C-Bow side carrier black for Honda CBR 600 F (99-10) Hepco & Becker
The C-Bow side bag holder is designed to hold a variety of Hepco & Becker bags. Softbags for sporty, dynamic motorcycles and saddlebags for choppers and cruisers can be attached to the motorcycle with the C-Bow holder. Its elegant, unobtrusive design blends in perfectly with the overall lines of the vehicle. Naturally, it keeps the saddlebags safely away from the hot exhaust silencer. Thanks to modern C-Bow technology, the matching bags can be attached to the C-Bow simply and easily with just one click and locked to prevent theft. The bags are securely fastened to the motorcycle and remain in position even when loaded. On many models, the indicators remain in their original position. Further information can be found in the fitting instructions. Features: Solid side carrier for mounting Hepco & Becker C-Bow side bags and panniers High-quality surface finish Normal Hepco & Becker hard cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended payload: 5 kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorcycle manufacturer's specifications for any restrictions that may apply) Can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific information for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage carriers do not require an ABE or registration in the papers Weight: 2.0 kg Color: black Scope of delivery: Left, right, mounting material and instructions Notes: Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.
IXIL stainless steel muffler HEXOVAL XTREM Evolution for Honda CBR 600 F (Bj.99-00)
Stainless steel silencer, E-approved.All IXIL mufflers have a high-quality finish with stainless steel interior in common. Combined with the available outer shells made of black painted or brushed stainless steel, you get a visually and technically high-quality silencer. Super optics and deep, rich sound fulfill all customer wishes. E-tested, of course. All IXIL mufflers are supplied as bolt-on or slip-on replacement mufflers. Included in delivery are all parts needed for mounting. Suitable for the following vehicles: ManufacturerModelChassis numberYear of manufacture fromYear of manufacture until Honda CBR 600 F PC35 1999 1999 Honda CBR 600 F PC35 2000 2000 Tailpipe diameter: 130 x 100 mmTailpipe length: 393 mmWeight: 2.1 kgShape: hexovalNote: Without noise killer the operating permit expires.
OptiMATE 5 Battery charger and maintenance unit
The OptiMATE 5 battery charger and maintenance unit is a reliable charger and maintenance unit for your 12 V lead batteries or maintenance-free GEL batteries. With a nominal capacity of 7.5 to 120 Ah, this device is perfect for use in cars, motorcycles, boats or motorhomes. It allows you to charge your batteries quickly and effectively while providing optimal maintenance and care. The OptiMATE 5 battery charger and maintainer features an intelligent charge control that automatically stops charging once the battery is fully charged. This prevents overcharging and extends the life of your battery. In addition, the device monitors the condition of your battery and performs automatic maintenance when needed. It detects and fixes problems such as sulfate formation, which can lead to a reduction in battery performance. The OptiMATE 5 battery charger and maintenance unit is easy to use and can be plugged into any standard outlet. It is rugged and durable and is perfect for outdoor use.
OptiMATE 5 Battery charger and maintenance unit
The OptiMATE 5 battery charger and maintenance unit is a reliable charger and maintenance unit for your 12 V lead batteries or maintenance-free GEL batteries. With a nominal capacity of 7.5 to 120 Ah, this device is perfect for use in cars, motorcycles, boats or motorhomes. It allows you to charge your batteries quickly and effectively while providing optimal maintenance and care. The OptiMATE 5 battery charger and maintainer features an intelligent charge control that automatically stops charging once the battery is fully charged. This prevents overcharging and extends the life of your battery. In addition, the device monitors the condition of your battery and performs automatic maintenance when needed. It detects and fixes problems such as sulfate formation, which can lead to a reduction in battery performance. The OptiMATE 5 battery charger and maintenance unit is easy to use and can be plugged into any standard outlet. It is rugged and durable and is perfect for outdoor use.
Side case carrier fixed black for Honda CBR 600 F (99-10) Hepco & Becker
The bolted side case carriers from Hepco & Becker are firmly attached to the motorcycle frame. Almost all touring side case systems from Hepco & Becker fit onto this carrier. The cases are secured to the carrier using a metal retaining lock to prevent theft. An additional lock adapter is required for this. This is normally supplied with the side cases. This lock adapter is bolted to the right and left of the carrier at the rear and holds the case retaining lock. The model-specific carriers are solidly designed and offer effective protection for the rider's or pillion passenger's legs even in the event of a fall.The side case carriers from Hepco & Becker can usually be combined with Hepco & Becker rear carriers without any problems. Please observe the fitting instructions and the model-specific information. Details: Tubular steel construction MADE IN GERMANY Firmly bolted to the motorcycle frame High-quality surface finish Fits most Hepco & Becker hard-shell side cases (please note the model-specific information on the respective carrier for any restrictions that may apply) Indicators usually remain in their original position, but sometimes have to be moved to ensure a certain beam angle (please refer to the installation instructions for the product) Luggage systems generally do not require an ABE or registration Recommended load: 10 kg in each side case Tube diameter: 16 mm Color: black Weight: 3.8 kg kg Scope of delivery: Right + left incl. mounting material and instructions
Stompgrip black Volcano for Honda CBR600F (Sport) / VFR800 (02-13)
Stompgrip Tank Pad black, Volcano, Streetbike Tank Kit - Tank sides, for HondaCBR600F (Sport) Type: PC35 (model year 2000-'06)VFR800 / Intercepter Type: RC46 (model year 2002-'13) With the Stompgrip Tank Pads for street-legal motorcycles, as well as for racing, you have more grip and control on your legs when accelerating, braking and leaning.Probably the best known and most popular grip profile: VOLCANO. This classic surface offers the rider excellent grip and control in any (lean) angle.Anyone looking for even more grip at the limit or in extreme weather conditions will be delighted with the ultimate SUPER VOLCANO design.If you are looking for more understatement and vintage, you will find what you are looking for with the ICON DESIGN. It is more comfortable and softer and still offers approx. 75% grip compared to the classic VOLCANO design.Stompgrip traction pads fit every motorcycle individually. If no suitable Stompgrip pad is available, use the Stompgrip Universal Pads or cut them to size as required. The pads are available in black or transparent.
SW-Motech ION L motorcycle tail bag Honda CBR 600 F (99-08), PC35
With 50 l volume, the ION L rear bag offers enough storage space for longer tours. Compression straps prevent fluttering at low load and allow, if necessary, the fixation of additional luggage on the bag. Two exterior side pockets give quick access to essentials. Robust clamp closures and loop straps allow quick lashing and, with its flexible shape and anti-slip bottom, give the bag a secure hold on the pillion seat or rear of the vehicle. The carrying handle is another plus point of the spacious ION L tail bag. ION series tail bags - available in S, M and L versionsThree sizes, elegant looks, attractive price: the ION series tail bags are available in three shapes and can be lashed to almost any motorcycle rear. Made of black 600D polyester with elements of soft vinyl, the tail bags combine an attractive design with features suitable for touring, such as optimized storage space, non-slip underside, lockable main compartment zipper and a waterproof inner pocket. The reflective textile piping is barely noticeable in daylight, but increases visibility many times over in the dark. Optimized for pillion seat or vehicle rear of many models 50 l storage space with low weight Robust clamp fasteners for reliable 4-point attachment with loop straps Compression straps with clip adapters prevent fluttering and allow lashing of additional luggage Easy access: 2 external side pockets and mesh pocket inside the lid Large main compartment for individual loading Practical carrying handle Anti-slip underside for best grip Attractive look due to the combination of polyester textile fabric with black soft vinyl Reflective details for more safety in road traffic Discreet design elements: embroidered SW-MOTECH logo and bull in silver gray Durable, especially UV-resistant 600D polyester with water-repellent inner coating Waterproof inner bag included Scope of delivery 1 x ION L tail bag 1 x waterproof inner bag 4 x loop straps 2 x compression straps 2 x straps to attach to license plate holder 1 x paint protection film Details Material: 600D Polyester / Soft-Vinyl Color: black / black Dimensions: 50,0 x 70,0 x 30,0 cm Total weight: approx. 1,3 kg Total volume: 50,0 l
SW-Motech ION M Motorcycle Tail Bag Honda CBR 600 F (99-08), PC35
The ION M tail bag can be fixed to almost any motorcycle rear thanks to optimized fit and the curved and anti-slip bottom. Particularly practical: the tail bag has two external pockets and a mesh compartment inside the lid. The storage space of 26 l, which is easily accessible via the large lid, can be increased to 36 l by two side extensions if required. The stiffened sides prevent the bag from flapping - even during sporty riding. An integrated carrying handle and the included shoulder strap make the ION M rear bag a comfortable travel bag at the same time. Rear bags of the ION series - available as S, M and L variantsThree sizes, elegant look, attractive price: The rear bags of the ION series are available in three shapes and can be lashed to almost any motorcycle rear. Made of black 600D polyester with elements of soft vinyl, the tail bags combine an attractive design with features suitable for touring, such as optimized storage space, non-slip underside, lockable main compartment zipper and a waterproof inner pocket. The reflective textile piping is barely noticeable in daylight, but increases visibility many times over in the dark. Optimized for pillion seat or vehicle rear of many models Volume expansion from 26 to 36 l via two side zippers, width varies from 44 to 54 cm 4 D-rings to fix the shoulder strap or other luggage No flapping thanks to stiffened sides Easy access: 2 outside pockets and mesh pocket inside the lid Large main compartment for individual loading Practical carrying handle Anti-slip underside for best grip Attractive look due to the combination of polyester textile fabric with black soft vinyl Reflective details for more safety in road traffic Discreet design elements: embroidered SW-MOTECH logo and bull in silver gray Durable, especially UV-resistant 600D polyester with water-repellent inner coating Waterproof inner bag included Scope of delivery 1 x ION M tail bag 1 x waterproof inner bag 4 x loop straps long (67 cm) 4 x loop straps short (17 cm) 2 x straps to attach to license plate holder 1 x shoulder strap 1 x paint protection foil Details Material: 600D Polyester / Soft-Vinyl Color: black / black Dimensions: 30,0 x 44,0 x 30,0 cm Total weight: approx. 1,5 kg Total volume: 26,0-36,0 l
SW-Motech ION S Motorcycle Tail Bag Honda CBR 600 F (99-08), PC35
Ideal for small and sporty bikes: The volume of the ION S rear bag can be expanded via a zipper from 7 to 15 l and thus offers enough storage space for drink, change of clothes, high-visibility vest and other small items that you need on a day trip or short trip. The compact bag can be lashed to riveted D-rings with included loop straps. In addition, two Velcro tabs and a slot on the bottom allow for quick and secure attachment to the seat or luggage rack. The stiffened sides, the padded lid and straps to tighten the volume expansion guarantee a firm shape even with sporty driving. Particularly quickly at hand are things that are stowed in the outer pocket or in the mesh compartment inside the lid. A carrying handle makes the ION tail bag a practical travel companion even off the road. Rear bags of the ION series - available as S, M and L variantsThree sizes, elegant looks, attractive price: the ION series tail bags are available in three shapes and can be lashed to almost any motorcycle tail. Made of black 600D polyester with elements of soft vinyl, the tail bags combine an attractive design with features suitable for touring, such as optimized storage space, non-slip underside, lockable main compartment zipper and a waterproof inner pocket. The reflective textile piping is hardly noticeable in daylight, but increases visibility many times over in the dark. Compact rear bag, ideal for small and sporty bikes Volume expansion from 7 to 15 l, height varies between 10 and 18 cm D-rings for reliable 4-point attachment with loop straps Two integrated Velcro straps plus insert for fastening under the seat or luggage rack Easy access: outer pocket and mesh pocket inside the lid Large main compartment for individual loading Practical carrying handle Anti-slip underside for best grip Attractive look due to the combination of polyester textile fabric with black soft vinyl Reflective details for more safety in road traffic Discreet design elements: embroidered SW-MOTECH logo and bull in silver gray Durable, especially UV-resistant 600D polyester with water-repellent inner coating Waterproof inner bag included Scope of delivery 1 x ION S tail bag 1 x waterproof inner bag 1 x strap set for tail bag (20 mm wide, 2x 37 cm long, 2x 70 cm long) 1 x paint protection film Details Material: 600D Polyester / Soft-Vinyl Color: black / black Dimensions: 33,0 x 29,0 x 10,0 cm Total weight: approx. 0,6 kg Total volume: 7,0-15,0 l
Takkoni rear muffler Honda CBR 600 F, stainless steel black, E-approved
Takkoni stands for proven technology and sporty design. With an excellent price-performance ratio, Takkoni convinces with the highest quality. The stainless steel silencers are supplied with a brushed surface and all the necessary mounting parts as a bolt on or slip on replacement silencer. Since the Takkoni mufflers are E-approved, the integrated noise killer may only be removed for racing use or for show purposes! Suitable for following Honda models: Model Chassis number Year of manufacture from Year of manufacture until CBR 600 F PC35 1999 2000 Details muffler:Oval shapeLength 450 mmWidth 100 mmHeight 120 mmWeight 2,92 kgNote: Without noise killer the operating license expires.
Takkoni rear muffler Honda CBR 600 F, stainless steel silver, E-approved
Takkoni stands for proven technology and sporty design. With an excellent price-performance ratio, Takkoni convinces with the highest quality. The stainless steel silencers are supplied with a brushed surface and all the necessary mounting parts as a bolt on or slip on replacement silencer. Since the Takkoni mufflers are E-approved, the integrated noise killer may only be removed for racing use or for show purposes! Suitable for following Honda models: Model Chassis number Year of manufacture from Year of manufacture until CBR 600 F PC35 1999 2000 Details muffler:Oval shapeLength 450 mmWidth 100 mmHeight 120 mmWeight 2,92 kgNote: Without noise killer the operating license expires.
Tank protector with Honda Wing logo Original for all Honda models
Tank protector with Honda Wing logo Original for all Honda models
Tank ring Basic incl. tank bag lock unit for Honda CBR 600 F (97-13) Hepco & Becker
This functional tank ring enables the attachment of a tank bag from Hepco&Becker. The scope of delivery includes a BASIC tank ring and the counterholder, which can be individually screwed to the tank bag depending on the tank shape and handlebar angle. The tank cap can still be opened without any problems when the tank ring is fitted. Features: Absolutely secure hold, even at high speeds Simple operation thanks to mechanical locking mechanism The Hepco&Becker tank bag is simply put on and locks clearly audible on the tank ring Unlocking: The mechanism is unlocked by a strap at the front of the tank bag in the direction of travel and the tank bag is then simply removed Tank bag systems do not require an ABE or registration in the papers in Germany. Recommended maximum speed with tank bag fitted: 130 km/h Recommended load in the tank bag: approx. 3 kg Weight: 0.3 kg Color: black Please note the motorcycle manufacturer's specifications and the model-specific information in the instructions or here with the product Difference between Lock-it and BASIC tank rings: The general function and operation remains the same. However, compared to the Lock-it tank ring, the Basic tank ring only locks mechanically. With the Lock-it tank ring, the magnets help with centering. The difference lies purely in the two magnetic or plastic domes that are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions. Notes: Not suitable for: Street Enduro M, Epic 16 Identical to universal tank ring 516007-7 A tank bag with Lock-it counterholder cannot be mounted on a BASIC tank ring and vice versa. Tank bag counterholder and tank ring must be from the same system.
Tankpad / tank protector with CBR logo
Are you tired of your motorcycle paint constantly marked by scratches and abrasion? Then we have the perfect solution for you! The original tank pad / tank protector with CBR logo reliably protects your paint from damage and also looks really cool.The arrow-shaped tank pad in gray is decorated with the CBR logo and gives your motorcycle a sporty look. But not only the design convinces, but also the functionality. The tank pad is made of high-quality material and offers optimum protection against scratches and abrasion by belt buckles, zippers and other objects.The installation of the tank protector is child's play and can be done within a few minutes. Thanks to the self-adhesive back, the pad can be easily applied to the tank and holds there securely and firmly.Honda attaches great importance to quality and durability. Therefore, the tank pad / tank protector with CBR logo is not only robust and durable, but also UV-resistant and weatherproof. So your motorcycle remains protected even in wind and weather and always looks like new.
Topcase carrier for Honda CBR 600 F (Bj.99-09) Givi
for Honda CBR 600 F (Bj.99-09) Specific topcase carrier for MONOKEY or MONOLOCK cases / to be mounted with the MONOKEY plate M3 or the MONOLOCK plate MM (not included)Maximum load for MONOKEY case 10 kg, for MONOLOCK case 3 kg.You can find an overview of our suitcases under the heading Suitcases & Luggage.Important note:GIVI products are designed for vehicles in original condition.Compatibility with accessories from other manufacturers such as exhaust systems, etc. can not be guaranteed.
Tubular luggage rack top case carrier black for Honda CBR 600 F (99-10) Hepco & Becker
Proven Tubular luggage racks Topcaseträger for Hepco & Becker Topcases in the highest quality. Hepco & Becker luggage racks are specially designed for almost all of our top cases. But not only new top cases fit. Older Hepco & Becker models can also be fitted. The basic mount has not changed. Not suitable for: Topcase "Orbit" and topcases with universal plate.The carriers are manufactured specifically for each model and only fit the motorcycle listed in the fitting instructions. Thanks to the construction made of German quality steel, Hepco & Becker luggage racks guarantee maximum strength and a very high level of safety. If required, soft luggage can also be lashed down without any problems; the tubular luggage rack offers many options for this. If there is still not enough space, the luggage rack can be combined with the Hepco & Becker universal luggage rack extension. Details: Top case is pushed onto the tubular luggage rack and locked to the carrier with a metal retaining lock. Recommended load: approx. 5 kg (Please note the model-specific information on the respective carrier and the motorcycle manufacturer's specifications) Can usually be combined with side case carriers or C-Bow holders without any problems (observe mounting instructions) Luggage racks generally do not require an ABE or registration. Scope of delivery: Luggage rack + mounting material + instructions Made in Germany Weight: 1.5 kg
Windshield original type - height 400 mm for Honda CBR 600 F (01-02), transparent
Details: Dimensions (height x width): 400 mm x 430 mm Thickness: 3 mm Simple assembly Isotta quality
