OptiMATE 5 Battery charger and maintenance unit
The OptiMATE 5 battery charger and maintenance unit is a reliable charger and maintenance unit for your 12 V lead batteries or maintenance-free GEL batteries. With a nominal capacity of 7.5 to 120 Ah, this device is perfect for use in cars, motorcycles, boats or motorhomes. It allows you to charge your batteries quickly and effectively while providing optimal maintenance and care. The OptiMATE 5 battery charger and maintainer features an intelligent charge control that automatically stops charging once the battery is fully charged. This prevents overcharging and extends the life of your battery. In addition, the device monitors the condition of your battery and performs automatic maintenance when needed. It detects and fixes problems such as sulfate formation, which can lead to a reduction in battery performance. The OptiMATE 5 battery charger and maintenance unit is easy to use and can be plugged into any standard outlet. It is rugged and durable and is perfect for outdoor use.
OptiMATE 5 Battery charger and maintenance unit
The OptiMATE 5 battery charger and maintenance unit is a reliable charger and maintenance unit for your 12 V lead batteries or maintenance-free GEL batteries. With a nominal capacity of 7.5 to 120 Ah, this device is perfect for use in cars, motorcycles, boats or motorhomes. It allows you to charge your batteries quickly and effectively while providing optimal maintenance and care. The OptiMATE 5 battery charger and maintainer features an intelligent charge control that automatically stops charging once the battery is fully charged. This prevents overcharging and extends the life of your battery. In addition, the device monitors the condition of your battery and performs automatic maintenance when needed. It detects and fixes problems such as sulfate formation, which can lead to a reduction in battery performance. The OptiMATE 5 battery charger and maintenance unit is easy to use and can be plugged into any standard outlet. It is rugged and durable and is perfect for outdoor use.
Short license plate holder incl. license plate light for CBR 600 RR 03-06 / CBR 1000 RR 04-07
The HIGHSIDER license plate holder AKRON-RS fits through its design perfectly to the lines of your bike.The model-specific bracket of the AKRON-RS allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting.To avoid damage to cables, all sharp-edged feedthroughs are protected by a rubber membrane grommet.The license plate is made of sheet steel and 2 mm thick. Precise cutting is done by laser. After edging, the plate is given a weather-resistant black powder coating.This ensures an optimal fit and durability.The stepless adjustment allows you to bring the plate without drilling in the desired position. To keep the plate in this position, there is an additional locking screw.The turn signal holders of the AKRON-RS are adjustable in width and thus suitable for any type of accessory turn signals. This adjustability allows you to adjust the position for your turn signals to the most different license plates. To allow the installation of the turn signals without separation from the wiring harness, the 10 mm holes are slotted to the side.You can also adjust the position of the reflector individually via a slider. An adaptation to the different designs of EU license plates is therefore no problem.To screw the license plate securely and reduce vibrations, two rubber washers are included. Another rubber buffer supports the license plate on its underside.Details:- model-specific mount- infinitely adjustable turn signal holder- slotted turn signal holder for easy mounting without cable separation- infinitely adjustable reflector, E-approved- suitable for european license plates- infinitely adjustable angle of inclination- additional screw for optimal position security- easy fixation without further work steps (e.g. drilling)- easy mounting of the license plate through slotted holesThe scope of delivery of the AKRON-RS includes- Model-related holder with mounting parts- AKRON-RS license plate holder- Adjustable turn signal brackets- E-tested reflector with adjustable holder- Mounting instructionsNotes:- A special turn signal holder is optionally available for the original turn signals in the accessories tab.- If there are side reflectors mounted on your original license plate holder, they must be reattached in a suitable position or replaced with new ones.Tips:If you have not found a model-specific license plate holder for your vehicle, the universal license plate holders from HIGHSIDER, which are available in many different designs, are certainly a good alternative.
Short license plate holder incl. license plate light for CBR 600 RR 03-06 / CBR 1000 RR 04-07
Making good bikes perfect. Following this motto, LSL has developed the license plate holder MANTIS-RS.It fits perfectly to your motorcycle and emphasizes the lines of your bike with its sporty design.And as usual, LSL has thought of everything.The model-specific bracket of the MANTIS-RS allows replacement without further drilling or cutting on the vehicle.The design fits perfectly to the rear of your bike and uses the original mounting points of the vehicle.Sharp-edged feedthroughs are protected with rubber membrane grommets against damage to the cables.The license plate is made of 2 mm thick sheet steel, laser-cut, edged and weather-resistant black powder-coated.The license plate is fixed in the correct position by an additional locking screw.The width-adjustable turn signal holders of the MANTIS-RS are suitable for any type of accessory turn signals. Through this adjustment option, you will find the right position for your turn signals. The adaptation to the most different EU license plates is therefore no problem. The mounting holes of the turn signals have a diameter of 10 mm and are slotted to the side. This makes it possible to mount the turn signals without disconnecting them from the wiring harness.The slider for mounting the rear reflector is also individually adjustable. An adjustment to the different designs of EU license plates is therefore no problem.The two rubber washers supplied are used for vibration-reducing bolting of the license plate. An additional rubber buffer supports the license plate on the underside.Details:- model-specific bracket- steplessly adjustable turn signal holder- slotted turn signal holder for easy mounting without cable separation- infinitely adjustable reflector, E-approved- suitable for european license plates- infinitely adjustable angle of inclination- additional screw for optimal position security- easy fixation without further work steps (e.g. drilling)- easy mounting of the license plate through slotted holesThe scope of delivery of the MANTIS-RS includes:- Model-related holder with mounting parts- MANTIS-RS license plate holder- Adjustable turn signal holders- E-approved reflector with adjustable holder- Mounting instructionsNotes:- A special turn signal holder is optionally available for the original turn signals in the accessories tab.- If side reflectors are mounted on your original license plate holder, they must be reattached in a suitable position or replaced with new ones.Tip:If you haven't found a model-specific license plate holder for your vehicle, you're sure to find what you're looking for in LSL's universal license plate holders, which are available in many different designs.
Stompgrip black Volcano for Honda CBR 600 RR 2003-06
Stompgrip Tank Pad black, Volcano, Streetbike Tank Kit - Tank sides, for Honda CBR600RR (Type PC37), model year 2003-'06 With the Stompgrip Tank Pads for street-legal motorcycles, as well as for racing, you have more grip and control on your legs when accelerating, braking and leaning. Probably the best known and most popular grip profile: VOLCANO. This classic surface offers the rider excellent grip and control in any (lean) angle.Anyone looking for even more grip at the limit or in extreme weather conditions will be delighted with the ultimate SUPER VOLCANO design.If you are looking for more understatement and vintage, you will find what you are looking for with the ICON DESIGN. It is more comfortable and softer and still offers approx. 75% grip compared to the classic VOLCANO design.Stompgrip traction pads fit every motorcycle individually. If no suitable Stompgrip pad is available, use the Stompgrip Universal Pads or cut them to size as required. The pads are available in black or transparent.
SW-Motech Drybag 180 rear bag for Honda CBR 600 RR, black / gray - SW Motech
The Drybag 180 is a functional rear bag that you can easily lash to the pillion seat or a luggage rack - whether lengthwise or crosswise. The bag has a welded bottom and an integrated carrying handle on the side. The Drybag 180 can be perfectly combined with the Drybag 350 - a popular luggage duo on many motorcycle trips around the globe. Available in six sizes, SW Motech Drybags enrich every motorcycle tour and offer a versatile luggage element with simple fastening technology. Thanks to the elastic PVC material, the bags can be easily rolled and transported compressed on the motorcycle regardless of the payload. The Drybags are completely waterproof and have a high UV resistance. The new arrangement of the straps allows easy combination with other Drybag models on the pillion seat or the luggage rack. Thanks to their simple design, the new Drybags harmonize very well with the waterproof SysBag WP bags and the WP tank bags from the PRO line. Universal fit for almost all motorcycles Made of robust 500D PVC Waterproof, extremely robust luggage roll Easily compressible due to elastic texture D-rings allow the bag to be pulled tightly against the motorcycle Integrated handle on the side Waterproof roll closure and taped seams Reflective details for increased safety in road traffic Scope of delivery 1 x Drybag 180 tail bag 4 x loop straps 1 x paint protection film Mounting instructions Details Material: 500D Polyester Surface: PVC coated Color: black / gray Dimensions: 39,0 x 25,0 x 18,0 cm Total weight: approx. 0,9 kg Total volume: 18,0 l Notes Shoulder strap sold separately. Exterior pockets are splash proof and not completely waterproof.
SW-Motech Drybag 260 rear bag for Honda CBR 600 RR, black / gray - SW Motech
Weatherproof rear and carry bag in one: The lightweight drybag is available in two sizes and can be easily attached to the rear carrier, pillion seat or other drybags. Extremely durable, absolutely waterproof and high UV resistance: SW Motech drybags are made of robust 500D polyester with double-sided coating and are particularly popular with motorcycle travelers who expose their luggage to extreme loads during a tour. The practical luggage rolls are best suited to any weather conditions, are easy to clean and are easy on the wallet to boot. Waterproof bag with roll closure Outside pocket with zipper are only splash-proof Waterproof, extremely robust luggage roll Waterproof roll closure and taped seams Reflective details for greater safety in road traffic Scope of delivery 1 x Drybag 260 tail bag 4 x loop straps 1 x shoulder strap Details Material: 500D Polyester Surface: PVC coated Color: grey / black Dimensions: 50,0 x 26,0 x 26,0 cm Total weight: approx. 1,2 kg Total volume: 26,0 l
SW-Motech Drybag 260 rear bag for Honda CBR 600 RR, gray / black - SW Motech
Weatherproof rear and carry bag in one: The lightweight drybag is available in two sizes and can be easily attached to the rear carrier, pillion seat or other drybags. Extremely durable, absolutely waterproof and high UV resistance: SW Motech drybags are made of robust 500D polyester with double-sided coating and are particularly popular with motorcycle travelers who expose their luggage to extreme loads during a tour. The practical luggage rolls are best suited to any weather conditions, are easy to clean and are easy on the wallet to boot. Waterproof bag with roll closure Outside pocket with zipper are only splash-proof Waterproof, extremely robust luggage roll Waterproof roll closure and taped seams Reflective details for greater safety in road traffic Scope of delivery 1 x Drybag 260 tail bag 4 x loop straps 1 x shoulder strap Details Material: 500D Polyester Surface: PVC coated Color: grey / black Dimensions: 50,0 x 26,0 x 26,0 cm Total weight: approx. 1,2 kg Total volume: 26,0 l
SW-Motech Drybag 350 rear bag for Honda CBR 600 RR, black / gray - SW Motech
As a practical combination of rear bag and carry bag, the Drybag 350 offers both carrying comfort and 35 l of weatherproof and dustproof storage space on the motorcycle. The bag can be conveniently combined with other Drybag tail bags via clip adapters. With a tail bag in signal yellow and with reflective details, better visibility in road traffic is guaranteed. Extremely durable, absolutely waterproof and high UV resistance: SW Motech Drybags are made of robust 500D polyester with double-sided coating and are particularly popular with motorcycle travelers who subject their luggage to extreme loads during a tour. The practical luggage rolls are best suited to any weather conditions, are easy to clean and are also easy on the wallet. Universal fit for almost all motorcycles Comfortable carrying handles Easy to combine with other Drybags via clip adapter Includes 4 loop straps and 1 shoulder strap Secure and flexible four-point strap attachment Waterproof, extremely robust luggage roll Waterproof roll closure and taped seams Reflective details for increased safety on the road Made of robust 500D polyester with double-sided coating Suitable for BMW S 1000 R (13-16), K10 (K47) BMW S 1000 R (16-20), 2R10 (K47) BMW S 1000 R (16-20), 2R10r (K47) BMW S 1000 R (21-), 2R99 (K63) BMW S 1000 R (21-), 2R99r (K63) BMW S 1000 XR (15-16), K10 (K49) BMW S 1000 XR (16-19), 2X10 (K49) BMW S 1000 XR (19-), 2X99 (K69) Scope of delivery 1 x Drybag 350 tail bag 4 x loop straps 1 x shoulder strap Details Material: 500D Polyester Surface: PVC coated Color: signal yellow Dimensions: 58,0 x 28,0 x 28,0 cm Total weight: approx. 1,2 kg Total volume: 35,0 l
SW-Motech Drybag 350 rear bag for Honda CBR 600 RR, signal yellow - SW Motech
As a practical combination of rear bag and carry bag, the Drybag 350 offers both carrying comfort and 35 l of weatherproof and dustproof storage space on the motorcycle. The bag can be conveniently combined with other Drybag tail bags via clip adapters. With a tail bag in signal yellow and with reflective details, better visibility in road traffic is guaranteed. Extremely durable, absolutely waterproof and high UV resistance: SW Motech Drybags are made of robust 500D polyester with double-sided coating and are particularly popular with motorcycle travelers who subject their luggage to extreme loads during a tour. The practical luggage rolls are best suited to any weather conditions, are easy to clean and are also easy on the wallet. Universal fit for almost all motorcycles Comfortable carrying handles Easy to combine with other Drybags via clip adapter Includes 4 loop straps and 1 shoulder strap Secure and flexible four-point strap attachment Waterproof, extremely robust luggage roll Waterproof roll closure and taped seams Reflective details for increased safety on the road Made of robust 500D polyester with double-sided coating Suitable for BMW S 1000 R (13-16), K10 (K47) BMW S 1000 R (16-20), 2R10 (K47) BMW S 1000 R (16-20), 2R10r (K47) BMW S 1000 R (21-), 2R99 (K63) BMW S 1000 R (21-), 2R99r (K63) BMW S 1000 XR (15-16), K10 (K49) BMW S 1000 XR (16-19), 2X10 (K49) BMW S 1000 XR (19-), 2X99 (K69) Scope of delivery 1 x Drybag 350 tail bag 4 x loop straps 1 x shoulder strap Details Material: 500D Polyester Surface: PVC coated Color: signal yellow Dimensions: 58,0 x 28,0 x 28,0 cm Total weight: approx. 1,2 kg Total volume: 35,0 l
SW-Motech Drybag 700 rear bag for Honda CBR 600 RR, black / gray - SW Motech
The weatherproof solution for travelers with a lot of luggage: the Drybag 700 reliably protects up to 70 liters of luggage from moisture and dirt. By combining it with smaller drybags, your luggage volume can be expanded as required; it is attached using clips on the top of the bag. The Drybag 700 has two separate outer pockets for stowing small items and two MOLLE attachments to which you can attach additional pockets. The width can be easily extended using the central zipper and therefore fits both small and large motorcycles perfectly. Available in six sizes, our drybags enrich every motorcycle tour and offer a versatile luggage element with simple fastening technology. Thanks to the elastic PVC material, the bags can be rolled easily and transported compressed on the motorcycle regardless of the payload. The drybags are waterproof in the main compartment and are highly UV-resistant. The new arrangement of the straps makes it easy to combine them with other drybag models on the pillion seat or the luggage rack. Thanks to their simple design, the new drybags harmonize very well with the waterproof SysBag WP bags and the WP tank bags from the PRO line. Two welded outer pockets Two MOLLE adaptations for attaching additional bags Universal fit for almost all motorcycles Made from robust 500D PVC Waterproof, extremely robust luggage roll Easily compressible thanks to elastic texture Additional loop straps allow the bags to be pulled closer to the motorcycle Integrated handle on the side Waterproof roll closure and taped seams Reflective details for greater safety on the road Scope of delivery 1 x Drybag 700 rear bag 4 x loop straps 1 x paint protection film Fitting instructions Details Material: 500D polyester Surface: PVC-coated Color: black / grey Dimensions: 76.0 x 75.0 x 30.0 cm Total weight: approx. 1.9 kg Total volume: 70.0 l Please note Not compatible with the old Drybag versions. Outer pockets are splash-proof and not completely waterproof. Shoulder strap sold separately.
SW-Motech Drybag 700 rear bag for Honda CBR 600 RR, gray / black - SW Motech
The weatherproof solution for travelers with a lot of luggage: the Drybag 700 reliably protects up to 70 liters of luggage from moisture and dirt. By combining it with smaller drybags, your luggage volume can be expanded as required; it is attached using clips on the top of the bag. The Drybag 700 has two separate outer pockets for stowing small items and two MOLLE attachments to which you can attach additional pockets. The width can be easily extended using the central zipper and therefore fits both small and large motorcycles perfectly. Available in six sizes, our drybags enrich every motorcycle tour and offer a versatile luggage element with simple fastening technology. Thanks to the elastic PVC material, the bags can be rolled easily and transported compressed on the motorcycle regardless of the payload. The drybags are waterproof in the main compartment and are highly UV-resistant. The new arrangement of the straps makes it easy to combine them with other drybag models on the pillion seat or the luggage rack. Thanks to their simple design, the new drybags harmonize very well with the waterproof SysBag WP bags and the WP tank bags from the PRO line. Two welded outer pockets Two MOLLE adaptations for attaching additional bags Universal fit for almost all motorcycles Made from robust 500D PVC Waterproof, extremely robust luggage roll Easily compressible thanks to elastic texture Additional loop straps allow the bags to be pulled closer to the motorcycle Integrated handle on the side Waterproof roll closure and taped seams Reflective details for greater safety on the road Scope of delivery 1 x Drybag 700 rear bag 4 x loop straps 1 x paint protection film Fitting instructions Details Material: 500D polyester Surface: PVC-coated Color: black / grey Dimensions: 76.0 x 75.0 x 30.0 cm Total weight: approx. 1.9 kg Total volume: 70.0 l Please note Not compatible with the old Drybag versions. Outer pockets are splash-proof and not completely waterproof. Shoulder strap sold separately.
SW-Motech Drybag 80 rear bag for Honda CBR 600 RR, black / gray - SW Motech
The small Drybag 80 is the ultimate companion for your motorcycle adventure. It can be attached to the crash bar, the pillion seat or the luggage rack, where it reliably fulfills its purpose as a practical storage space for all areas of use. Alternatively, you can also lash the Drybag 80 onto larger models (from Drybag 350 upwards) or simply use it as a shoulder bag. Available in six sizes, SW Motech Drybags enrich every motorcycle tour and offer a versatile luggage element with simple fastening technology. Thanks to the elastic PVC material, the bags can be rolled easily and transported compressed on the motorcycle regardless of the load. The drybags are completely waterproof and highly UV-resistant. The new arrangement of the straps makes it easy to combine them with other drybag models on the pillion seat or the luggage rack. Thanks to their simple design, the new drybags harmonize very well with the waterproof SysBag WP bags and the WP tank bags from the PRO line. Welded outer pocket Universal fit for almost all motorcycles Made from robust 500D PVC Waterproof, extremely robust luggage roll Easily compressible thanks to elastic texture D-rings allow the bag to be pulled tightly onto the motorcycle Integrated handle on the side Waterproof roll closure and taped seams Reflective details for greater safety on the road For attachment to crash bars or on the pillion seat Scope of delivery 1 x Drybag 80 tail bag 2 x loop straps 1 x Paint protection film Fitting instructions Details Material: 500D polyester Surface: PVC-coated Color: black / grey Dimensions: 19.0 x 9.0 x 35.0 cm Total weight: approx. 0.6 kg Total volume: 8.0 l Notes Shoulder strap available separately.
SW-Motech Drybag 80 rear bag for Honda CBR 600 RR, black / gray - SW Motech
The small Drybag 80 is the ultimate companion for your motorcycle adventure. It can be attached to the crash bar, the pillion seat or the luggage rack, where it reliably fulfills its purpose as a practical storage space for all areas of use. Alternatively, you can also lash the Drybag 80 onto larger models (from Drybag 350 upwards) or simply use it as a shoulder bag. Available in six sizes, SW Motech Drybags enrich every motorcycle tour and offer a versatile luggage element with simple fastening technology. Thanks to the elastic PVC material, the bags can be rolled easily and transported compressed on the motorcycle regardless of the load. The drybags are completely waterproof and highly UV-resistant. The new arrangement of the straps makes it easy to combine them with other drybag models on the pillion seat or the luggage rack. Thanks to their simple design, the new drybags harmonize very well with the waterproof SysBag WP bags and the WP tank bags from the PRO line. Welded outer pocket Universal fit for almost all motorcycles Made from robust 500D PVC Waterproof, extremely robust luggage roll Easily compressible thanks to elastic texture D-rings allow the bag to be pulled tightly onto the motorcycle Integrated handle on the side Waterproof roll closure and taped seams Reflective details for greater safety on the road For attachment to crash bars or on the pillion seat Scope of delivery 1 x Drybag 80 tail bag 2 x loop straps 1 x Paint protection film Fitting instructions Details Material: 500D polyester Surface: PVC-coated Color: black / grey Dimensions: 19.0 x 9.0 x 35.0 cm Total weight: approx. 0.6 kg Total volume: 8.0 l Notes Shoulder strap available separately.
SW-Motech ION L Motorcycle Tail Bag Honda CBR 600 RR (03-06), PC37
With 50 l volume, the ION L rear bag offers enough storage space for longer tours. Compression straps prevent fluttering at low load and allow, if necessary, the fixation of additional luggage on the bag. Two exterior side pockets give quick access to essentials. Robust clamp closures and loop straps allow quick lashing and, with its flexible shape and anti-slip bottom, give the bag a secure hold on the pillion seat or rear of the vehicle. The carrying handle is another plus point of the spacious ION L tail bag. ION series tail bags - available in S, M and L versionsThree sizes, elegant looks, attractive price: the ION series tail bags are available in three shapes and can be lashed to almost any motorcycle rear. Made of black 600D polyester with elements of soft vinyl, the tail bags combine an attractive design with features suitable for touring, such as optimized storage space, non-slip underside, lockable main compartment zipper and a waterproof inner pocket. The reflective textile piping is barely noticeable in daylight, but increases visibility many times over in the dark. Optimized for pillion seat or vehicle rear of many models 50 l storage space with low weight Robust clamp fasteners for reliable 4-point attachment with loop straps Compression straps with clip adapters prevent fluttering and allow lashing of additional luggage Easy access: 2 external side pockets and mesh pocket inside the lid Large main compartment for individual loading Practical carrying handle Anti-slip underside for best grip Attractive look due to the combination of polyester textile fabric with black soft vinyl Reflective details for more safety in road traffic Discreet design elements: embroidered SW-MOTECH logo and bull in silver gray Durable, especially UV-resistant 600D polyester with water-repellent inner coating Waterproof inner bag included Scope of delivery 1 x ION L tail bag 1 x waterproof inner bag 4 x loop straps 2 x compression straps 2 x straps to attach to license plate holder 1 x paint protection film Details Material: 600D Polyester / Soft-Vinyl Color: black / black Dimensions: 50,0 x 70,0 x 30,0 cm Total weight: approx. 1,3 kg Total volume: 50,0 l
SW-Motech ION M Motorcycle Tail Bag Honda CBR 600 RR (03-06), PC37
The ION M tail bag can be fixed to almost any motorcycle rear thanks to optimized fit and the curved and anti-slip bottom. Particularly practical: the tail bag has two external pockets and a mesh compartment inside the lid. The storage space of 26 l, which is easily accessible via the large lid, can be increased to 36 l by two side extensions if required. The stiffened sides prevent the bag from flapping - even during sporty riding. An integrated carrying handle and the included shoulder strap make the ION M rear bag a comfortable travel bag at the same time. Rear bags of the ION series - available as S, M and L variantsThree sizes, elegant look, attractive price: The rear bags of the ION series are available in three shapes and can be lashed to almost any motorcycle rear. Made of black 600D polyester with elements of soft vinyl, the tail bags combine an attractive design with features suitable for touring, such as optimized storage space, non-slip underside, lockable main compartment zipper and a waterproof inner pocket. The reflective textile piping is barely noticeable in daylight, but increases visibility many times over in the dark. Optimized for pillion seat or vehicle rear of many models Volume expansion from 26 to 36 l via two side zippers, width varies from 44 to 54 cm 4 D-rings to fix the shoulder strap or other luggage No flapping thanks to stiffened sides Easy access: 2 outside pockets and mesh pocket inside the lid Large main compartment for individual loading Practical carrying handle Anti-slip underside for best grip Attractive look due to the combination of polyester textile fabric with black soft vinyl Reflective details for more safety in road traffic Discreet design elements: embroidered SW-MOTECH logo and bull in silver gray Durable, especially UV-resistant 600D polyester with water-repellent inner coating Waterproof inner bag included Scope of delivery 1 x ION M tail bag 1 x waterproof inner bag 4 x loop straps long (67 cm) 4 x loop straps short (17 cm) 2 x straps to attach to license plate holder 1 x shoulder strap 1 x paint protection foil Details Material: 600D Polyester / Soft-Vinyl Color: black / black Dimensions: 30,0 x 44,0 x 30,0 cm Total weight: approx. 1,5 kg Total volume: 26,0-36,0 l
SW-Motech ION S Motorcycle Tail Bag Honda CBR 600 RR (03-06), PC37
Ideal for small and sporty bikes: The volume of the ION S rear bag can be expanded via a zipper from 7 to 15 l and thus offers enough storage space for drink, change of clothes, high-visibility vest and other small items that you need on a day trip or short trip. The compact bag can be lashed to riveted D-rings with included loop straps. In addition, two Velcro tabs and a slot on the bottom allow for quick and secure attachment to the seat or luggage rack. The stiffened sides, the padded lid and straps to tighten the volume expansion guarantee a firm shape even with sporty driving. Particularly quickly at hand are things that are stowed in the outer pocket or in the mesh compartment inside the lid. A carrying handle makes the ION tail bag a practical travel companion even off the road. Rear bags of the ION series - available as S, M and L variantsThree sizes, elegant looks, attractive price: the ION series tail bags are available in three shapes and can be lashed to almost any motorcycle tail. Made of black 600D polyester with elements of soft vinyl, the tail bags combine an attractive design with features suitable for touring, such as optimized storage space, non-slip underside, lockable main compartment zipper and a waterproof inner pocket. The reflective textile piping is hardly noticeable in daylight, but increases visibility many times over in the dark. Compact rear bag, ideal for small and sporty bikes Volume expansion from 7 to 15 l, height varies between 10 and 18 cm D-rings for reliable 4-point attachment with loop straps Two integrated Velcro straps plus insert for fastening under the seat or luggage rack Easy access: outer pocket and mesh pocket inside the lid Large main compartment for individual loading Practical carrying handle Anti-slip underside for best grip Attractive look due to the combination of polyester textile fabric with black soft vinyl Reflective details for more safety in road traffic Discreet design elements: embroidered SW-MOTECH logo and bull in silver gray Durable, especially UV-resistant 600D polyester with water-repellent inner coating Waterproof inner bag included Scope of delivery 1 x ION S tail bag 1 x waterproof inner bag 1 x strap set for tail bag (20 mm wide, 2x 37 cm long, 2x 70 cm long) 1 x paint protection film Details Material: 600D Polyester / Soft-Vinyl Color: black / black Dimensions: 33,0 x 29,0 x 10,0 cm Total weight: approx. 0,6 kg Total volume: 7,0-15,0 l
SW-Motech PRO Cargobag rear bag Honda CBR 600 RR (03-06), PC37
With a volume of 50 liters, the Cargobag is one of the most versatile bags from the PRO rear bag series. The soft bag adapts very well to the most varied of rear shapes and offers numerous storage space solutions for transport on the motorcycle. Large outer pockets on both sides, which can be compressed with Velcro straps if necessary, make the cargo bag even more adaptable. A large mesh pocket in the lid offers space for small objects and bracing surfaces with straps on the outside to hold additional items of luggage. < span class = "seg addText"> The tail bag from the PRO series is made of indestructible 1680 D ballistic nylon, which was originally designed for military use. In addition, it impresses with its high-quality workmanship and well thought-out features: reflective attachments ensure better visibility and a MOLLE attachment on the top enables additional pockets to be attached. Universal fit for almost all motorcycles Reliable 4-point lashing strap attachment 2 outside pockets with zippers 2 side bracing surfaces for additional luggage Storage space for a helmet Zippered mesh compartment in the lid Covered zippers Underside made of non-slip material Made of robust and particularly UV-resistant 1680D ballistic nylon with a water-repellent inner coating Reflective details for better visibility Zipper management: rubber loops prevent the zipper from fluttering MOLLE attachment made of sturdy Hypalon material on the top for attaching additional bags. Weather protection through included waterproof inner pocket Robust handle Scope of delivery 1 x PRO Cargobag tail bag 1 x waterproof inner pocket 4 x loop straps 2 x lashing eyes for attachment to the license plate holder 1 x paint protection film Installation instructions Details Material: 1680D Ballistic Nylon Color: black / anthracite Dimensions: 50.0 x 70.0 x 33.0 cm Total weight: 1.7 kg Total volume: 50.0 l
SW-Motech PRO Daypack tank bag HONDA CBR 600 RR (03-12)
The universal fit makes the tank bag PRO Daypack - like the PRO Micro - a real all-rounder. However, the larger daypack, which offers 5 to 8 liters of storage space, can come up with some extras. The PRO tank bags offer elegant and timeless design in combination with durable materials and well thought-out product features: Ballistic nylon protects luggage from impact, wind and weather. The top made of laminated EVA material gives the bags a distinctive shape and, in conjunction with a MOLLE attachment, ensures a secure hold for smartphone and tablet holders.The guide rail of the top ring, which is already attached at the factory, allows a much simplified adjustment of the tank bag to the shape of the tank and the ergonomic needs of the rider. Only the PRO tank bags offer this flexibility. To match, SW-MOTECH offers the patented PRO tank rings made of fiberglass-reinforced plastic. They are manufactured to match the motorcycle model (You can find these in the vehicle category and under the article under accessories)The robust PRO tank ring with magnetic guide aid secures the PRO tank bags with a mechanical QUICK-LOCK latch. This allows the tank bags to be attached or removed with just one movement. Volume expansion by zipper from 5 to 8 liters The patented PRO tank ring gives PRO tank bags a secure hold Magnetic guide in PRO tank ring for easy attachment Pre-mounted guide rail of the top ring for ergonomic adjustment of the tank bag Top and bottom of tank bag made of laminated and dimensionally stable EVA plastic Made of robust and especially UV-resistant 1680D Ballistic Nylon with water-repellent inner coating MOLLE attachment made of sturdy Hypalon material on the top for smartphone and tablet holder Reflective details for better visibility Mesh pockets inside Weather protection with included rain cover Robust carrying handle Cable grommet on the front and back side Can be used with cable lock or anti-theft device Scope of delivery 1 x PRO Daypack tank bag 1 x PRO top ring 1 x rain cover PRO Daypack Mounting instructions Mounting material Details Material: 1680D Ballistic Nylon Color: black / gray Dimensions: 29,5 x 22,5 x 12,5 cm Total weight: 1 ,0 kg Total volume: 5 ,0-8,0 l Note For mounting on the tank, the matching PRO tank ring is required. (You can find this in the vehicle category and under the article under accessories) The tank bags of the PRO series can not be combined with the EVO tank rings.
SW-Motech PRO Micro tank bag HONDA CBR 600 RR (03-12)
Discreet and straightforward: The PRO Micro fits on almost any tank and safely transports small necessities such as vehicle documents and valuables. Like all PRO tank bags, the Micro sits on an EVA plastic base that guarantees high dimensional stability. The volume of the tank bag can be expanded with the help of a zipper. The PRO tank bags offer elegant and timeless design combined with durable materials and well thought-out product features: Ballistic nylon protects the luggage from shocks, wind and weather. The top made of laminated EVA material gives the bags a distinctive shape and, in conjunction with a MOLLE attachment, ensures a secure hold for smartphone and tablet holders.The guide rail of the top ring, which is already attached at the factory, allows a much simplified adjustment of the tank bag to the shape of the tank and the ergonomic needs of the rider. Only the PRO tank bags offer this flexibility. To match, SW-MOTECH offers the patented PRO tank rings made of fiberglass-reinforced plastic. They are manufactured to match the motorcycle model. (You can find these in the vehicle category and under the article under accessories)The robust PRO tank ring with magnetic guide aid secures the PRO tank bags with a mechanical QUICK-LOCK snap-in lock. This allows the tank bags to be attached or removed with just one movement. Volume expansion by zipper from 3 to 5 liters The patented PRO tank ring gives PRO tank bags a secure hold Magnetic guide in PRO tank ring for easy attachment Pre-mounted guide rail of the top ring for ergonomic adjustment of the tank bag Top and bottom of tank bag made of laminated and dimensionally stable EVA plastic Made of robust and especially UV-resistant 1680D Ballistic Nylon with water-repellent inner coating MOLLE attachment made of sturdy Hypalon material on the top for smartphone and tablet holder Reflective details for better visibility Mesh pockets inside Weather protection with included rain cover Robust carrying handle Cable grommet on the front and back side Can be used with cable lock or anti-theft device Scope of delivery 1 x PRO Micro tank bag 1 x PRO top ring 1 x PRO Micro rain cover Mounting instructions Mounting material Details Material: 1680D Ballistic Nylon Color: black / gray Dimensions: 27,0 x 20,5 x 11,0 cm Total weight: 0 ,8 kg Total volume: 3 ,0-5,0 l Note For mounting on the tank, the matching PRO tank ring is required. (You can find this in the vehicle category and under the article under accessories) The tank bags of the PRO series can not be combined with the EVO tank rings.
SW-Motech PRO Rearbag tail bag Honda CBR 600 RR (03-06), PC37
p > With its universal fit, the PRO rearbag is just as suitable for use on road bikes as it is for the pillion seat of a travel enduro. With a volume of 22 liters, which can be expanded to 34 liters, the bag offers enough space for luggage on the pillion seat of your motorcycle. You can even stow your helmet in the rear bag. The slightly curved underbody adapts to the seat and is equipped with non-slip material. The top of the PRO Rearbag tail bag made of dimensionally stable and laminated EVA material provides additional pockets with a secure hold on the sewn-on MOLLE attachment. The tail bag from the PRO series is made of indestructible 1680 D ballistic nylon, which was originally designed for military purposes. In addition, it impresses with high-quality workmanship and well thought-out features: reflective attachments ensure better visibility, robust lashing hooks secure the bags quickly and easily at the rear and a MOLLE attachment on the top enables additional bags to be attached. The patented lashing hooks allow flexible attachment of the PRO tail bags. The straps are hooked in and tensioned in one step. To remove the bag, the strap is relaxed with a handle and removed from the lashing eyelet by pulling on the drawstring. The excess length of the belt can be secured with a Velcro fastener on the belt. The bag can be used on different motorcycles and the strap length can be adjusted accordingly. Universal fit for almost all motorcycles Top of the bag made of laminated and dimensionally stable EVA material Zippered mesh compartment in the lid Additional storage space thanks to two outside pockets with covered zippers Volume expansion in the lid area from 22 to 34 liters Storage space for a helmet Underside made of non-slip material Robust lashing eyes for secure fastening of the bag at 4 points and for lashing additional bags Made of tough and particularly UV-resistant 1680D ballistic nylon with a water-repellent inner coating Reflective details for better visibility Zipper management: rubber loops prevent the zipper from fluttering MOLLE attachment made of sturdy Hypalon material on the top for attaching additional pockets. Easy and quick attachment of the bag to the motorcycle using loop straps with patented lashing hooks. Weather protection through included waterproof inner pocket Sturdy handle Scope of delivery 1 x PRO Rearbag tail bag 1 x waterproof inner pocket 4 x loop straps with lashing hooks 2 x lashing eyes for attachment to the license plate holder 1 x paint protection film Installation instructions Details Material: 1680D Ballistic Nylon Color: black / anthracite Dimensions: 40.0 x 43.0 x 25.0 cm Total weight: 1.8 kg Total volume: 22.0-34.0 l
SW-Motech PRO Roadpack tail bag Honda CBR 600 RR (03-06), PC37
The PRO Roadpack is a compact bag that fits perfectly on the rear of small and sporty motorcycles. The volume of the small tail bag can be expanded from 8 to 14 liters via a zipper. An inside pocket with zipper in the lid offers storage space for keys, wallet and other small things. In addition to the loop straps supplied, two Velcro straps and a slot on the underside enable quick and secure attachment to the bench or luggage rack . The stiffened sides, the molded cover made of EVA material and straps for tightening the volume increase guarantee a firm shape even with a sporty driving style. The tail bag from the PRO series is made of indestructible 1680 D ballistic nylon, which was originally designed for military purposes. In addition, it impresses with high-quality workmanship and well thought-out features: reflective attachments ensure better visibility, robust lashing hooks secure the bags quickly and easily at the rear and a MOLLE attachment on the top enables additional bags to be attached. The patented lashing hooks allow flexible attachment of the PRO tail bags. The straps are hooked in and tensioned in one step. To remove the bag, the strap is relaxed with a handle and removed from the lashing eyelet by pulling on the drawstring. The excess length of the belt can be secured with a Velcro fastener on the belt. The bag can be used on different motorcycles and the strap length can be adjusted accordingly. < br /> Universal fit for almost all motorcycles Top of the bag made of laminated and dimensionally stable EVA material Zippered mesh compartment in the lid Volume expansion in the base area from 8 to 14 liters Underside made of non-slip material Robust lashing eyes for secure fastening of the bag at 4 points and for lashing additional bags Made of tough and particularly UV-resistant 1680D ballistic nylon with a water-repellent inner coating Reflective details for better visibility Zipper management: rubber loops prevent the zipper from fluttering MOLLE attachment made of sturdy Hypalon material on the top for attaching additional pockets. Easy and quick attachment of the bag to the motorcycle using loop straps with patented lashing hooks. Weather protection through included waterproof inner pocket Sturdy handle Scope of delivery 1 x PRO Roadpack rear bag 1 x waterproof inner pocket 4 x loop straps with lashing hooks 1 x paint protection film Installation instructions Details Material: 1680D Ballistic Nylon Color: black / anthracite Dimensions: 36.0 x 28.0 x 15.0 cm Total weight: 0.9 kg Total volume: 8.0-14.0 l
SW-Motech PRO Sport tank bag HONDA CBR 600 RR (03-12)
With its striking design and flat fit, the PRO Sport is aimed primarily at riders of sporty motorcycles. With 12-17 liters, the tank bag has plenty of storage space. For navigation, smartphones can be securely attached to the MOLLE attachment on the lid with the T-Lock holder. The PRO tank bags offer elegant and timeless design combined with durable materials and well thought-out product features: Ballistic nylon protects luggage from impact, wind and weather. The top made of laminated EVA material gives the bags a distinctive shape and, in conjunction with a MOLLE attachment, ensures a secure hold for smartphone and tablet holders.The guide rail of the top ring, which is already attached at the factory, allows a much simplified adjustment of the tank bag to the shape of the tank and the ergonomic needs of the rider. Only the PRO tank bags offer this flexibility. To match, SW-MOTECH offers the patented PRO tank rings made of fiberglass-reinforced plastic. They are manufactured to match the motorcycle model (You can find this in the vehicle category and under the article under accessories)The robust PRO tank ring with magnetic guide aid secures the PRO tank bags with a mechanical QUICK-LOCK latch. This allows the tank bags to be attached or removed with just one movement. Volume expansion by zipper from 12 to 17 liters 2 outside pockets The patented PRO tank ring gives PRO tank bags a secure hold Magnetic guide in PRO tank ring for easy attachment Pre-mounted guide rail of the top ring for ergonomic adjustment of the tank bag Top and bottom of tank bag made of laminated and dimensionally stable EVA plastic Made of robust and especially UV-resistant 1680D Ballistic Nylon with water-repellent inner coating MOLLE attachment made of sturdy Hypalon material on the top for smartphone and tablet holder Reflective details for better visibility Mesh pockets inside Weather protection with included rain cover Robust carrying handle Cable grommet on the front and back side Can be used with cable lock or anti-theft device Scope of delivery 1 x PRO Sport tank bag 1 x PRO top ring 1 x PRO Sport rain cover Mounting instructions Mounting material Details Material: 1680D Ballistic Nylon Color: black / gray Dimensions: 39,5 x 31,5 x 16,5 cm Total weight: 1 ,4 kg Total volume: 12,0-17,0 l Note For mounting on the tank, the matching PRO tank ring is required. (You can find this in the vehicle category and under the article under accessories) The tank bags of the PRO series can not be combined with the EVO tank rings.
SW-Motech PRO tank ring HONDA CBR 600 RR (03-06)
The PRO tank ring perfectly combines the innovative strength of two German companies: The QUICK-LOCK latching mechanism of the SW-MOTECH tank rings, which has been tried and tested for years, is now even easier to operate thanks to the magnetic guide aid of the Fidlock technology. The positioning of the top ring has been significantly improved: the sliding top ring is already pre-mounted on the tank bag with a guide rail and the tank bag does not have to be drilled into.This means that the upper ring can be individually aligned on the guide rail on the underside of the tank bag. Once the right position has been found, the upper ring is screwed tight. When changing to a different motorcycle, the position of the upper ring can be adjusted accordingly.The magnetic guide aid, developed by Fidlock, complements SW-MOTECH's already sophisticated mechanical QUICK-LOCK snap-on closure: the magnets guide the top ring into the right position on the tank ring and the closure locks firmly into place. Thus, the force of the magnets supports the placement of the tank bag. Attach the tank bag with a flick of the wrist and ride off - the luggage sits securely and it's fun, too.The mechanical latching mechanism secures the tank bag and the magnets bring the two parts of the ring together. The robust fiberglass-reinforced plastic with its high-precision latching geometry is responsible for keeping the tank bag firmly in place in all road conditions.The patented PRO tank ring is matched to the tank filler neck of the motorcycle model. This ensures the best possible positioning on the tank. Model-specific adapter ring for best fit and individual solutions Easy mounting on the tank filler neck Magnetic guide in PRO tank ring for easy attachment Quick release via pull strap allows removal of the PRO tank bag in one easy step The patented PRO tank ring gives PRO tank bags a secure hold Easy refueling, tank cap can be opened as usual Made of glass fiber reinforced polyamide Paint-friendly solution: the tank bag does not rest on the tank Scope of delivery 1 x PRO tank ring 2 x mounting ring Mounting instructions Mounting material Details Material: fiberglass reinforced plastic / aluminum Color: black Note The tank rings of the PRO series are not combinable with the EVO tank bags. Two mounting rings are included in the scope of delivery: A mounting ring for tank cap rings with M4 thread and a mounting ring for tank cap rings with M6 thread
