Touring screen MRA clear "T" for Honda CB 500 X (19-)
With the MRA touring screen and its overall length of 38cm, you are well advised in terms of wind protection. The replacement works in a snap with a few simple steps. This way, with better wind protection, you will have even more fun with this agile motorcycle. Item no.: 4025066157211 ABE: Yes Grid print: Yes Length in mm: 380 Width in mm: 350
Touring screen MRA smoke gray "T" for Honda CB 500 X (19-)
With the MRA touring screen and its overall length of 38cm, you are well advised in terms of wind protection. The replacement works in a snap with a few simple steps. So you have with better wind protection even more pleasure with this agile motorcycle. Item no: 4025066157228 ABE: Yes Grid print: Yes Length in mm: 380 Width in mm: 350
Variotouringscreen MRA smoke gray "VT" for Honda CB 500 X (16-)
With the adjustable spoiler at the highest level, the Variotouring windshield reaches a total height of 40cm. But the best part is that you can direct the wind thanks to the adjustable top spoiler, and the rear-flow spoiler takes the wind pressure off the rider while reducing turbulence. Item no: 4025066172030 ABE: Yes Grid print: Yes Length in mm: 310 (=OEM+45mm) Width in mm: 295
Variotouringscreen MRA clear "VT" for Honda CB 500 X (16-)
With the adjustable spoiler at the highest level, the Variotouring windshield reaches a total height of 40cm. But the best part is that you can direct the wind thanks to the adjustable top spoiler, and the rear-flow spoiler takes the wind pressure off the rider while reducing turbulence. Item No.: 4025066157242 ABE: Yes Grid print: Yes Length in mm: 310 (=OEM+45mm) Width in mm: 295
SW-Motech Engine guard black for Honda CB 500 X (18-) / NX 500 (24-) SW Motech
Additional protection for the engine against stone chipping and ground contact: The engine guard made of high-quality aluminum alloy shows its full potential off the road, but also gives road motorcycles added safety and an individual look. State-of-the-art manufacturing processes give the model-specific protective parts a secure fit. The attachment to frame mounting points provides additional stability and allows easy installation. Underbody protection against stone chips and collisions Sturdy and simple installation on original mounting points, no modifications to the motorcycle required Model-specific development for optimum fit Mounting material included in the scope of delivery Robust design made from high-quality aluminum alloy Scope of delivery 1 x engine guard Fitting instructions Mounting material Mounting details Material: aluminum Color: black Total weight: approx. 3.4 kg Not compatible with GIVI crash bars!
Side stand plate for Honda CB 500 X (19-23) Hepco & Becker
Especially when fully loaded or on unpaved surfaces, the motorcycle can easily sink and tip over on the side stand. To free your motorcycle from this danger, we recommend a model-specific, form-milled side stand plate from Hepco & Becker. By enlarging the side stand support to approximately double the surface area compared to the original stand, your motorcycle is perfectly protected against mishaps when parking. Details: Material: Aluminum & powder-coated steel Secure stand for the machine on all surfaces Effective protection when parking Quick and easy installation with just a few screws Does not require ABE or registration Color: black / silver Weight: 0.2 kg
Tank bag 3 liters for Honda CB 500X / CRF1000L Africa Twin (Bj.16-19) Original Honda
With a capacity of 3 liters, the tank bag offers enough space for your most important utensils, such as wallet, cell phone, keys and sunglasses. Thanks to the original Honda design, it is not only a real eye-catcher, but also extremely practical. Thanks to the lightweight material and the simple attachment, the tank bag is very easy to attach and remove. In addition, it is water-repellent and protects your valuables from rain and dirt.
SW-Motech Side stand foot widening for Honda CB 500 X (18-) SW Motech
The generous contact surface of the robust foot extension provides a secure footing even on uneven ground and soft surfaces. Accurate fit and easy handling in everyday riding were equally in focus during product development. The profiled top of the foot extension makes it easier to unfold the stand - even with heavy boots. Best fit and secure hold guaranteed: The anodized aluminum alloy side stand foot and the stainless steel attachment plate are CNC-milled. Doubling of the support surface of the side stand foot (depending on model) For a secure stand on soft or uneven surfaces Model specific development for best fit Easy mounting on the original side stand with three screws High-quality workmanship: CNC milled, made of anodized aluminum alloy and corrosion-resistant stainless steel Scope of delivery 1 x side stand foot extension Mounting instructions Mounting material Details Material: aluminum / stainless steel Surface: anodized Color: black / silver Total weight: approx. 0.2 kg
Passenger seat bag 22 liter Original Honda
A functional pillion bag that is specially adapted to the shape of the seat. The capacity can be increased from 15 to 22 liters. Simple and stable attachment is possible when installed using the mounting kit provided (available separately). A rain cover is included in the scope of delivery. Cannot be used together with the pillion seat cover. Must be combined with mounting kit (sold separately). Details: Dimensions (L x W x H in mm): 365 x 355 x 243 Rain cover included Outside pockets on both sides Maximum load: 4 kg
Top Case 35L *NH-312M* MATT CYNOS GRAY METALLIC Original Honda
With a capacity of 35 liters, this top case offers enough space for all your luggage. The lid is finished in a cool Matt Cynos Gray Metallic and gives your bike a modern look. To mount the Top Case, you need a luggage bridge and a mounting plate. The key of the Top Case is different from the ignition key, which provides additional security. Both the key and the mounting accessories are sold separately. This top case comes directly from Honda and is therefore an original product. So you can count on high quality and a long life.
Carrier for side case & attachment for top case for Honda CB 500 X (19-) Original
The carrier for side cases & attachment for top case is specially designed for the Honda CB 500 X (19-) Original and offers you the perfect solution for your luggage problem. With this mounting system you can install and secure your side cases and top case in just a few minutes. The luggage system is sold separately and can be easily attached to the mounting system. So you have enough space for all your travel essentials and can fully concentrate on your ride. The carrier for side cases & attachment for top case for Honda CB 500 X (19-) Original is made of high-quality material and offers you a stable and secure mounting option for your luggage. The mounting system is lightweight and robust at the same time and fits perfectly to your motorcycle.
Retaining plate for Top Case 35L for Honda CB 500 X / CBR 500 R (19-) Original
This mounting plate is specifically designed for the Honda CB 500 X and CBR 500 R (19-) and is not compatible with side cases. The retaining plate is made of sturdy material and keeps your top case securely in place, even at high speeds and uneven terrain. Mounting the retaining plate is simple and straightforward. The mounting plate is attached to the specified mounting points of your motorcycle and the top case is then attached to the mounting plate. So you have your luggage always safe and protected.
Luggage bridge for Top Case 35L for Honda CB 500 X (19-) Original
The luggage bridge for Top Case 35L for Honda CB 500 X (19-) Original is the ideal accessory for anyone who likes to travel on his motorcycle. The robust design guarantees high load capacity and stability, while the integrated grab handles for the pillion rider allow a comfortable and safe ride. The luggage bridge is specifically designed for mounting the Top Case 35L (sold separately) and offers a perfect fit for your motorcycle. However, it is not compatible with the carrier system for side cases. The luggage bridge for Top Case 35L is made of high quality materials and impresses with its high quality workmanship. It is easy to install and offers a perfect addition to your motorcycle when you want to go on trips. With the luggage rack for Top Case 35L for Honda CB 500 X (19-) Original you have the possibility to customize your motorcycle and adapt it to your needs. It is an indispensable accessory for anyone who loves to travel and wants to equip his Honda CB 500 X optimally. Trust the high quality and reliability of Honda Genuine accessories and experience unforgettable adventures on your motorcycle.
Inner bag for Top Case 35 liters original Honda
The inner bag for the Top Case 35 liter original Honda offers you not only enough space for all your equipment, but is also super practical and stylish at the same time. With adjustable straps and expandable volume, it is the perfect companion for your next tour. The black nylon processing of the inner bag ensures a robust and durable quality. The adjustable straps allow you to carry the bag comfortably on your back and thus have your hands free. With a capacity of 15 liters, it offers enough space for your most important utensils. However, if you need more space, you can easily expand the volume from 15 to 25 liters. The Honda Wing logo in silver on the A4 front pocket gives the bag a cool look and shows your attachment to the brand. The inner bag for the Top Case 35 liter original Honda is an official Honda product and therefore of the highest quality and fit. You can be sure that your equipment is safely stowed away and will not be damaged even on longer rides. We are sure that you have found the perfect companion for your next tour with our inner pannier. - black nylon "standard", adjustable carrying straps- expandable volume from 15 to 25 liters- DIN A4 front pocket with Honda Wing logo in silver
Radiator guard for Honda CB 500 X (16-) Givi
Specific protection for stainless steel water and oil radiators, black Important note:GIVI products are designed for vehicles in original condition. Compatibility with accessories from other manufacturers such as exhaust systems, etc. can not be guaranteed
Windshield tinted for Honda CB 500 X 2019- Original
The windshield tinted for the Honda CB 500 X 2019- Original is the perfect upgrade for your bike. The size and shape of the windshield are identical to the standard equipment, but it brings many advantages. The tinted look not only makes your bike more stylish and cool, but also makes your riding experience more enjoyable. The windshield protects you from wind and weather and allows you to enjoy a pleasant ride even at higher speeds. The windshield is made of high-quality material and is a perfect fit for the Honda CB 500 X 2019- Original. The installation is very easy and can be done by anyone. With the windshield tinted for the Honda CB 500 X 2019- Original you will be the eye-catcher on the road and can enjoy your bike to the fullest.
Case carrier system for Honda CB 500 X (19-) Original
The pannier rack system for Honda CB 500 X (19-) Original has been specially developed for your motorcycle and guarantees an easy installation of the original Honda side cases. The system is made of high quality material and is particularly robust and stable. So you can be sure that your cases are securely attached to the motorcycle even during fast rides. The pannier rack system for Honda CB 500 X (19-) Original is not only practical, but also looks really cool. It fits perfectly with the design of your motorcycle and gives it that extra bit of style.
Side case set for Honda CB 500 X (19-) Original
The side case set consists of two aerodynamically shaped cases that fit perfectly into the design of your motorcycle. With a capacity of 29 liters, the cases offer enough space for your most important utensils on longer tours. But best of all, you don't have to worry about fitting them. Simply combine the set with the matching pannier rack system (08L74-MKP-J80ZA) and the locking cylinder for the side case set (08M70-MJW-J81) and you're ready to go. The side case set for the Honda CB 500 X (19-) is an original product and impresses not only with its functionality, but also with its casual design.
Crash bar for Honda CB 500 X 2019- Original
The original crash bar from Honda is perfectly matched to your machine and provides increased protection for your motorcycle in the event of a fall. The crash bar also allows you to mount fog lights (sold separately) to be safe on the road even in poor visibility. But that's not all: The crash bar also emphasizes the adventure look of your machine. With this cool accessory, you turn your CB 500 X into a real adventure bike and attract all eyes on you. The original Honda crash bar for the CB 500 X 2019 is made of high-quality material and perfectly underlines the adventure look of your machine.
Main stand for CB 500 X 2019- Original Honda
The original Honda main stand is the perfect solution for safe parking on different surfaces and also facilitates cleaning or maintenance work on your bike. The main stand is made of high-quality material and fits perfectly to your 2019 CB 500 X. With it, you can park your bike safely at any time and no longer have to worry about it tipping over or falling down. Even on uneven ground or in gusts of wind, your bike is always stable and secure. But that's not all: The main stand also makes it easier for you to clean and maintain your bike. You can easily jack it up and have a clear view of all components. This not only makes your work easier, but also ensures that you can always keep your bike in top condition. The original Honda main stand is therefore an absolute must-have for every CB 500 X 2019 owner. With it, you're always on the safe side and can park your bike safely and conveniently at all times. Info:With the article can appear at the welds small brown spots (see last photo) These are harmless and barely visible. It is not rust here.
Hand protectors for Honda CB 500 X 2022-
The original Honda hand protectors are made to fit the Honda CB 500 X 2022- and offer excellent protection against wind and rain. So you can go on tour even in bad weather without worry. The protectors are made of high-quality material and thus withstand even the harshest conditions. They are particularly lightweight and do not interfere with driving. But not only the protection is in the foreground, the design is also important to us. The original Honda hand protectors give your Honda CB 500 X 2022- the ultimate adventure look and make your bike a real eye-catcher. The hand protectors are easy to install and fit your Honda CB 500 X 2022- perfectly. They are particularly durable and withstand even the toughest conditions. We are convinced of the quality of Honda original products.
12V socket for Honda CB 500 X 2019- Original
With the 12V socket for Honda CB 500 X 2019- Original Honda you can supply your mobile companions such as navi or cell phone directly on the motorcycle with power and thus always keep up to date. The installation of the socket is very easy and can be done by anyone. The high-quality workmanship and original Honda accessories guarantee a long service life and a reliable power supply. Whether you want to charge your smartphone, navigation device or other electronic devices - with the 12V socket you always have enough power with you. The socket is specially designed for the 2019 Honda CB 500 X and fits perfectly into the design of your bike. In addition, the weather-resistant finish ensures that you do not have to do without your power supply even in rain and bad weather conditions.
ARROW exhaust DARK PRO-RACE for Honda CB 500 X (19-)
ARROW DARK PRO RACE rear muffler with black stainless steel shell in megaphone shape, with dB-Killer insert, street legal.For Honda CB500X, type PC64, model year 2019-Mounts to original manifold or ARROW Racing manifold AR-71710MI. MotoGP set a new trend with exhaust systems in conical shape. The great demand for similar exhaust systems in hobby racing led Arrow to develop the Pro-Race series. The muffler combines a conical section with a cylindrical end piece and has a permanently welded bracket. The conical shape promises a significant reduction in dimensions as well as weight and also reduces the overall volume of the muffler, compared to stock systems. As with all Arrow exhaust systems, the elaborate TIG welding process is used - the result is a first-class power delivery and a visually appealing exhaust.
ARROW RACE TECH exhaust for Honda CB500X 2017- made from carbon fiber
ARROW RACE-TECH rear silencer with carbon sleeve and carbon end cap, with dB-killer, with road approval.For HondaCB500X, type PC59, model year 2017-18CB500X, type PC64, model year 2019-Can only be used in conjunction with ARROW intermediate pipe. RACE-TECH rear silencers were the first exhaust systems with a diamond or lozenge shape and have replaced Arrow's elliptical shape over the years. The new shape made it possible to significantly reduce the dimensions compared to the previous exhaust systems and still keep the cross-section the same. This results in an enormous weight saving without having to compromise on volume. The result is a crisp sound and top performance. The rear silencer is artfully finished using the TIG welding process. Features:- Crisp sound and top performance- Diamond shape: significantly reduces the size of the oval exhaust while maintaining the same volume
