1000 XR (20-) / M 1000 XR (24-)
Specific windshield - transparent - size: 550 x 460 mm (H x W) - replaces the original windshield- ABE 38743 - For M 1000 XR (24-) ABE in preparation A C H T U N G, important note: This ABE is only valid for windscreens produced for the German market and sold here in Germany. The ABE is not valid for windscreens purchased abroad. Illustrations of windshields in our catalogs, on our websites, sales documents and advertisements always show the international version of the windshields, but not the possibly modified form of the German version. GIVI products were developed for vehicles in their original condition. Compatibility with accessories from other manufacturers such as exhaust systems etc. cannot be guaranteed We recommend that installation is carried out by a specialist mechanic.
Easyrack top case carrier for original luggage rack for BMW S 1000 XR (24-) Hepco & Becker
Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for mounting Hepco & Becker top cases or soft luggage (not suitable for top cases with universal plastic plate). Each Easyrack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorcycle. Thanks to the production from high-quality aluminum in combination with a steel base carrier, the Easyrack has a high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. Details: Solid basic construction made of steel and an aluminum carrier plate No additional adapters are required for top case mounting High-quality surface finish Technically almost identical to the Alurack top case carrier, except that the bracket for top case mounting can be folded in when not in use and the Alurack bracket stands rigidly upwards The model-specific base carrier is the same for the Easyrack and Alurack Luggage carriers do not require an ABE or registration Recommended payload: 5 kg payload (please observe model-specific information, the stored assembly instructions and motorcycle manufacturer information) Recommended maximum speed: 130 km/h Weight: 2.7 kg Color: black Scope of delivery: Model-specific Easyrack Topcaseträger + mounting kit + mounting instructions Notes: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators.
Easyrack Topcaseträger black for BMW M 1000 XR (24-) Hepco & Becker
Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for mounting Hepco & Becker top cases or soft luggage (not suitable for top cases with universal plastic plate). Each Easyrack top case carrier is developed specifically for each model and therefore blends in harmoniously with the overall appearance of the motorcycle. Thanks to the production from high-quality aluminum in combination with a steel base carrier, the Easyrack has a high strength and a very elegant appearance. Additional attachment points for luggage straps, for example to attach luggage rolls, are integrated into the design of the rack. Details: Solid basic construction made of steel and an aluminum carrier plate No additional adapters are required for top case mounting High-quality surface finish Technically almost identical to the Alurack top case carrier, except that the bracket for top case mounting can be folded in when not in use and the Alurack bracket stands rigidly upwards The model-specific base carrier is the same for the Easyrack and Alurack Luggage carriers do not require an ABE or registration Recommended payload: 5 kg payload (please observe model-specific information, the stored installation instructions and motorcycle manufacturer information) Recommended maximum speed: 130 km/h Weight: 3.2 kg Color: black Scope of delivery: Model-specific Easyrack Topcaseträger + mounting kit + mounting instructions Notes: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators.
Engine guard incl. protection pad black for BMW M 1000 XR (24-) Hepco & Becker
Whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco & Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps. More than that: in the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage. The Hepco & Becker mudguards perfectly trace the lines of the machine, giving the motorcycle an individual character. Made from an extremely stable tube-in-tube construction, manufactured from German quality steel or stainless steel, they offer maximum protection - with many newer models already featuring an integrated crash pad. Exclusive look thanks to high-quality surface finish: high-quality powder coating from Germany.On top of that, motorcycle protection bars are incredibly well suited to securely lashing your bike to a trailer if you ever need to transport it. Features: Material: Tubular steel made in Germany Surface finish: High-quality powder coating Effectively protects in the event of minor accidents or mishaps Helpful when lashing the motorcycle Comprehensive and easy-to-understand assembly instructions Crash bars are registration-free - so they do not need to be entered in the papers and therefore do not require an ABE Weight: 3.3 kg Color: black Scope of delivery: right + left incl. mounting material (spacers, sleeves, washers etc.) and Installation instructions Notes: In combination with the original auxiliary headlights, the protection pads are not required. Please observe the model-specific information listed in the installation instructions and properties! Unless explicitly stated otherwise, Hepco & Becker model-specific products have only been developed for the standard condition of the motorcycle! For safety reasons, all protection bars should be adequately checked after a crash and replaced if necessary. If original or accessory parts have already been fitted, there may be restrictions; these can be found in the fitting instructions.
Engine guard incl. protection pad for BMW S 1000 XR (24-) Hepco & Becker
Whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco & Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps.More than that: In the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage.The crash bars from Hepco & Becker perfectly trace the lines of the machine and thus give the motorcycle an individual character. Made from an extremely stable tube-in-tube construction, with integrated crash pad.Various surface finishes are available depending on the vehicle model. protects against crashes and falls helpful when lashing the motorcycle high-quality metal coating solid construction, manufactured MADE IN GERMANY in our factory in Pirmasens comprehensive and easy-to-understand assembly instructions Scope of delivery: right + left incl. mounting material and instructions please refer to the stored installation instructions or the vehicle-specific information for any restrictions or instructions that may apply no ABE or registration is required
Grip protection for BMW S 1000 XR (24-) Hepco & Becker
The Hepco & Becker grip guard provides reliable protection for the rider's hands and the motorcycle handlebars both when riding off-road and on asphalt. powder-coated solid construction made of tubular steel Made in Germany Scope of delivery: right + left + instructions + mounting material usually only fits vehicles with original handlebar clamps please follow the installation instructions and the vehicle-specific instructions If a handlebar riser is installed, mounting is also possible in most cases. To do this, longer bolts are required for installation, depending on the handlebar riser. You will need to obtain these screws yourself, as we do not have all screws available in all suitable lengths.
LED auxiliary headlight Nova incl. universal mounting for tube Ø18-25mm Hepco & Becker
With the Nova LED auxiliary headlight set from Hepco & Becker, you get everything you need to improve the visibility and safety of your motorcycle. This set includes powerful LED auxiliary headlights, a universal mounting set, a cable set, a switch, instructions and a tool set to conveniently mount and control the headlights. The Nova LED auxiliary headlights not only provide improved illumination of the road, but also give your motorcycle an attractive appearance. Easy installation is made possible by the universal mounting kit and cable set supplied. Increase your safety and add an appealing design to your motorcycle by using the Hepco & Becker LED auxiliary headlight set Nova.The brand new Nova LED auxiliary headlight - the next step in lighting technology. High-power LEDs with two switching levels at 2,500lm - 4,350K / - 5,500K 12 volt, 25 watts per headlight ECE-tested and approved, so no individual approval is required (observe country-specific legal regulations for installation) Improved lighting conditions in road traffic Universal mounting on engine or tank protection bracket with Ø18mm - Ø25mm tube, can be mounted upright or suspended complete headlight set; incl. 2x LED auxiliary headlights, 1x switch, 1x cable set, 2x clamps incl. reduction sleeves, 1x instructions, 1x tool set Connection only via the battery, no connection to vehicle wiring harness required No third-party operation thanks to special control unit with automatic voltage control Waterproof and dustproof to IP67 Headlights can be added flexibly via the switch on the handlebars Additional information: Regulations according to §50 StVZO: Auxiliary lights may be mounted a maximum of 250 mm from the center of the vehicle and at the height of the main headlight. Under these conditions, mounting on the crash bar is also permitted, which provides more effective illumination. Our headlights can be operated as fog lights or as additional high beams. Please note here: While there is no restriction on the number of permissible fog lights, only one additional high beam may be operated on the motorcycle, which must be coupled to the high beam of the main headlight. Operation as a fog light can be switched with the main beam or dipped beam. For these reasons, we offer sets with 2 headlights as fog lights, which are operated with their own switch. The headlights must have the E-mark in order to be operated. Our LED auxiliary headlights have a corresponding test mark and are therefore registration-free. Detailed installation instructions with wiring diagram are included with the headlights. Everything is pre-assembled, without soldering. It is not necessary to cut any cables. The on/off switch is attached to the fittings. The headlights must be adjusted during a test drive in the dark so that other road users are not dazzled. We recommend visiting a specialist workshop for this. Note: The lights can only be switched on approx. 5-15 seconds after starting the engine. A voltage of at least 13.1 V must be applied to the control unit of the wiring harness to enable the circuit. In older vehicles, this can be achieved by briefly increasing the engine speed. Switching off must be done manually at the switch. The NOVA LEDs remain lit until the voltage limit of 11.8 V is reached, even after the engine has been switched off. Only when the voltage falls below this limit do the lights switch off automatically via the control unit. When the motor is switched on again (wait for the control unit dwell time), the voltage limit of 13.1 V is queried again.
Original molded windscreen MRA "OM" for BMW M 1000 RR 2025-
The 44cm long MRA racing screen has a clear elevation in the middle of the screen - the so-called "double bubble". On this dynamic racing motorcycle, it simply fits perfectly with the overall design of the motorcycle. Available in clear, colorless and black. Details: ABE: Yes Grid printing: No Length in mm: 320 Width in mm: 330 Scope of delivery: Original molded disc "OM"
Protection for stainless steel water and oil radiators for BMW S 1000 XR (20-) / M 1000 XR (24-)
Specific protection for stainless steel water and oil radiators, black. Important note: GIVI products were developed for vehicles in their original condition. Compatibility with accessories from other manufacturers such as exhaust systems etc. cannot be guaranteed. We recommend that installation is carried out by a specialist mechanic.
SHAD Tank Click System
Das Click System von SHAD ist die Weiterentwicklung der Befestigungssysteme für Tankrucksäcke. Neben der einfachen Handhabung und der Integration in das Motorrad zeichnet es sich durch den Push Button aus, mit dem sich der Tankrucksack durch einfaches Drücken schnell entriegeln lässt.
Shad Top Case Mounting Kit for BMW M 1000 XR (24-25) / S 1000 XR (20-25)
The SHAD Top Case Mounting Kit W0SR10ST allows you to mount a SHAD top case on your motorcycle. It is a mounting system specifically designed for each motorcycle model, taking into account its specific characteristics. The result is a high-quality, convenient, and secure product that is easy to install and remove. To mount the top case on the motorcycle, you must use the mounting plate included with the SHAD case (except for the TR55, TR50, TR48, and TR37). Note: Compatible with the model featuring original side handles
Side case carrier for BMW S 1000 XR (24-) Hepco & Becker
The Hepco & Becker Lock-it side case carrier - Made from German tubular steel and custom-made laser-cut parts, which are reinforced in areas subject to high stress. The carriers can be fitted and removed in a matter of seconds. All you have to do is loosen the attached Lock-it screws with a quarter turn and the side parts can be removed to the rear or to the side. As theft protection, you can optionally protect the carrier from thieves with Hepco & Becker lockable Lock-it screws. All cases are locked to the carrier using a retaining lock on the case. This requires the lock adapters which are normally included with the case. The lock adapters are screwed to the right and left of the carrier and then provide a fastening option for the case's retaining locks. Details: Sturdy construction MADE IN GERMANY Quickly removable, only inconspicuous small tabs remain on the motorcycle High-quality surface finish Generally easy to fit, please refer to the fitting instructions provided Please refer to the vehicle-specific information or the installation instructions for any restrictions Fits most Hepco & Becker hard-shell side cases (please refer to the model-specific information on the respective carrier for any restrictions that may apply) Luggage systems generally do not require an ABE or registration Recommended payload: 10kg in each side case Tube diameter: 16mm Color: black Weight: 3.8kg Scope of delivery: Right + left incl. mounting material and instructions
Side stand plate for BMW M 1000 XR (24-) Hepco & Becker
Especially when fully loaded or on unpaved surfaces, the motorcycle can easily sink and tip over on the side stand. To free your motorcycle from this danger, we recommend a model-specific, shaped side stand plate from Hepco & Becker. By enlarging the side stand support to approximately double the surface area compared to the original stand, your motorcycle is perfectly protected against mishaps when parking. Details: Material: Aluminum & powder-coated steel Secure standing of the machine on all surfaces Effective protection when parking Quick and easy installation with just a few screws Does not require ABE or registration Color: black / silver Weight: 0.2 kg
Side stand plate for BMW S 1000 XR (24-) Hepco & Becker
Especially when fully loaded or on unpaved surfaces, the motorcycle can easily sink on the side stand.We now offer a precisely milled widening plate that can be quickly bolted to the side stand and eliminates this danger!The Hepco & Becker side stand support extension! more than twice as much contact surface in some cases secure stand of the machine on all surfaces Oxidation-proof anodized aluminium and black-coated upper steel counter-holder simple installation with just a few screws requires no ABE or registration
Smartrack rear carrier black for BMW M 1000 XR (24-) Hepco & Becker
Hepco&Becker Smartrack black: for mounting on existing Hepco&Becker tube adapters. Can be mounted instead of aluminum, Easy or Minirack. The facts: Ideal for attaching small soft luggage and rear bags to the rear of the motorcycle Rear bags can be simply clicked on using the Basic rear bag attachment (Art.:516200) Slots on the side for lashing luggage High stability, high-quality look Made of plastic Comprehensive, easy-to-understand mounting instructions Scope of delivery: Smartrack + mounting kit + instructions Luggage systems generally do not require an ABE or registration in the papers
SW-Motech PRO Tank Ring for BMW M 1000 XR
The PRO Tank Ring perfectly combines the innovative strength of two German companies: The QUICK-LOCK locking mechanism of SW-MOTECH tank rings—which has proven itself over many years—is now even easier to operate thanks to the magnetic guide provided by Fidlock technology. The positioning of the upper ring has been significantly improved: The sliding upper ring comes pre-mounted on a guide rail attached to the tank bag, eliminating the need to drill into the tank bag. This allows the top ring to be individually aligned on the guide rail on the underside of the tank bag. Once the correct position is found, the top ring is securely screwed into place. When switching to a different motorcycle, the position of the top ring can be adjusted accordingly.The magnetic guide, developed by Fidlock, complements SW-MOTECH’s already sophisticated mechanical QUICK-LOCK latch: The magnets guide the top ring into the correct position on the tank ring, and the latch snaps securely into place. In this way, the force of the magnets helps position the tank bag. Secure the tank bag in a single step and hit the road—your luggage stays securely in place, and it’s fun, too.The mechanical locking mechanism secures the tank bag, and the magnets guide the two parts of the ring together. The robust glass-fiber-reinforced plastic, with its high-precision locking geometry, ensures that the tank bag remains firmly in place in all riding conditions.The patented PRO Tank Ring is tailored to the fuel filler neck of the specific motorcycle model. This ensures the best possible positioning on the tank. Model-specific adapter ring for the best fit and customized solutions Easy installation on the fuel filler neck Magnetic guide in the PRO Tank Ring for easy attachment Quick release via a pull strap allows the PRO tank bag to be removed in a single step The patented PRO Tank Ring provides a secure hold for PRO tank bags Easy refueling; the fuel cap opens as usual Made of glass-fiber-reinforced polyamide Paint-friendly solution: the tank bag does not rest directly on the tank Packagecontents: 1 x PRO Tank Ring Installation instructions Mounting hardware Details: Material: fiberglass-reinforced plastic / aluminum Color: black Weight: approx. 0.1 kg Note: The PRO Series tank rings are not compatible with the EVO tank bags.
Tank ring BASIC for BMW S 1000 XR (24-) Hepco & Becker
This functional tank ring enables the attachment of a tank bag from Hepco & Becker. The scope of delivery includes a BASIC tank ring and the counterholder, which can be individually screwed to the tank bag depending on the tank shape and handlebar angle. The tank cap can still be opened without any problems when the tank ring is fitted. Features: Absolutely secure hold, even at high speeds Simple operation thanks to mechanical locking mechanism The Hepco & Becker tank bag is simply put on and locks clearly audible on the tank ring Unlocking: The mechanism is unlocked by a strap at the front of the tank bag in the direction of travel and the tank bag is then simply removed Tank bag systems do not require an ABE or registration in the papers in Germany. Recommended maximum speed with tank bag fitted: 130 km/h Recommended load in the tank bag: approx. 3kg Weight: 0.3kg Please observe the motorcycle manufacturer's specifications as well as the model-specific information in the instructions or here with the product Difference between Lock-it and BASIC tank rings: The general function and operation remains the same. However, compared to the Lock-it tank ring, the Basic tank ring only locks mechanically. With the Lock-it tank ring, the magnets help with centering. The difference lies purely in the two magnetic or plastic domes that are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions. Notes: Identical in construction to universal tank ring 516021-6 A tank bag with Lock-it counterholder cannot be mounted on a BASIC tank ring and vice versa. The tank bag counterholder and tank ring must be from the same system.
Tank ring Basic incl. tank bag closure unit for BMW M 1000 XR (24-) Hepco & Becker
This functional tank ring enables the attachment of a tank bag from Hepco & Becker. The scope of delivery includes a BASIC tank ring and the counterholder, which can be individually screwed to the tank bag depending on the tank shape and handlebar angle. The tank cap can still be opened without any problems when the tank ring is fitted. Features: absolutely secure hold, even at high speeds Simple operation thanks to mechanical locking mechanism the Hepco & Becker tank bag is simply put on and locks clearly audible on the tank ring Unlocking: The mechanism is unlocked by a strap at the front of the tank bag in the direction of travel and the tank bag is then simply removed Tank bag systems do not require an ABE or registration in the papers in Germany. Recommended maximum speed with tank bag fitted: 130 km/h Recommended load in the tank bag: approx. 3.0 kg Weight: 0.3 kg Please note the motorcycle manufacturer's specifications and the model-specific information on the instructions or here with the product Difference between Lock-it and BASIC tank rings: The general function and operation remains the same. However, compared to the Lock-it tank ring, the Basic tank ring only locks mechanically. With the Lock-it tank ring, the magnets help with centering. The difference lies purely in the two magnetic or plastic domes that are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions. Notes: Identical in construction to universal tank ring 516021-6 A tank bag with Lock-it counterholder cannot be mounted on a BASIC tank ring and vice versa. The tank bag counterholder and tank ring must be from the same system.
Topcase carrier for Monokey/Monolock case for BMW M 1000 XR (25)
Specific top case carrier for MONOKEY® or MONOLOCK® casesto be mounted with: MONOKEY® plate M5, M8A, M8B, M9A, M9B or MONOLOCK® plate M5M and M6M or Carrier made of anodized aluminium EX2M Important note: The carrier is supplied without accessories (case, plate ...)! GIVI products were developed for vehicles in their original condition. Compatibility with accessories from other manufacturers such as exhaust systems etc. cannot be guaranteed. We recommend that installation is carried out by a specialist mechanic.
Touring windshield MRA "TM" for BMW M 1000 XR 2024-
The touring windshield is usually longer and sometimes wider than the original windshield in order to better protect the rider from wind and weather. Depending on the angle of the windshield, the rear end of some models is also tilted upwards across the entire width as a wind deflector. This makes riding more relaxed, even on longer tours. Details: ABE: YES Grid printing: No Length in mm: 440 Width in mm: 400 Scope of delivery: Touring disk "TM"
