Black rear crash bar for Honda CB 125 R (25-) Hepco & Becker
Provides good protection in the event of low-speed falls and crashes Indicator levers, clutch and brake levers, exhaust silencers, fairing parts etc. are effectively protected High-quality powder coating Includes mounting hardware Weight: 2.45 kg Colour: black
C-Bow side carrier for Honda CB 125 R (25-) Hepco & Becker
The C-Bow side bag holder is designed to hold a variety of Hepco & Becker bags. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorcycle and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions. Features: Solid side carrier for mounting Hepco & Becker C-Bow side bags and panniers High-quality surface finish Normal Hepco & Becker hard cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended payload: 5 kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorcycle manufacturer's specifications for any restrictions that may apply) Can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage carriers do not require an ABE or registration in the papers Weight: 1.6 kg Color: black Scope of delivery: Left, right, mounting material and instructions Notes: Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.
Engine guard black for Honda CB 125 R (25-) Hepco & Becker
Whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco & Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps.More than that: In the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage.The crash bars from Hepco & Becker perfectly trace the lines of the machine and thus give the motorcycle an individual character. Made from an extremely stable tube-in-tube construction, some of the new models have an integrated crash pad.Various surface finishes are available depending on the vehicle model. protects against crashes and falls helpful when lashing the motorcycle high-quality metal coating solid construction, manufactured MADE IN GERMANY in our factory in Pirmasens comprehensive and easy-to-understand assembly instructions Scope of delivery: right + left incl. mounting material and instructions please refer to the stored installation instructions or the vehicle-specific information for any restrictions or instructions that may apply no ABE or registration is required
Front protection bar black for Honda CB 125 R (25-) Hepco & Becker
good protection in the event of overturns and falls at low speeds Indicators, clutch and brake levers, exhaust silencers, fairing parts etc. are effectively protected high-quality powder coating incl. mounting material
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Suitable for the Aprilia Tuareg 660, the crash bars are made of tubular steel with weather- and corrosion-resistant powder coating in black. The surface finish is applied in a state-of-the-art facility at the SW-MOTECH plant in Brno, Czech Republic. Crash bars from SW-MOTECH provide the necessary extra safety for the tank, fairing and components. The elements, which are manufactured specifically for the motorcycle type, fit seamlessly into the look of the vehicle while offering optimum lean angle clearance. Tailor-made mounting elements allow a resilient and simple installation at original mounting points. Construction from robust steel Weather- and corrosion-resistant powder coating in black Reliable protection of important components Extremely sturdy construction matches the appearance of the motorcycle Model-specific development guarantees precise fit and resilient frame connection Optimum lean angle clearance guaranteed Easy installation by screwing to factory frame mounting points Scope of delivery 2 x crash bars Fitting instructions Mounting material Details Material: steel Surface: powder coated Color: black Total weight: approx. 4.8 kg
Kellermann turn signal, Rhombus Dark, steel, LED, VL/HR, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus Dark Top quality Made in Germany ECE approved for front and rear More visibility for more safety Heavily tinted glass with impressive brightness M8 x 20 thread Flexible mounting Equipped with patented Kellermann HighPower LED technology Long Life Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 12 Volt vehicle electrical systems With replaceable silent rubber adapter, protects from damage a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: Rhombus DarkBulb type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, Rhombus Dark, steel, LED, VR/HL, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus Dark Top quality Made in Germany ECE approved for front and rear More visibility for more safety Heavily tinted glass with impressive brightness M8 x 20 thread Flexible mounting Equipped with patented Kellermann HighPower LED technology Long Life Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 12 Volt vehicle electrical systems With replaceable silent rubber adapter, protects from damage a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front right / rear leftExpert opinion: E-approvedTurn signal model: Rhombus DarkIlluminant type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, Rhombus Extreme, Alu, LED, VL/HR, 12 V, shiny chrome, M8x20, E-tested
Kellermann Rhombus Extreme ECE approved for front and rear Extreme light output Kellermann HighPower LED technology High quality metal housing Longlife Protection Guard®, IC controlled, 330 kHz clocked Suitable for 12 Volt DC vehicle electrical systems With M8x20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration and vandalism a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: aluminumColor: chromeComponent lighting: turn signalOptical property: glossyShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: Rhombus ExtremeBulb type: LEDVolt: 12 VThread: M8x20Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white Light
Kellermann turn signal, Rhombus Extreme, steel, LED, VL/HR, 12 V, black satin, M8x20, E-approved
Kellermann Rhombus Extreme ECE approved for front and rear Extreme light output Kellermann HighPower LED technology High quality metal housing Longlife Protection Guard®, IC controlled, 330 kHz clocked Suitable for 12 Volt DC vehicle electrical systems With M8x20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration and vandalism a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: Rhombus ExtremeBulb type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white Light
Kellermann turn signal, Rhombus Extreme, steel, LED, VR/HL, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus Extreme ECE-approved for front and rear Extreme light output Kellermann HighPower LED technology High quality metal housing Longlife Protection Guard®, IC controlled, 330 kHz clocked Suitable for 12 Volt DC vehicle electrical systems With M8x20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration and vandalism a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front right / rear leftExpert opinion: E-approvedTurn signal model: Rhombus ExtremeBulb type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white Light
Kellermann turn signal, Rhombus Extreme, steel, LED, VR/HL, 12 V, shiny chrome, M8x20, E-tested
Kellermann Rhombus Extreme ECE-approved for front and rear Extreme light output Kellermann HighPower LED technology High quality metal housing Longlife Protection Guard®, IC controlled, 330 kHz clocked Suitable for 12 Volt DC vehicle electrical systems With M8x20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration and vandalism a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: chromeComponent lighting: turn signalOptical property: glossyShape: triangularPosition: front right / rear leftExpert opinion: E-approvedTurn signal model: Rhombus ExtremeBulb type: LEDVolt: 12 VThread: M8x20Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white Light
Kellermann turn signal, Rhombus PL, steel, LED, front left, 12 V, black satin, E-tested
Kellermann Rhombus PL ECE approved for front Increased safety through improved visibility Replace the existing parking/marker light and turn signals Sensational, new front optics Clear turn signal lens Kellermann HighPower LED technology Longlife Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 6 and 12 Volt DC wiring systems With M8x20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration and vandalism a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. The existing parking light must be deactivated. Main material: steelColor: blackMaterial property: powder coatedComponent Lighting: turn signalOptical property: satinShape: triangularPosition: front leftExpert opinion: E-approvedTurn signal model: Rhombus PLBulb type: LEDVolt: 12 V Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white Light
Kellermann turn signal, Rhombus PL, steel, LED, front right, 12 V, black satin, E-tested
Kellermann Rhombus PL ECE approved for front Increased safety through improved visibility Replace the existing parking/marker light and turn signals Sensational, new front optics Clear turn signal lens Kellermann HighPower LED technology Longlife Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 6 and 12 volt DC electrical systems With M8x20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration and vandalism a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. The existing parking light must be deactivated. Main material: steelColor: blackMaterial property: powder coatedComponent Lighting: turn signalOptical property: satinShape: triangularPosition: front rightExpert opinion: E-approvedTurn signal model: Rhombus PLBulb type: LEDVolt: 12 V Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white Light
Kellermann turn signal, Rhombus S Dark, aluminum, LED, VL/HR, 12 V, black satin, M5x0,5x6,5
Kellermann Rhombus S Dark ECE approved for front and rear strongly tinted glass - spectacularly bright Kellermann HighPower LED technology High quality metal housing Longlife Protection Guard®, IC controlled, 330 kHz clocked Suitable for 12 Volt DC vehicle electrical systems With M5 x 0.5 x 6.5 mm mounting thread European protected design Main material: aluminumColor: blackComponent lighting: turn signalOptical property: satinShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: Rhombus S DarkBulb type: LEDVolt: 12 VThread: M5x0,5x6,5 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, Rhombus S Dark, aluminum, LED, VR/HL, 12 V, black satin, M5x0,5x6,5
Kellermann Rhombus S Dark ECE approved for front and rear strongly tinted glass - spectacularly bright Kellermann HighPower LED technology High quality metal housing Longlife Protection Guard®, IC controlled, 330 kHz clocked Suitable for 12 Volt DC vehicle electrical systems With M5 x 0.5 x 6.5 mm mounting thread European protected design Main material: aluminumColor: blackComponent lighting: turn signalOptical property: satinShape: triangularPosition: front right / rear leftExpert opinion: E-approvedTurn signal model: Rhombus S DarkBulb type: LEDVolt: 12 VThread: M5x0,5x6,5 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, rhombus, steel, LED, VL/HR, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus LED - Top quality Made in Germany- ECE approved for front and rear- More visibility for more safety- M8 x 20 thread- Clear glass- Flexible mounting- Equipped with patented Kellermann HighPower LED technology- Long Life Protection Guard®, IC controlled, 330 kHz clocked- High quality metal housing- Suitable for 6 and 12 volt vehicle electrical systems- With replaceable silent rubber adapter, protects against damage.May require load independent relay (133.123970) or power resistors to adjust flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: RhombusBulb type: LEDVolt: 12 VThread: M8x20Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, rhombus, steel, LED, VL/HR, 12 V, chrome matt, M8x20, E-approved
Kellermann Rhombus LED Top quality Made in Germany ECE approved for front and rear More visibility for more safety M8 x 20 thread Clear glass Flexible mounting Equipped with patented Kellermann HighPower LED technology Long Life Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 6 and 12 volt vehicle electrical systems With replaceable silent rubber adapter, protects against damage a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: chromeComponent lighting: turn signalOptical property: mattShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: RhombusBulb type: LEDVolt: 12 VThread: M8x20Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, rhombus, steel, LED, VL/HR, 12 V, shiny chrome, M8x20, E-tested
Kellermann Rhombus LED Top quality Made in Germany ECE approved for front and rear More visibility for more safety M8 x 20 thread Clear glass Flexible mounting Equipped with patented Kellermann HighPower LED technology Long Life Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 6 and 12 volt vehicle electrical systems With replaceable silent rubber adapter, protects against damage a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: chromeComponent lighting: turn signalOptical property: glossyShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: RhombusBulb type: LEDVolt: 12 VThread: M8x20Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, rhombus, steel, LED, VR/HL, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus LED - Top quality Made in Germany- ECE approved for front and rear- More visibility for more safety- M8 x 20 thread- Clear glass- Flexible mounting- Equipped with patented Kellermann HighPower LED technology- Long Life Protection Guard®, IC controlled, 330 kHz clocked- High quality metal housing- Suitable for 6 and 12 volt vehicle electrical systems- With replaceable silent rubber adapter, protects against damage.May require load independent relay (133.123970) or power resistors to adjust flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front right / rear leftExpert opinion: E-approvedTurn signal model: RhombusBulb type: LEDVolt: 12 VThread: M8x20Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, rhombus, steel, LED, VR/HL, 12 V, shiny chrome, M8x20, E-approved
Kellermann Rhombus LED Top quality Made in Germany ECE approved for front and rear More visibility for more safety M8 x 20 thread Clear glass Flexible mounting Equipped with patented Kellermann HighPower LED technology Long Life Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 6 and 12 volt vehicle electrical systems With replaceable silent rubber adapter, protects against damage a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: chromeComponent lighting: turn signalOptical property: glossyShape: triangularPosition: front right / rear leftExpert opinion: E-testedTurn signal model: RhombusBulb type: LEDVolt: 12 VThread: M8x20Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kurzer Kennzeichenhalter inkl. Kennzeichenbeleuchtung für Honda CB 125 R (18-)
Der HIGHSIDER Kennzeichenhalter AKRON-RS passt sich durch sein Design optimal an die Linienführung Deines Bikes an.Die modellbezogene Halterung des AKRON-RS ermöglicht die Montage an den originalen Befestigungspunkte Deines Bikes und somit einen Austausch ohne weiteres bohren oder schneiden.Um Beschädigung von Kabeln zu vermeiden, sind alle scharfkantigen Durchführungen durch eine Gummi-Membrantülle geschützt.Die Kennzeichenplatte ist aus Stahlblech und 2 mm stark. Der präzise Zuschnitt erfolgt per Laser. Nach dem Kanten folgt noch die witterungsbeständige, schwarze Pulverbeschichtung.Damit sind die optimale Passform und Langlebigkeit gesichert.Durch die stufenlose Verstellmöglichkeit kannst Du die Platte ohne bohren in die gewünschte Position bringen. Um die Platte in dieser Position zu halten, gibt es eine zusätzliche Sicherungsschraube.Die Blinkerhalterungen des AKRON-RS sind in der Breite verstellbar und damit für jede Art von Zubehör-Blinkern geeignet. Durch diese Verstellmöglichkeit kannst Du die Position für Deine Blinker den unterschiedlichsten Kennzeichen anpassen. Um die Montage der Blinker ohne Trennung vom Kabelbaum zu ermöglichen, sind die 10 mm Bohrungen zur Seite hin geschlitzt.Auch die Position des Rückstrahlers kannst Du über einen Schieber individuell einstellen. Eine Anpassung an die unterschiedlichen Ausführungen der EU-Kennzeichen ist somit kein Problem.Um das Kennzeichen sicher zu verschrauben und Vibrationen zu reduzieren sind im Lieferumfang zwei Gummischeiben enthalten. Ein weiterer Gummi-Puffer stützt das Kennzeichen an seiner Unterseite.Details:• modellbezogene Halterung• stufenlos verstellbare Blinkerhalter• geschlitzte Blinkeraufnahme für einfache Montage ohne Kabeltrennung• stufenlos verstellbarer Reflektor, E-Geprüft• passend für europäische Nummernschilder• stufenlos verstellbarer Neigungswinkel• zusätzliche Schraube für optimalen Positionssicherheit• einfache Fixierung ohne weitere Arbeitsschritte (z.B. Bohren)• einfache Montage des Kennzeichens durch LanglöcherZum Lieferumfang des AKRON-RS gehören:• Modellbezogene Halterung mit Montageteilen• AKRON-RS Kennzeichenhalteplatte• Verstellbare Blinker-Halterungen• E-Geprüfter Rückstrahler mit einstellbarem Halter• MontageanleitungHinweise:• Für die Originalblinker steht optional im Reiter Zubehör ein spezieller Blinkerhalter zur Verfügung.• Sollten an Deinem Original-Kennzeichenhalter seitliche Reflektoren montiert sein, müssen diese an geeigneter Position wieder angebracht oder durch neue ersetzt werden.Tipps:Solltest du keinen modellspezifischen Kennzeichenhalter für Dein Fahrzeug gefunden haben, sind die Universal-Kennzeichenhalter von HIGHSIDER, die es in vielen verschiedenen Ausführungen gibt, sicher eine gute Alternative.
LeoVince complete system LV One Evo for Honda CB 125 R Neo Sports Cafe, black, E-approval
The new LV ONE EVO BLACK EDITION STAINLESS STEEL is the synthesis between tradition and modernity. It offers visually the classic look of LeoVince mufflers, but with the highest performance and lightest materials of today. The body of the LV ONE EVO BLACK EDITION INOX is made entirely of Tig welded AISI 304 stainless steel. The accentuated streamlined design emphasizes the sporty touch and makes the silencer more resistant to external agents. Leovince has chosen full carbon for the end cap, characteristic of the LV ONE EVO BLACK EDITION stainless steel; resistant to high temperatures and asymmetrically cut. It combines the performance and lightness of carbon fiber without giving up the "Made in Italy" style. This kit comes with all the components necessary for installation on the vehicle, which are listed in the technical drawing and in the instruction manual. No additional parts are required. Details: Weight: 4.13 kg AISI 304 stainless steel Specially shaped end cap made of full carbon fiber Special black ceramic based coating Matt finish High-temperature resistant sound insulation material inside (up to 900 °C) Full carbon retaining clip laser etched LeoVince logo TIG welds Fits following Honda models: ModelChassis numberYear of manufacture CB 125 R Neo Sports Cafe ABS 4T AC JC91 2021 Approval: ECE/EU-Approved. The exhaust system is approved according to the ECE-R92 noise directive and the EU directive 134/2014 regarding pollutant emissions.
LeoVince complete system LV One Evo for Honda CB 125 R Neo Sports Cafe, carbon, E-approval
The new LeoVince LV ONE EVO CARBON is the perfect synthesis between tradition and modernity. It visually combines the classic style of LeoVince mufflers with the most powerful and lightweight materials of today. The incredibly low weight of the carbon shell of the LV ONE EVO CARBON guarantees the highest possible performance optimization. The angular lines give the design an exclusive compactness. The end cap is also made entirely of carbon. This makes the complete exhaust resistant to high temperatures. At the same time, the asymmetrical lines emphasize the exclusivity of the muffler. This kit comes with all the components necessary for installation on the vehicle, which are listed in the technical drawing and in the instruction manual. No additional parts are required. Details: Weight: 3.74 kg (-0.26 kg of the original exhaust system) Full carbon shell Two layers of pre-impregnated carbon fibers Matt finish High temperature resistant sound insulation material (900 °C) Sliding clamp made of full carbon TIG welds Fits following Honda models: ModelChassis numberYear of manufacture CB 125 R Neo Sports Cafe ABS 4T AC JC91 2021 Approval: ECE/EU-Approved. The exhaust system is approved according to the ECE-R92 noise directive and the EU directive 134/2014 regarding pollutant emissions.
