ARROW exhaust PRO-RACE titanium for Ducati Monster 1200 / 1200R / 1200S (16-)
ARROW PRO-RACE rear silencer (without road approval) in megaphone shape, with titanium casing with welded intermediate pipe, low version,For DucatiMonster 1200, type MA/MB, model year 2017-Monster 1200R, type MA/MB, model year 2016-Monster 1200S, type MA/MB, model year 2017-for mounting on the original manifold MotoGP set a new trend with exhaust systems in conical shape. The great demand for similar exhaust systems in hobby racing led Arrow to develop the Pro-Race series.The muffler combines a conical section with a cylindrical end piece and has a permanently welded bracket. The conical shape promises a significant reduction in dimensions as well as weight and also reduces the overall volume of the muffler, compared to stock systems.As with all Arrow exhaust systems, the elaborate TIG welding process is used - the result is a first-class power delivery and a visually appealing exhaust.
ATHENA O-ring valve cover gasket
ATHENA is one of the world's best-known manufacturers of cylinder-piston sets for 2- and 4-stroke engines. The high-performance components from this manufacturer improve engine performance while maintaining its reliability.Rocker arm cover gasket setFor a high-quality overhaulThe gaskets must always be replaced every time the engine is overhauledSupplied without screw gaskets
Blinker front left / rear right for: DUCATI MONSTER
Dimensions and properties identical to standard component.
Blinker, front right / rear left for: DUCATI MONSTER
Dimensions and properties identical to standard component.
BMC Sport air filter for Ducati Monster / Scrambler
The BMC standard air filters are made of the best materials and guarantee a much higher air flow than conventional paper filters. In the production of the performance-optimized filters, the extensive know-how from racing is used and each individual meets the highest requirements. For example, the frame of the filters cannot break, the filtering, reusable cotton fabric is impregnated with a special oil and the aluminum mesh is resistant to gasoline vapors and oxidation thanks to treatment with an epoxy solution. Why choose BMC? Better than OEM filters Better than synthetic filters Better than other cotton filters Highest quality Rigorous testing procedures ecological and economical Winner in all categories BMC operates in numerous sectors: automotive, racing, aerospace, marine and industrial, always following the specific regulations and requirements of each of the mentioned industries. Accordingly, BMC tests extremely rigorously and accurately to ensure that its air filters are of the highest possible quality. The technical solutions applied by BMC are derived from the results of continuous and intensive laboratory tests. BMC performs filtration tests according to the international standards for air filters (ISO 5011). According to these tests, BMC air filters have a 98.5 percent filtration efficiency.BMC's filter frame design is manufactured using a unique process called "full molding." This allows the striking red filter to be produced in a single molding process without having to glue the corners, which would cause breakage. On the BMC air filter protrudes the least rubber material of all filters available on the market (less than 6 mm), allowing maximum filter surface.Have a look at our YouVideo:
C-Bow side carrier black for Ducati Monster 1200 S (17-20) Hepco & Becker
The C-Bow side bag holder is designed to hold a variety of Hepco & Becker bags. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorcycle and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions. Features: Solid side carrier for mounting Hepco & Becker C-Bow side bags and panniers High-quality surface finish Normal Hepco & Becker hard cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended payload: 5 kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorcycle manufacturer's specifications for any restrictions that may apply) Can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage carriers do not require an ABE or registration in the papers Weight: 2.7 kg Color: black Scope of delivery: Left, right, mounting material and instructions Notes: Only suitable for: Royster Speed Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.
C-Bow side carrier black for Ducati Monster 1200 S (2017-)
solid side carrier for mounting Hepco&Becker C-Bow side bags and panniers high quality surface finish normal Hepco&Becker hard cases, like the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended load: 5kg per bag/case (please refer to the mounting instructions, vehicle specific instructions, as well as motorcycle manufacturer information for any restrictions that may occur) can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the mounting instructions or the vehicle-specific instructions for the respective carrier) Luggage rack extensions can restrict bag mounting on the rack Luggage carriers do not require ABE or registration in the papers Scope of delivery: left+ right + mounting instructions + mounting kit Developed for the standard condition of the machine. Not tested with accessories such as: exhaust, license plate holder or other turn signals. Note that with third-party accessories, the bags always have sufficient distance to the exhaust and the turn signals have a sufficient beam angle. The exhaust beam must not be directed at the bags.
Crash bar black for Ducati Multistrada 1200 (15-18) 950 (17-18) 950S (19-21) Givi
Specific crash bar, black / tube diameter 25 mm / We recommend that the assembly is carried out by a professional mechanic Important note:GIVI products are designed for vehicles in original condition. Compatibility with accessories from other manufacturers such as exhaust systems, etc. can not be guaranteed
Electrosport controller
The alternator stators and regulators from Electrosport enable reliable replacement of the standard component.
Electrosport stator
ElectroSport stators are designed as a direct replacement for the original equipment Manufactured for higher power loads Developed in the USA One of the best value for money
Factory Links Race Series wheel bearing set
FACTORY LINKS bearings are packed with a heavy-duty premium marine grease and an additive of a special complex thickener that allows it to be virtually waterproof. It provides unsurpassed rust and corrosion protection. Also to keep out any moisture, we've gone from a 30% grease fill to a 60% for harsh conditions. Our FACTORY LINKS ball bearings are specifically designed for on and off-road use, unlike industrial 2RS ball bearings which offer low torque resistance and therefore low resistance to water ingress.
Factory Links steering head bearing kit
Our premium kits contain all the elements required for a complete OEM quality service for your handlebar stem. Our special off-road design of tapered ball bearings and dust balls are specially manufactured to meet stringent OEM quality requirements in terms of materials, dimensional tolerances, hardness and surface roughness. Our kits restore your bicycle handlebar stem to the condition defined by the manufacturer.
Factory Links wheel bearing set
FACTORY LINKS bearings are packed with a heavy duty premium marine grease and an addition of a special complex thickeners which allows it to be virtually waterproof. It provides unsurpassed rust and corrosion protection. Also to keep any moisture out, we have gone from 30% grease filling to a 60% for harsh conditions. Our FACTORY LINKS ball bearings are specially developed for an Off-Road use, unlike Industrial 2RS type ball bearings offer low torque resistance and hence weak resistance to water intrusion.
HiFlo air filter element for Ducati Monster / Scrambler
HIFLO air filters are produced from the highest quality materials to give modern high performance engines the best performance: Maximum filtration and perfect airflow !
HIGHSIDER pro Conero Type 2 handlebar weights black (pair)
Available in glossy black with polished bevels or in matt black - BLACK EDITION - The handlebar end weights are made of CNC-milled aluminum. The HIGHSIDER CONERO TYPE 2 is supplied with a special adapter (black aluminum ring), which makes it possible to mount our HIGHSIDER handlebar end mirrors with a Ø 30 mm mount. Universally suitable for handlebars with an inner diameter of 12 to 22 mm Ø, suitable for most 7/8 inch and 1 inch aluminum or steel handlebars Our HIGHSIDER CONERO series is characterized by a minimalist design and fits perfectly with uncovered motorcycles. The beautifully shaped and high-quality aluminum add-on parts give your roadster a face and character. The HIGHSIDER CONERO series takes you back to the time when a motorcycle was simply allowed to be a motorcycle - reduced for riding, experiencing and learning. Tailor-made for your motorcycle - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions: Diameter: approx. 34.5 mm Length: 17 mm Diameter of mirror mount: 30 mm Specifications: Weight bar end weights with mounting: 132 g Color: Glossy black with polished bevels or matt black Material: Aluminum Please check the dimensions for accuracy of fit before purchasing! Scope of delivery: 2 x bar end weights. 2 x clamping sleeves D. 12 mm and D. 16 mm. 2 x centering sleeves type 1, type 2, type 3. 2 x black coated M6 central screw and M6 conical nut.
HIGHSIDER pro Conero Type 2 handlebar weights black (pair)
Available in glossy black with polished bevels or in matt black - BLACK EDITION - The handlebar end weights are made of CNC-milled aluminum. The HIGHSIDER CONERO TYPE 2 is supplied with a special adapter (black aluminum ring), which makes it possible to mount our HIGHSIDER handlebar end mirrors with a Ø 30 mm mount. Universally suitable for handlebars with an inner diameter of 12 to 22 mm Ø, suitable for most 7/8 inch and 1 inch aluminum or steel handlebars Our HIGHSIDER CONERO series is characterized by a minimalist design and fits perfectly with uncovered motorcycles. The beautifully shaped and high-quality aluminum add-on parts give your roadster a face and character. The HIGHSIDER CONERO series takes you back to the time when a motorcycle was simply allowed to be a motorcycle - reduced for riding, experiencing and learning. Tailor-made for your motorcycle - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions: Diameter: approx. 34.5 mm Length: 17 mm Diameter of mirror mount: 30 mm Specifications: Weight bar end weights with mounting: 132 g Color: Glossy black with polished bevels or matt black Material: Aluminum Please check the dimensions for accuracy of fit before purchasing! Scope of delivery: 2 x bar end weights. 2 x clamping sleeves D. 12 mm and D. 16 mm. 2 x centering sleeves type 1, type 2, type 3. 2 x black coated M6 central screw and M6 conical nut.
HIGHSIDER pro Enterprise handlebar weights gold (pair)
HIGHSIDER ENTERPRISE-EP1 handlebar weightsUniversal fit for all handlebars with an inner diameter of 12 to 22 mm - therefore for most 7/8 inch and 1 inch aluminum or steel handlebars. The perfect mount for all HIGHSIDER and SHIN YO hanging handlebar end mirrors with external clamping. The handlebar weights can of course also be used without a handlebar end mirror and can be adapted to the look of your bike, for example with one of the optionally available color rings. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions:Handlebar weightDiameter: 34.5 mm Width: 14.5 mmMirror mountDiameter: 29.8 mmWidth: 12 mmScope of delivery:2 x handlebar weights2 clamping sleeves each with 12 and 16 mm Ø2 spacer sleeves each with 14, 18 and 21 mm Ø2 x M6 central bolt2 x M6 cone nutOptional order:Color ring for handlebar weights (see accessories)Note:Please check the dimensions for accuracy of fit before purchasing
