C-Bow side carrier black for Ducati Diavel 1260 /S (19-22) Hepco & Becker
The C-Bow side bag holder is designed to hold a variety of Hepco & Becker bags. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be simply and easily attached to the C-Bow with just one click and locked to prevent theft. The bags are securely fastened to the motorcycle and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions. Features: Solid side carrier for mounting Hepco & Becker C-Bow side bags and panniers High-quality surface finish Normal Hepco & Becker hard cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended load: 5 kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorcycle manufacturer's specifications for any restrictions that may apply) Can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage carriers do not require an ABE or registration in the papers Weight: 3kg Color: black Scope of delivery: Left, right, mounting material and instructions Notes: Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.
Shad 3P System side pannier rack, black painted, for Ducati Diavel 1200 (13–18)
The 3P side mounting system was developed specifically for the SH23, SH35, SH36 and SH38 side cases, as well as the Terra TR30 and TR40 side bags. During the development phase, safety was the primary focus, alongside aesthetic considerations. Integrated design: The 3P mounting system adapts perfectly to the contours of the vehicle. The typical right-angled frame has been reduced to a single arm, which supports the three points (3P) required to secure the panniers. Position: Both the volume of the case and the angle of the 3P system have been designed to shift the weight of the luggage as close as possible to the centre of the motorbike. This ensures greater safety and stability when riding with a full load. Aerodynamics: The use of three mounting points provides both stability and flexibility. This is achieved through a slight oscillation of the pannier. This allows air to circulate freely around the pannier, thereby avoiding the so-called ‘angle effect’ typical of a flat, rigid pannier. Here too, this results in improved safety and stability whilst riding. Patent pending: The uniqueness and technical innovation of the 3P system have enabled SHAD to patent it. This makes SHAD the sole manufacturer able to offer this mounting system. Main material: Steel Note:Not compatible with TR30, TR40, TR36 and TR47
Shad 3P System side pannier rack, black painted, for Ducati Diavel 1260 (19–22)
The 3P side mounting system was developed specifically for the SH23, SH35, SH36 and SH38 side cases, as well as the Terra TR30 and TR40 side bags. During the development phase, safety was the primary focus, alongside aesthetic considerations. Integrated design: The 3P mounting system adapts perfectly to the contours of the vehicle. The typical right-angled frame has been reduced to a single arm, which supports the three points (3P) required to secure the panniers. Position: Both the volume of the case and the angle of the 3P system have been designed to shift the weight of the luggage as close as possible to the centre of the motorbike. This ensures greater safety and stability when riding with a full load. Aerodynamics: The use of three mounting points provides both stability and flexibility. This is achieved through a slight oscillation of the pannier. This allows air to circulate freely around the pannier, thereby avoiding the so-called ‘angle effect’ typical of a flat, rigid pannier. Here too, this results in improved safety and stability whilst riding. Patent pending: The uniqueness and technical innovation of the 3P system have enabled SHAD to patent it. This makes SHAD the sole manufacturer able to offer this mounting system.Main material: Steel Notes: Not compatible with the S modelNot compatible with TR40, TR30, TR36 and TR47
Tank ring Basic incl. tank bag closure unit for Ducati Diavel 1260 /S (19-22) Hepco & Becker
This functional tank ring enables the attachment of a tank bag from Hepco&Becker. The scope of delivery includes a BASIC tank ring and the counterholder, which can be individually screwed to the tank bag depending on the tank shape and handlebar angle. The tank cap can still be opened without any problems when the tank ring is fitted. Features: Absolutely secure hold, even at high speeds Simple operation thanks to mechanical locking mechanism The Hepco&Becker tank bag is simply put on and locks clearly audible on the tank ring Unlocking: The mechanism is unlocked by a strap at the front of the tank bag in the direction of travel and the tank bag is then simply removed Tank bag systems do not require an ABE or registration in the papers in Germany. Recommended maximum speed with tank bag fitted: 130 km/h Recommended load in the tank bag: approx. 3kg Weight: 0.5kg Please note the motorcycle manufacturer's specifications, as well as the model-specific information in the instructions or here with the product Difference between Lock-it and BASIC tank rings: The general function and operation remains the same. However, compared to the Lock-it tank ring, the Basic tank ring only locks mechanically. With the Lock-it tank ring, the magnets help with centering. The difference lies purely in the two magnetic or plastic domes that are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions. Notes: A tank bag with Lock-it counterholder cannot be mounted on a BASIC tank ring and vice versa. The tank bag counterholder and tank ring must be from the same system.
