Tank mount for tank bags for Honda CBR1000RR (Bj.17-18) / CB 650F (Bj.17-18) / CB 650 R (21
for Honda CBR1000RR (Bj.17-18) / CB 650F (Bj.17-18) / CB 650 R (21-)specific mounting ring for TANKLOCK / TanklockED bags.Important note: The tank ring is supplied without accessories (tank bag, ...)!
Shad 3P System side pannier rack, black painted, for Honda CB 650 R Neo Sports Cafe / CBR 650 R (21–23)
The 3P side mounting system was developed specifically for the SH23, SH35 and SH36 side cases. During the development phase, the focus was on safety above all else, alongside aesthetic considerations. Integrated design: The 3P mounting system adapts perfectly to the contours of the vehicle. The typical right-angled frame has been reduced to a single arm that supports the three points (3P) required to secure the panniers. Position: Both the volume of the pannier and the angle of the 3P system have been designed to shift the weight of the luggage as close as possible to the centre of the motorbike. This ensures greater safety and stability when riding with a full load. Aerodynamics: The use of three mounting points provides both stability and flexibility. This is achieved through a slight oscillation of the pannier. This allows air to circulate freely around the pannier, thereby avoiding the so-called ‘angle effect’ typical of a flat, rigid pannier. Here too, this results in improved safety and stability whilst riding. Patent pending: The uniqueness and technical innovation of the 3P system have enabled SHAD to patent it. This makes SHAD the sole manufacturer able to offer this mounting system. Main material: Steel Note: Not compatible with TR40, TR30, SH23, TR27, SH38X, TR36 and TR47
Radiator guard for Honda CB 650 R (21-) Givi
Specific protection for stainless steel water and oil radiators, black Important note:GIVI products are designed for vehicles in original condition. Compatibility with accessories from other manufacturers such as exhaust systems, etc. can not be guaranteed
Spacer Givi saddlebags for Honda CB 650 R (21-)
Specific spacers for EASYLOCK saddlebags / only mountable with 1185KIT (not included) Important note:GIVI products are designed for vehicles in original condition. Compatibility with accessories from other manufacturers such as exhaust systems, etc. can not be guaranteed
LSL brake lever BOW R14 silver, short for Honda
LSL lever BOWThe lever is characterized by a previously unattained, lightweight design, which is characterized by large cutouts between the mounting points and the transition to the lever surface. This possibility was created by a newly developed design of the adjustment lock. The adjustment is cleverly carried out by means of a plastic key supplied, which actuates the anodized adjustment star in six different stages without scratching. Thus the adjustment of the lever can be adapted to the needs of the driver completely as desired. In the long version, a slotted hole at the end of the lever in the horizontal direction prevents unintentional application of the lever at high speeds.Special features:- With ABE- Ultra-light lever design (approx. 130g)- 6-fold adjustable- A predetermined breaking point allows the long version to continue driving after a slip and ensures the continued function of the lever- Aerodynamically designed slotted hole at the end of the lever in the long version prevents the lever from being applied at high speedsColor: silver / silver Info about ABE:For this article an ABE and/or parts certificate are available. Please check if your vehicle is registered in the ABE or in the parts certificate and if additional mounting parts (e.g. clamps) are needed (see document). For some models a preliminary required manufacturer's confirmation is available. Downloads: General type approval (ABE)Mounting instructions
LSL brake lever BOW R14 black, short for Honda
LSL lever BOWThe lever is characterized by a previously unattained, lightweight design, which is characterized by large cutouts between the mounting points and the transition to the lever surface. This possibility was created by a newly developed design of the adjustment lock. The adjustment is cleverly carried out by means of a plastic key supplied, which actuates the anodized adjustment star in six different stages without scratching. Thus the adjustment of the lever can be adapted to the needs of the driver completely as desired. In the long version, a slotted hole at the end of the lever in the horizontal direction prevents unintentional application of the lever at high speeds.Special features:- With ABE- Ultra-light lever design (approx. 130g)- 6-fold adjustable- A predetermined breaking point allows the long version to continue driving after a slip and ensures the continued function of the lever- Aerodynamically designed slotted hole at the end of the lever in the long version prevents the application of the lever at high speedsColor: black / black Info about ABE:For this article an ABE and/or parts certificate are available. Please check if your vehicle is registered in the ABE or in the parts certificate and if additional mounting parts (e.g. clamps) are needed (see document). For some models a preliminary required manufacturer's confirmation is available. Downloads: General type approval (ABE)Mounting instructions
SW-Motech ION S Motorcycle Tail Bag Honda CB 650 R (18-)
Ideal for small and sporty bikes: The volume of the ION S rear bag can be expanded via a zipper from 7 to 15 l and thus offers enough storage space for drink, change of clothes, high-visibility vest and other small items that you need on a day trip or short trip. The compact bag can be lashed to riveted D-rings with included loop straps. In addition, two Velcro tabs and a slot on the bottom allow for quick and secure attachment to the seat or luggage rack. The stiffened sides, the padded lid and straps to tighten the volume expansion guarantee a firm shape even with sporty driving. Particularly quickly at hand are things that are stowed in the outer pocket or in the mesh compartment inside the lid. A carrying handle makes the ION tail bag a practical travel companion even off the road. Rear bags of the ION series - available as S, M and L variantsThree sizes, elegant looks, attractive price: the ION series tail bags are available in three shapes and can be lashed to almost any motorcycle tail. Made of black 600D polyester with elements of soft vinyl, the tail bags combine an attractive design with features suitable for touring, such as optimized storage space, non-slip underside, lockable main compartment zipper and a waterproof inner pocket. The reflective textile piping is hardly noticeable in daylight, but increases visibility many times over in the dark. Compact rear bag, ideal for small and sporty bikes Volume expansion from 7 to 15 l, height varies between 10 and 18 cm D-rings for reliable 4-point attachment with loop straps Two integrated Velcro straps plus insert for fastening under the seat or luggage rack Easy access: outer pocket and mesh pocket inside the lid Large main compartment for individual loading Practical carrying handle Anti-slip underside for best grip Attractive look thanks to the combination of polyester textile fabric with black soft vinyl Reflective details for more safety in road traffic Discreet design elements: embroidered SW-MOTECH logo and bull in silver gray Durable, especially UV-resistant 600D polyester with water-repellent inner coating Waterproof inner bag included Scope of delivery 1 x ION S tail bag 1 x waterproof inner bag 1 x strap set for tail bag (20 mm wide, 2x 37 cm long, 2x 70 cm long) 1 x paint protection film Details Material: 600D Polyester / Soft-Vinyl Color: black / black Dimensions: 33,0 x 29,0 x 10,0 cm Total weight: approx. 0,6 kg Total volume: 7,0-15,0 l
Tankpad / tank protector with Honda CB logo
The tank pad designed by Honda specifically for this model protects the paint of your tank from unsightly scratches and other damage. The design is brand new and was designed specifically for the Neo Sport Café Bike. It is modern, stylish and fits perfectly to your bike. The tankpad features the Honda CB logo, which gives it an extra dose of coolness. The tank pad is easy to install and holds bombproof. It will give you long pleasure and protect your motorcycle from unsightly scratches. The material is robust and durable, so you will have long pleasure in your new tank pad.
SW-Motech ION M Motorcycle Tail Bag Honda CB 650 R (18-)
The ION M tail bag can be fixed on almost any motorcycle rear thanks to optimized fit and the curved and anti-slip bottom. Particularly practical: the tail bag has two external pockets and a mesh compartment inside the lid. The storage space of 26 l, easily accessible via the large lid, can be enlarged to 36 l by two side extensions if required. The stiffened sides prevent the bag from flapping - even during sporty riding. An integrated carrying handle and the included shoulder strap also make the ION M rear bag a comfortable travel bag. Rear bags of the ION series - available as S, M and L variantsThree sizes, elegant look, attractive price: The rear bags of the ION series are available in three shapes and can be lashed to almost any motorcycle rear. Made of black 600D polyester with elements of soft vinyl, the tail bags combine an attractive design with features suitable for touring, such as optimized storage space, non-slip underside, lockable main compartment zipper and a waterproof inner pocket. The reflective textile piping is barely noticeable in daylight, but increases visibility many times over in the dark. Optimized for pillion seat or vehicle rear of many models Volume expansion from 26 to 36 l via two side zippers, width varies from 44 to 54 cm 4 D-rings to fix the shoulder belt or other luggage No flapping thanks to stiffened sides Easy access: 2 outside pockets and mesh pocket inside the lid Large main compartment for individual loading Practical carrying handle Anti-slip underside for best grip Attractive look due to the combination of polyester textile fabric with black soft vinyl Reflective details for more safety in road traffic Discreet design elements: embroidered SW-MOTECH logo and bull in silver gray Durable, especially UV-resistant 600D polyester with water-repellent inner coating Waterproof inner bag included Scope of delivery 1 x ION M tail bag 1 x waterproof inner bag 4 x loop straps long (67 cm) 4 x loop straps short (17 cm) 2 x straps to attach to license plate holder 1 x shoulder strap 1 x paint protection foil Details Material: 600D Polyester / Soft-Vinyl Color: black / black Dimensions: 30,0 x 44,0 x 30,0 cm Total weight: approx. 1,5 kg Total volume: 26,0-36,0 l
SW-Motech PRO Roadpack tail bag Honda CB 650 R (18-20), RH02
The PRO Roadpack is a compact bag that fits perfectly on the rear of small and sporty motorcycles. The volume of the small tail bag can be expanded from 8 to 14 liters via a zipper. An inside pocket with zipper in the lid offers storage space for keys, wallet and other small things. In addition to the loop straps supplied, two Velcro straps and a slot on the underside enable quick and secure attachment to the bench or luggage rack . The stiffened sides, the molded cover made of EVA material and straps for tightening the volume increase guarantee a firm shape even with a sporty driving style. The tail bag from the PRO series is made of indestructible 1680 D ballistic nylon, which was originally designed for military purposes. In addition, it impresses with high-quality workmanship and well thought-out features: reflective attachments ensure better visibility, robust lashing hooks secure the bags quickly and easily at the rear and a MOLLE attachment on the top enables additional bags to be attached. The patented lashing hooks allow flexible attachment of the PRO tail bags. The straps are hooked in and tensioned in one step. To remove the bag, the strap is relaxed with a handle and removed from the lashing eyelet by pulling on the drawstring. The excess length of the belt can be secured with a Velcro fastener on the belt. The bag can be used on different motorcycles and the strap length can be adjusted accordingly. < br /> Universal fit for almost all motorcycles Top of the bag made of laminated and dimensionally stable EVA material Zippered mesh compartment in the lid Volume expansion in the base area from 8 to 14 liters Underside made of non-slip material Robust lashing eyes for secure fastening of the bag at 4 points and for lashing additional bags Made of tough and particularly UV-resistant 1680D ballistic nylon with a water-repellent inner coating Reflective details for better visibility Zipper management: rubber loops prevent the zipper from fluttering MOLLE attachment made of sturdy Hypalon material on the top for attaching additional pockets. Easy and quick attachment of the bag to the motorcycle using loop straps with patented lashing hooks. Weather protection through included waterproof inner pocket Sturdy handle Scope of delivery 1 x PRO Roadpack rear bag 1 x waterproof inner pocket 4 x loop straps with lashing hooks 1 x paint protection film Installation instructions Details Material: 1680D Ballistic Nylon Color: black / anthracite Dimensions: 36.0 x 28.0 x 15.0 cm Total weight: 0.9 kg Total volume: 8.0-14.0 l
SW-Motech PRO Rackpack tail bag Honda CB 650 R (18-20), RH02
The robust PRO Rackpack was developed specifically for use on luggage racks and, in combination with the shoulder strap, is a practical travel bag. In conjunction with the luggage rack extension, it can be easily attached to the STREET-RACK or the ADVENTURE-RACK as well as to standard racks, pillion seats or a sissy bar. The extensions on both sides of the tail bag allow the volume to be expanded from 32 to 42 liters. Smaller luggage can be safely stowed in the two outside pockets with internal mesh compartments. The underbody is equipped with non-slip material and the top of the PRO Rearbag tail bag provides additional pockets with a secure hold on the sewn-on MOLLE attachment. The tail bag from the PRO series is made of indestructible 1680 D ballistic nylon, which was originally designed for military purposes. In addition, it impresses with high-quality workmanship and well thought-out features: reflective attachments ensure better visibility, robust lashing hooks secure the bags quickly and easily at the rear and a MOLLE attachment on the top enables additional bags to be attached. The patented lashing hooks allow flexible attachment of the PRO tail bags. The straps are hooked in and tensioned in one step. To remove the bag, the strap is relaxed with a handle and removed from the lashing eyelet by pulling on the drawstring. The excess length of the belt can be secured with a Velcro fastener on the belt. The bag can be used on different motorcycles and the strap length can be adjusted accordingly. Universal fit for almost all motorcycles Large mesh compartment with zipper on the inside of the lid Additional storage space thanks to two outside pockets with covered zippers Inside mesh compartments with zippers in both outside pockets Volume extensions on both outer sides Underside made of non-slip material Robust lashing eyes for secure fastening of the bag at 4 points and for lashing additional bags Made of tough and particularly UV-resistant 1680D ballistic nylon with a water-repellent inner coating Reflective details for better visibility Zipper management: rubber loops prevent the zipper from fluttering MOLLE attachment made of sturdy Hypalon material on the top for attaching additional bags. Easy and quick attachment of the bag to the motorcycle using loop straps with patented lashing hooks. Weather protection through included waterproof inner pocket Stable handle Scope of delivery 1 x PRO Rackpack tail bag 1 x waterproof inner pocket 4 x loop straps with lashing hooks 1 x shoulder strap 1 x paint protection film Installation instructions Details Material: 1680D Ballistic Nylon Color: black / anthracite Dimensions: 33.0 x 56.0 x 26.0 cm Total weight: 2.4 kg Total volume: 32.0-42.0 l
SW-Motech PRO Rackpack tail bag Honda CB 650 R (18-20), RH08
The robust PRO Rackpack was specifically developed for use on luggage racks and, in combination with the shoulder strap, is a practical travel bag. In conjunction with the luggage rack extension, it can be easily attached to the STREET-RACK or the ADVENTURE-RACK as well as to standard racks, pillion seats or a sissy bar. The extensions on both sides of the tail bag allow the volume to be expanded from 32 to 42 liters. Smaller luggage can be safely stowed in the two outside pockets with internal mesh compartments. The underbody is equipped with non-slip material and the top of the PRO Rearbag tail bag provides additional pockets with a secure hold on the sewn-on MOLLE attachment. The tail bag from the PRO series is made of indestructible 1680 D ballistic nylon, which was originally designed for military purposes. In addition, it impresses with high-quality workmanship and well thought-out features: reflective attachments ensure better visibility, robust lashing hooks secure the bags quickly and easily at the rear and a MOLLE attachment on the top enables additional bags to be attached. The patented lashing hooks allow flexible attachment of the PRO tail bags. The straps are hooked in and tensioned in one step. To remove the bag, the strap is relaxed with a handle and removed from the lashing eyelet by pulling on the drawstring. The excess length of the belt can be secured with a Velcro fastener on the belt. The bag can be used on different motorcycles and the strap length can be adjusted accordingly. Universal fit for almost all motorcycles Large mesh compartment with zipper on the inside of the lid Additional storage space thanks to two outside pockets with covered zippers Inside mesh compartments with zippers in both outside pockets Volume extensions on both outer sides Underside made of non-slip material Robust lashing eyes for secure fastening of the bag at 4 points and for lashing additional bags Made of tough and particularly UV-resistant 1680D ballistic nylon with a water-repellent inner coating Reflective details for better visibility Zipper management: rubber loops prevent the zipper from fluttering MOLLE attachment made of sturdy Hypalon material on the top for attaching additional pockets. Easy and quick attachment of the bag to the motorcycle using loop straps with patented lashing hooks. Weather protection through included waterproof inner pocket Sturdy handle Scope of delivery 1 x PRO Rackpack tail bag 1 x waterproof inner pocket 4 x loop straps with lashing hooks 1 x shoulder strap 1 x paint protection film Installation instructions Details Material: 1680D Ballistic Nylon Color: black / anthracite Dimensions: 33.0 x 56.0 x 26.0 cm Total weight: 2.4 kg Total volume: 32.0-42.0 l
SW-Motech PRO Rearbag rear bag Honda CB 650 R (18-), RH02
With its universal fit, the PRO Rearbag is suitable for use on road bikes as well as for the pillion seat of a touring enduro. With a volume of 22 liters, which can be expanded up to 34 liters, the bag offers enough space for luggage on the pillion seat of your motorcycle.You can even stow your helmet in the rear bag. The slightly curved bottom adapts to the seat and is equipped with anti-slip material. The top of the PRO Rearbag rear bag made of dimensionally stable and laminated EVA material gives additional bags a secure hold on the sewn-on MOLLE attachment. The rear bag from the PRO series is made of indestructible 1680 D Ballistic Nylon, which was originally designed for military purposes. In addition, it convinces with high-quality workmanship and sophisticated features: Reflective attachments provide better visibility, robust lashing hooks secure the bags easily and quickly at the rear and a MOLLE attachment on the top allows the attachment of additional pockets.The patented lashing hooks allow flexible attachment of the PRO tail bags. The hooking and tensioning of the straps is done in one step. To remove the bag, the strap is slackened with a flick of the wrist and removed from the lashing eye by pulling on the tie-down strap. The excess strap length can be secured to the strap with Velcro. This allows the bag to be used on different motorcycles and the strap length can be adjusted accordingly. Universal fit for almost all motorcycles Top of the bag made of laminated and dimensionally stable EVA material Zippered mesh compartment in the lid Additional storage space through two outer pockets with covered zippers Volume expansion in the lid area from 22 to 34 liters Storage space for a helmet Underside made of anti-slip material Robust lashing eyes for secure fastening of the bag at 4 points and for lashing additional bags Made of durable and extra UV-resistant 1680D Ballistic Nylon with water-repellent inner coating Reflective details for better visibility Zipper management: rubber loops prevent zippers from fluttering MOLLE attachment made of sturdy Hypalon material on the top for attaching additional pouches. Easy and quick attachment of the bag to the motorcycle by loop straps with patented lashing hook. Weather protection through included waterproof inner bag Sturdy carrying handle Scope of delivery 1 x PRO Rearbag rear bag 1 x waterproof inner bag 4 x loop straps with lashing hooks 2 x lashing eyes for attachment to license plate holder 1 x paint protection film Mounting instructions Details Material: 1680D Ballistic Nylon Color: black / anthracite Dimensions: 40,0 x 43,0 x 25,0 cm Total weight: 1 ,8 kg Total volume: 22,0-34,0 l
SW-Motech PRO Rearbag tail bag Honda CB 650 R (18-20), RH08
p > With its universal fit, the PRO rearbag is just as suitable for use on road bikes as it is for the pillion seat of a travel enduro. With a volume of 22 liters, which can be expanded to 34 liters, the bag offers enough space for luggage on the pillion seat of your motorcycle. You can even stow your helmet in the rear bag. The slightly curved underbody adapts to the seat and is equipped with non-slip material. The top of the PRO Rearbag tail bag made of dimensionally stable and laminated EVA material provides additional pockets with a secure hold on the sewn-on MOLLE attachment. The tail bag from the PRO series is made of indestructible 1680 D ballistic nylon, which was originally designed for military purposes. In addition, it convinces with high-quality workmanship and well thought-out features: reflective attachments ensure better visibility, robust lashing hooks secure the bags quickly and easily at the rear and a MOLLE attachment on the top enables additional bags to be attached. The patented lashing hooks allow flexible attachment of the PRO tail bags. The straps are hooked in and tensioned in one step. To remove the bag, the strap is relaxed with a handle and removed from the lashing eyelet by pulling on the drawstring. The excess length of the belt can be secured with a Velcro fastener on the belt. The bag can be used on different motorcycles and the strap length can be adjusted accordingly. Universal fit for almost all motorcycles Top of the bag made of laminated and dimensionally stable EVA material Zippered mesh compartment in the lid Additional storage space thanks to two outside pockets with covered zippers Volume expansion in the lid area from 22 to 34 liters Storage space for a helmet Underside made of non-slip material Robust lashing eyes for secure fastening of the bag at 4 points and for lashing additional bags Made of tough and particularly UV-resistant 1680D ballistic nylon with a water-repellent inner coating Reflective details for better visibility Zipper management: rubber loops prevent the zipper from fluttering MOLLE attachment made of sturdy Hypalon material on the top for attaching additional pockets. Easy and quick attachment of the bag to the motorcycle using loop straps with patented lashing hooks. Weather protection through included waterproof inner pocket Sturdy handle Scope of delivery 1 x PRO Rearbag tail bag 1 x waterproof inner pocket 4 x loop straps with lashing hooks 2 x lashing eyes for attachment to the license plate holder 1 x paint protection film Installation instructions Details Material: 1680D Ballistic Nylon Color: black / anthracite Dimensions: 40.0 x 43.0 x 25.0 cm Total weight: 1.8 kg Total volume: 22.0-34.0 l
SW-Motech PRO Rearbag tail bag Honda CB 650 R (18-20), RH02
p > With its universal fit, the PRO rearbag is just as suitable for use on road bikes as it is for the pillion seat of a travel enduro. With a volume of 22 liters, which can be expanded to 34 liters, the bag offers enough space for luggage on the pillion seat of your motorcycle. You can even stow your helmet in the rear bag. The slightly curved underbody adapts to the seat and is equipped with non-slip material. The top of the PRO Rearbag tail bag made of dimensionally stable and laminated EVA material provides additional pockets with a secure hold on the sewn-on MOLLE attachment. The tail bag from the PRO series is made of indestructible 1680 D ballistic nylon, which was originally designed for military purposes. In addition, it impresses with high-quality workmanship and well thought-out features: reflective attachments ensure better visibility, robust lashing hooks secure the bags quickly and easily at the rear and a MOLLE attachment on the top enables additional bags to be attached. The patented lashing hooks allow flexible attachment of the PRO tail bags. The straps are hooked in and tensioned in one step. To remove the bag, the strap is relaxed with a handle and removed from the lashing eyelet by pulling on the drawstring. The excess length of the belt can be secured with a Velcro fastener on the belt. The bag can be used on different motorcycles and the strap length can be adjusted accordingly. Universal fit for almost all motorcycles Top of the bag made of laminated and dimensionally stable EVA material Zippered mesh compartment in the lid Additional storage space thanks to two outside pockets with covered zippers Volume expansion in the lid area from 22 to 34 liters Storage space for a helmet Underside made of non-slip material Robust lashing eyes for secure fastening of the bag at 4 points and for lashing additional bags Made of tough and particularly UV-resistant 1680D ballistic nylon with a water-repellent inner coating Reflective details for better visibility Zipper management: rubber loops prevent the zipper from fluttering MOLLE attachment made of sturdy Hypalon material on the top for attaching additional pockets. Easy and quick attachment of the bag to the motorcycle using loop straps with patented lashing hooks. Weather protection through included waterproof inner pocket Sturdy handle Scope of delivery 1 x PRO Rearbag tail bag 1 x waterproof inner pocket 4 x loop straps with lashing hooks 2 x lashing eyes for attachment to the license plate holder 1 x paint protection film Installation instructions Details Material: 1680D Ballistic Nylon Color: black / anthracite Dimensions: 40.0 x 43.0 x 25.0 cm Total weight: 1.8 kg Total volume: 22.0-34.0 l
SW-Motech PRO Roadpack rear bag Honda CB 650 R (18-20), RH08
The PRO Roadpack is a compact bag that fits perfectly on the rear of small and sporty motorcycles. The volume of the small tail bag can be expanded from 8 to 14 liters via a zipper. An inside pocket with zipper in the lid offers storage space for keys, wallet and other small things. In addition to the loop straps supplied, two Velcro straps and a slot on the underside enable quick and secure attachment to the bench or luggage rack . The stiffened sides, the molded cover made of EVA material and straps for tightening the volume increase guarantee a firm shape even with a sporty driving style. The tail bag from the PRO series is made of indestructible 1680 D ballistic nylon, which was originally designed for military purposes. In addition, it impresses with high-quality workmanship and well thought-out features: reflective attachments ensure better visibility, robust lashing hooks secure the bags quickly and easily at the rear and a MOLLE attachment on the top enables additional bags to be attached. The patented lashing hooks allow flexible attachment of the PRO tail bags. The straps are hooked in and tensioned in one step. To remove the bag, the strap is relaxed with a handle and removed from the lashing eyelet by pulling on the drawstring. The excess length of the belt can be secured with a Velcro fastener on the belt. The bag can be used on different motorcycles and the strap length can be adjusted accordingly. < br /> Universal fit for almost all motorcycles Top of the bag made of laminated and dimensionally stable EVA material Zippered mesh compartment in the lid Volume expansion in the base area from 8 to 14 liters Underside made of non-slip material Robust lashing eyes for secure fastening of the bag at 4 points and for lashing additional bags Made of tough and particularly UV-resistant 1680D ballistic nylon with a water-repellent inner coating Reflective details for better visibility Zipper management: rubber loops prevent the zipper from fluttering MOLLE attachment made of sturdy Hypalon material on the top for attaching additional pockets. Easy and quick attachment of the bag to the motorcycle using loop straps with patented lashing hooks. Weather protection through included waterproof inner pocket Sturdy handle Scope of delivery 1 x PRO Roadpack rear bag 1 x waterproof inner pocket 4 x loop straps with lashing hooks 1 x paint protection film Installation instructions Details Material: 1680D Ballistic Nylon Color: black / anthracite Dimensions: 36.0 x 28.0 x 15.0 cm Total weight: 0.9 kg Total volume: 8.0-14.0 l
SW-Motech PRO Enduro belt tank bag Honda CB 650 R (18-), RH02
For some motorcycles we can not offer tank rings, but the PRO Enduro strap tank bag impresses with thoughtful details. When stopping to fill the tank, clip fasteners allow the base to be moved or folded away - clearing the way to the tank cap. The PRO Enduro strap tank bag fits like a glove on touring motorcycles with sloping tanks.PRO tank bags offer elegant and timeless design combined with durable materials and well thought-out product features: Ballistic nylon protects luggage from impact, wind and weather. The top made of laminated EVA material gives the bags a distinctive shape and, in conjunction with a MOLLE attachment, ensures a secure hold for smartphone and tablet holders. Suitable for almost any motorcycle tank, even for high-end enduros with extremely short tanks Made of robust and especially UV-resistant 1680D Ballistic Nylon with water-repellent inner coating MOLLE attachment made of sturdy Hypalon material on the top for smartphone and tablet holders Reflective details for better visibility Mesh pockets inside Weather protection with included rain cover Robust carrying handle Cable aperture on the front and back side Scope of delivery 1 x PRO Enduro strap tank bag 1 x waterproof inner bag 1 x paint protection film Details Material: 1680D Ballistic Nylon Color: black / gray Dimensions: 35,0 x 31,5 x 20,0 cm Total weight: 1,1 kg Total volume: 12.0-15.0 l
SW-Motech PRO GS tank bag Honda CB 650 R (18-), RH02
The PRO GS was developed specifically for steeply sloping tanks as on the BMW R 1250 GS. The sturdy tank bag offers up to 20 liters of generous storage space. Equipped with the MOLLE attachment for holding the smartphone or tablet holder, the PRO GS is the perfect companion for extended rides. The PRO tank bags offer elegant and timeless design combined with durable materials and well thought-out product features: Ballistic nylon protects luggage from impact, wind and weather. The top made of laminated EVA material gives the bags a distinctive shape and, in conjunction with a MOLLE attachment, ensures a secure hold for smartphone and tablet holders.The guide rail of the top ring, which is already attached at the factory, allows a much simplified adjustment of the tank bag to the shape of the tank and the ergonomic needs of the rider. Only the PRO tank bags offer this flexibility. To match, SW-MOTECH offers the patented PRO tank rings made of fiberglass-reinforced plastic. They are manufactured to match the motorcycle model. (You can find these in the vehicle category and under the article under accessories)The robust PRO tank ring with magnetic guide aid secures the PRO tank bags with a mechanical QUICK-LOCK snap-in lock. This allows the tank bags to be attached or removed with just one movement. Volume expansion by zipper from 16 to 20 liters 2 outside pockets The patented PRO tank ring gives PRO tank bags a secure hold Magnetic guide in PRO tank ring for easy attachment Pre-mounted guide rail of the top ring for ergonomic adjustment of the tank bag Top and bottom of tank bag made of laminated and dimensionally stable EVA plastic Made of robust and especially UV-resistant 1680D Ballistic Nylon with water-repellent inner coating MOLLE attachment made of sturdy Hypalon material on the top for smartphone and tablet holder Reflective details for better visibility Mesh pockets inside Weather protection with included rain cover Robust carrying handle Cable grommet on the front and back side Can be used with cable lock or anti-theft device Scope of delivery 1 x PRO GS tank bag 1 x PRO top ring 1 x PRO GS rain cover Mounting instructions Mounting material Details Material: 1680D Ballistic Nylon Color: black / gray Dimensions: 42,0 x 34,0 x 30,0 cm Total weight: 1 ,5 kg Total volume: 16,0-20,0 l Note Make sure that there is sufficient distance between the tank bag and the tank surface (even when loaded) to avoid paint damage. If the distance is small, the tank surface can be additionally protected by paint protection film or a tank pad. For mounting on the tank, the appropriate PRO tank ring is required. (You can find this in the vehicle category and under the article under accessories) The tank bags of the PRO series can not be combined with the EVO tank rings.
SW-Motech PRO Trial tank bag Honda CB 650 R (18-), RH02
The PRO Trial is the ideal companion for long tours. The tank bag has 18 liters of storage space with open volume expansion and is particularly suitable for use on slightly curved tanks. Two external pockets provide additional storage space. The PRO tank bags offer elegant and timeless design combined with durable materials and well thought-out product features: Ballistic nylon protects luggage from impact, wind and weather. The top made of laminated EVA material gives the bags a distinctive shape and, in conjunction with a MOLLE attachment, ensures a secure hold for smartphone and tablet holders.The guide rail of the top ring, which is already attached at the factory, allows a much simplified adjustment of the tank bag to the shape of the tank and the ergonomic needs of the rider. Only the PRO tank bags offer this flexibility. To match, SW-MOTECH offers the patented PRO tank rings made of fiberglass-reinforced plastic. They are manufactured to match the motorcycle model. (You can find these in the vehicle category and under the article under accessories)The robust PRO tank ring with magnetic guide aid secures the PRO tank bags with a mechanical QUICK-LOCK snap-in lock. This allows the tank bags to be attached or removed with just one movement. Volume expansion by zipper from 13 to 18 liters 2 outside pockets The patented PRO tank ring gives PRO tank bags a secure hold Magnetic guide in PRO tank ring for easy attachment Pre-mounted guide rail of the top ring for ergonomic adjustment of the tank bag Top and bottom of tank bag made of laminated and dimensionally stable EVA plastic Made of robust and especially UV-resistant 1680D Ballistic Nylon with water-repellent inner coating MOLLE attachment made of sturdy Hypalon material on the top for smartphone and tablet holder Reflective details for better visibility Mesh pockets inside Weather protection with included rain cover Robust carrying handle Cable grommet on the front and back side Can be used with cable lock or anti-theft device Scope of delivery 1 x PRO Trial tank bag 1 x PRO top ring 1 x PRO Trial rain cover Mounting instructions Mounting material Details Material: 1680D Ballistic Nylon Color: black / gray Dimensions: 37,0 x 31,0 x 24,0 cm Total weight: 1 ,6 kg Total volume: 13,0-18,0 l Note Make sure that there is sufficient distance between the tank bag and the tank surface (even when loaded) to avoid paint damage. If the distance is small, the tank surface can be additionally protected by paint protection film or a tank pad. For mounting on the tank, the appropriate PRO tank ring is required. (You can find this in the vehicle category and under the article under accessories) The tank bags of the PRO series can not be combined with the EVO tank rings.
SW-Motech PRO City tank bag Honda CB 650 R (18-), RH02
The PRO City was developed for adventure bikes and other motorcycles with steeply sloping tank shape. Although the tank bag offers up to 14 liters of storage space, the slim shape allows an optimal steering angle even when fully packed. Two exterior pockets provide additional storage space. PRO tank bags offer elegant and timeless design combined with durable materials and well thought-out product features: Ballistic nylon protects luggage from impact, wind and weather. The top made of laminated EVA material gives the bags a distinctive shape and, in conjunction with a MOLLE attachment, ensures a secure hold for smartphone and tablet holders.The guide rail of the top ring, which is already attached at the factory, allows a much simplified adjustment of the tank bag to the shape of the tank and the ergonomic needs of the rider. Only the PRO tank bags offer this flexibility. To match, SW-MOTECH offers the patented PRO tank rings made of fiberglass-reinforced plastic. They are manufactured to match the motorcycle model. (You can find these in the vehicle category and under the article under accessories)The robust PRO tank ring with magnetic guide aid secures the PRO tank bags with a mechanical QUICK-LOCK snap-in lock. This allows the tank bags to be attached or removed with just one movement. Volume expansion by zipper from 11 to 14 liters 2 outside pockets The patented PRO tank ring gives PRO tank bags a secure hold Magnetic guide in PRO tank ring for easy attachment Pre-mounted guide rail of the top ring for ergonomic adjustment of the tank bag Top and bottom of tank bag made of laminated and dimensionally stable EVA plastic Made of robust and especially UV-resistant 1680D Ballistic Nylon with water-repellent inner coating MOLLE attachment made of sturdy Hypalon material on the top for smartphone and tablet holder Reflective details for better visibility Mesh pockets inside Weather protection with included rain cover Robust carrying handle Cable grommet on the front and back side Can be used with cable lock or anti-theft device Scope of delivery 1 x PRO City tank bag 1 x PRO top ring 1 x PRO City rain cover Mounting instructions Mounting material Details Material: 1680D Ballistic Nylon Color: black / gray Dimensions: 37,0 x 29,5 x 25,0 cm Total weight: 1 ,3 kg Total volume: 11,0-14,0 l Note Make sure that there is sufficient distance between the tank bag and the tank surface (even when loaded) to avoid paint damage. If the distance is small, the tank surface can be additionally protected by paint protection film or a tank pad. For mounting on the tank, the appropriate PRO tank ring is required. (You can find this in the vehicle category and under the article under accessories) The tank bags of the PRO series can not be combined with the EVO tank rings.
SW-Motech PRO Daypack tank bag Honda CB 650 R (18-), RH02
The universal fit makes the tank bag PRO Daypack - like the PRO Micro - a real all-rounder. However, the larger daypack, which offers 5 to 8 liters of storage space, can come up with some extras. The PRO tank bags offer elegant and timeless design in combination with durable materials and well thought-out product features: Ballistic nylon protects luggage from impact, wind and weather. The top made of laminated EVA material gives the bags a distinctive shape and, in conjunction with a MOLLE attachment, ensures a secure hold for smartphone and tablet holders.The guide rail of the top ring, which is already attached at the factory, allows a much simplified adjustment of the tank bag to the shape of the tank and the ergonomic needs of the rider. Only the PRO tank bags offer this flexibility. To match, SW-MOTECH offers the patented PRO tank rings made of fiberglass-reinforced plastic. They are manufactured to match the motorcycle model (You can find these in the vehicle category and under the article under accessories)The robust PRO tank ring with magnetic guide aid secures the PRO tank bags with a mechanical QUICK-LOCK latch. This allows the tank bags to be attached or removed with just one movement. Volume expansion by zipper from 5 to 8 liters The patented PRO tank ring gives PRO tank bags a secure hold Magnetic guide in PRO tank ring for easy attachment Pre-mounted guide rail of the top ring for ergonomic adjustment of the tank bag Top and bottom of tank bag made of laminated and dimensionally stable EVA plastic Made of robust and especially UV-resistant 1680D Ballistic Nylon with water-repellent inner coating MOLLE attachment made of sturdy Hypalon material on the top for smartphone and tablet holder Reflective details for better visibility Mesh pockets inside Weather protection with included rain cover Robust carrying handle Cable grommet on the front and back side Can be used with cable lock or anti-theft device Scope of delivery 1 x PRO Daypack tank bag 1 x PRO top ring 1 x rain cover PRO Daypack Mounting instructions Mounting material Details Material: 1680D Ballistic Nylon Color: black / gray Dimensions: 29,5 x 22,5 x 12,5 cm Total weight: 1 ,0 kg Total volume: 5 ,0-8,0 l Note For mounting on the tank, the matching PRO tank ring is required. (You can find this in the vehicle category and under the article under accessories) The tank bags of the PRO series can not be combined with the EVO tank rings.
SW-Motech PRO Daypack Magnetic Tank Bag Honda CB 650 R (18-), RH02
Strong magnets give the PRO Daypack tank bag a firm grip even on uneven roads. A sophisticated base plate design allows detachment from the tank without much effort.The PRO tank bags offer elegant and timeless design combined with durable materials and well thought-out product features: Ballistic nylon protects luggage from impact, wind and weather. The top made of laminated EVA material gives the bags a distinctive shape and, in conjunction with a MOLLE attachment, ensures a secure hold for smartphone and tablet holders. Suitable for almost all steel tanks Coated underside Made of robust and especially UV-resistant 1680D Ballistic Nylon with water-repellent inner coating MOLLE attachment made of sturdy Hypalon material on the top for smartphone and tablet holder Reflective details for better visibility Mesh pockets inside Weather protection with included rain cover Robust carrying handle Cable aperture on front and back side Scope of delivery 1 x PRO Daypack Magnet tank bag 1 x rain cover PRO Daypack 1 x paint protection film Details Material: 1680D Ballistic Nylon Color: black / gray Dimensions: 28,5 x 22,5 x 12,0 cm Total volume: 6 ,0-9,0 l
SW-Motech PRO Micro tank bag Honda CB 650 R (18-), RH02
Discreet and straightforward: The PRO Micro fits on almost any tank and safely transports small necessities such as vehicle documents and valuables. Like all PRO tank bags, the Micro sits on an EVA plastic base that guarantees high dimensional stability. With the help of a zipper, the volume of the tank bag can be expanded. The PRO tank bags offer elegant and timeless design combined with durable materials and well thought-out product features: Ballistic nylon protects the luggage from shocks, wind and weather. The top made of laminated EVA material gives the bags a distinctive shape and, in conjunction with a MOLLE attachment, ensures a secure hold for smartphone and tablet holders.The guide rail of the top ring, which is already attached at the factory, allows a much simplified adjustment of the tank bag to the shape of the tank and the ergonomic needs of the rider. Only the PRO tank bags offer this flexibility. To match, SW-MOTECH offers the patented PRO tank rings made of fiberglass-reinforced plastic. They are manufactured to match the motorcycle model. (You can find these in the vehicle category and under the article under accessories)The robust PRO tank ring with magnetic guide aid secures the PRO tank bags with a mechanical QUICK-LOCK snap-in lock. This allows the tank bags to be attached or removed with just one movement. Volume expansion by zipper from 3 to 5 liters The patented PRO tank ring gives PRO tank bags a secure hold Magnetic guide in PRO tank ring for easy attachment Pre-mounted guide rail of the top ring for ergonomic adjustment of the tank bag Top and bottom of tank bag made of laminated and dimensionally stable EVA plastic Made of robust and especially UV-resistant 1680D Ballistic Nylon with water-repellent inner coating MOLLE attachment made of sturdy Hypalon material on the top for smartphone and tablet holder Reflective details for better visibility Mesh pockets inside Weather protection with included rain cover Robust carrying handle Cable grommet on the front and back side Can be used with cable lock or anti-theft device Scope of delivery 1 x PRO Micro tank bag 1 x PRO top ring 1 x PRO Micro rain cover Mounting instructions Mounting material Details Material: 1680D Ballistic Nylon Color: black / gray Dimensions: 27,0 x 20,5 x 11,0 cm Total weight: 0 ,8 kg Total volume: 3 ,0-5,0 l Note For mounting on the tank, the matching PRO tank ring is required. (You can find this in the vehicle category and under the article under accessories) The tank bags of the PRO series can not be combined with the EVO tank rings.
SW-Motech PRO tank ring Honda CB 650 R (18-), RH02
The PRO tank ring perfectly combines the innovative power of two German companies: The QUICK-LOCK latching mechanism of the SW-MOTECH tank rings, which has been tried and tested for years, is now even easier to operate thanks to the magnetic guide aid of the Fidlock technology. The positioning of the top ring has been significantly improved: the sliding top ring is already pre-mounted on the tank bag with a guide rail and the tank bag does not have to be drilled into. This means that the upper ring can be individually aligned on the guide rail on the underside of the tank bag. Once the right position has been found, the upper ring is screwed tight. When changing to a different motorcycle, the position of the upper ring can be adjusted accordingly.The magnetic guide aid, developed by Fidlock, complements SW-MOTECH's already sophisticated mechanical QUICK-LOCK snap-on closure: the magnets guide the top ring into the right position on the tank ring and the closure locks firmly into place. Thus, the force of the magnets supports the placement of the tank bag. Attach the tank bag with a flick of the wrist and ride off - the luggage sits securely and it's fun, too.The mechanical latching mechanism secures the tank bag and the magnets bring the two parts of the ring together. The robust fiberglass-reinforced plastic with its high-precision latching geometry is responsible for keeping the tank bag firmly in place in all road conditions.The patented PRO tank ring is matched to the tank filler neck of the motorcycle model. This ensures the best possible positioning on the tank. Model-specific adapter ring for best fit and individual solutions Easy mounting on the tank filler neck Magnetic guide in PRO tank ring for easy attachment Quick release via pull strap allows removal of the PRO tank bag in one easy step The patented PRO tank ring gives PRO tank bags a secure hold Easy refueling, tank cap can be opened as usual Made of glass fiber reinforced polyamide Paint-friendly solution: the tank bag does not rest on the tank Scope of delivery 1 x PRO tank ring Fitting instructions Mounting material Details Material: glass fiber reinforced plastic / aluminum Color: black Note The tank rings of the PRO series can not be combined with the EVO tank bags.
