alpha Technik Tieferlegungssatz 40mm für Kawasaki Ninja 400 und Ninja 500, ab Modelljahr 2018-
alpha Technik Tieferlegungssatz 40mm für Kawasaki Ninja 400 und Ninja 500, ab Modelljahr 2018- alpha Technik Tieferlegungssatz für Kawasaki Ninja 400 / Ninja 400 Performance / Ninja 400 KRT Edition, Fzg.-Typ: EX400G, EG-BE-Nr.: e1*168/2013*00067*, Modelljahr 2018-, und Fzg.-Typ: EX400L, EG-BE-Nr.: e1*168/2013*00308*, ab Modelljahr 2023-. Ninja 500 / Ninja 500 SE, Fzg.-Typ: EX500G, EG-BE-Nr.: e1*168/2013*00366*, ab Modelljahr 2024-. Sitzhöhenreduzierung ca. 40mm, Lieferung erfolgt mit allen erforderlichen Umbauteilen, mit ABE. Produktkennzeichnung: Tieferlegungen Hinweis: Achtung: Der Einbau darf nur durch eine Fachwerkstatt erfolgen. Geänderte Fahrzeugteile: geänderte Positionierung der Gabelrohre in den Gabelbrücken, geänderte Umlenkhebel, Seitenständer kürzen Produkt Typ: Tieferlegungssatz Kawasaki Ninja 400, EX400G Lieferumfang: ABE und alle notwendigen Umbauteile
ARROW Auspuff INDY RACE EVO Aluminium schwarz für Kawasaki Z500, Ninja 500 Modelljahr 2024-
ARROW Auspuff INDY RACE EVO Aluminium schwarz für Kawasaki Z500, Ninja 500 Modelljahr 2024- ARROW INDY RACE EVO Endschalldämpfer mit schwarzer Aluminium-Hülle und Carbon-Endkappe, inkl. fest verschweisstem Zwischenrohr, mit Straßenzulassung gemäß EU-Verordnung für Kawasaki Z500, Typ ER500E, Modelljahr 2024- Ninja 500, Typ EX500G, Modelljahr 2024- Anbau an Original-Krümmer Produktkennzeichnung: Abgastechnik ARROW Produkt Typ: ARROW INDY RACE EVO schwarz Kawasaki Z500 Ninja Lieferumfang: Endschalldämpfer inkl. Anbaumaterial
ARROW Auspuff INDY RACE EVO Titan für Kawasaki Z500, Ninja 500 Modelljahr 2024-
ARROW Auspuff INDY RACE EVO Titan für Kawasaki Z500, Ninja 500 Modelljahr 2024- ARROW INDY RACE EVO Endschalldämpfer mit Titan-Hülle und Carbon-Endkappe, inkl. fest verschweisstem Zwischenrohr, mit Straßenzulassung gemäß EU-Verordnung für Kawasaki Z500, Typ ER500E, Modelljahr 2024- Ninja 500, Typ EX500G, Modelljahr 2024- Anbau an Original-Krümmer Produktkennzeichnung: Abgastechnik ARROW Produkt Typ: ARROW INDY RACE EVO Titan Kawasaki Z500 Ninja 500 Lieferumfang: Endschalldämpfer inkl. Anbaumaterial
ARROW Auspuff PRO RACE DARK NiChrom schwarz für Kawasaki Z500, Ninja 500 Modelljahr 2024-
ARROW Auspuff PRO RACE DARK NiChrom schwarz für Kawasaki Z500, Ninja 500 Modelljahr 2024- ARROW PRO-RACE DARK Endschalldämpfer in Megafon-Form mit schwarzer NiChrome-Hülle und Edelstahl-Endkappe. mit Straßenzulassung, für Kawasaki Z500, Typ ER500E, Modelljahr 2024- Ninja 500, Typ EX500G, Modelljahr 2024- Anbau an Original-Krümmer Produktkennzeichnung: Abgastechnik ARROW Produkt Typ: ARROW PRO-RACE Kawasaki Z500 Ninja 500
ARROW Auspuff PRO RACE NiChrome für Kawasaki Z500, Ninja 500 Modelljahr 2024-
ARROW Auspuff PRO RACE NiChrome für Kawasaki Z500, Ninja 500 Modelljahr 2024- ARROW PRO-RACE Endschalldämpfer in Megafon-Form mit NiChrome-Hülle und Edelstahl-Endkappe. mit Straßenzulassung, für Kawasaki Z500, Typ ER500E, Modelljahr 2024- Ninja 500, Typ EX500G, Modelljahr 2024- Anbau an Original-Krümmer Produktkennzeichnung: Abgastechnik ARROW Produkt Typ: ARROW PRO-RACE Kawasaki Z500 Ninja 500
ARROW Racing Krümmer Edelstahl für Kawasaki Ninja 400 und Z400 2023-, Ninja 500 und Ninja 500 2024-
ARROW Racing Krümmer Edelstahl für Kawasaki Ninja 400 und Z400 2023-, Ninja 500 und Ninja 500 2024- ARROW Racing Krümmer aus Edelstahl, ohne Homologation für Kawasaki Ninja 400, Typ EX400L, ab Modelljahr 2023- Z 400, Typ ER400F, ab Modelljahr 2023- Ninja 500, Typ EX500G, ab Modelljahr 2024- Z500, Typ ER500E, ab Modelljahr 2024- Zur Verwendung mit ARROW-Endschalldämpfer AR- 71950 / AR-71874 / AR-71967 Produktkennzeichnung: Abgastechnik ARROW Hinweis: Zur Verwendung mit ARROW-Endschalldämpfer AR- 71950 / AR-71874/AR-71957 Produkt Typ: ARROW Racing Krümmer Edelstahl Kawasaki Ninja 400
HIGHSIDER pro handlebar adapter For various Kawasaki models (pair)
HIGHSIDER M8 mounting kit for various Kawasaki motorcycles This special mounting kit makes it possible to mount the popular HIGHSIDER handlebar end weights, handlebar end mirrors or lever guards on the original handlebars of Kawasaki motorcycles. The 8 x 1.25 threaded sleeves with M5 internal thread are screwed into the existing thread in the handlebars using a suitable slotted screwdriver. M5 x 30 mm screws are supplied to match the threaded sleeve with M5 internal thread. The M6 screws used for the HIGHSIDER handlebar end weights, handlebar end mirrors and lever protectors are replaced by the M5 screws The HIGHSIDER handlebar accessories can now be fitted to the Kawasaki handlebars. If necessary, the washers included in the set can be used to create a sufficiently large gap between the grip and the attachment. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions: Threaded sleeves Outside: M8 x 1.25 Inside: M5 x 30 mm Washer: Outer diameter: 15 mm Inner diameter: 5.3 mm Adapter screw: M5 x 30 mm Spacer washer: Diameter: 28 mm Thickness: 8 mm Hole: 5.3 mm Scope of delivery: 2 x threaded sleeves 2 x washers 2 x M5 screws 2 x spacers Note: Not suitable for handlebar end mirrors with LED indicators
HIGHSIDER pro license plate holder Akron-RS Pro Kawasaki
HIGHSIDER AKRON-RS PRO license plate holder incl. license plate lightThe design of the HIGHSIDER AKRON-RS PRO license plate holder perfectly matches the lines of your bike.The model-specific holder of the HIGHSIDER AKRON-RS PRO allows mounting on the original mounting points of your bike and thus replacement without further drilling or cutting.To prevent damage to cables, all sharp-edged feed-throughs are protected by a rubber membrane grommet.The license plate is made of sheet steel and is 2 mm thick. It is precisely cut to size using a laser. After edging, it is given a weather-resistant black powder coating.This ensures an optimum fit and durability.The stepless adjustment option allows you to position the plate as required without drilling. There is an additional locking screw to hold the plate in this position.The width of the blinker brackets on the HIGHSIDER AKRON-RS PRO can be adjusted, making them suitable for all types of accessory indicators. This adjustment option allows you to adapt the position of your indicators to a wide variety of license plates. The 8 mm holes are slotted to the side to allow the indicators to be fitted without disconnecting them from the wiring harness.You can also individually adjust the position of the rear reflector using a slider. This makes it easy to adapt to the different versions of EU license plates.Two rubber washers are included to securely screw the license plate and reduce vibrations. Another rubber buffer supports the license plate on its underside.This PRO version of the HIGHSIDER AKRON-RS includes the very small HIGHSIDER license plate light milled from high-quality aluminium with mounting plate and support arm. The bracket is adjustable in height and designed to allow mounting in the legally prescribed position.Details:- model-specific bracket- infinitely adjustable blinker holder- slotted blinker holder for simple mounting without cable separation- infinitely adjustable reflector, E-approved- suitable for European license plates- Infinitely adjustable angle of inclination- Additional screw for optimum positional security- Simple fixing without additional work steps (e.g. drilling) - Easy to install without the need for additional toolsE.g. drilling)- easy mounting of the license plate thanks to elongated holes- license plate light incl. holder included in delivery Bracket included in scope of delivery- license plate light, E-approved- infinitely adjustable license plate light- many different options for mounting the license plate lightThe HIGHSIDER AKRON-RS PRO is supplied as standard:- Model-specific bracket with mounting parts- HIGHSIDER AKRON-RS license plate mounting plate- Adjustable blinker brackets- E-approved reflector with adjustable bracket- E-approved license plate light- Installation instructionsNotes:- If side reflectors are fitted to your original license plate holder, these must be refitted in a suitable position or replaced with new ones.- Special blinker holders are optionally available for the original indicators.Tip:If you have not found a model-specific license plate holder for your vehicle, you are sure to find what you are looking for in the universal license plate holders from HIGHSIDER, which are available in many different designs.
HIGHSIDER pro turn signal adapter black For original turn signals, For Kawasaki, For license plate holder (pair)
With this black aluminum blinker adapter, the original indicators can be used on our HIGHSIDER or HIGHSIDER pro license plate holders. Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike to your liking. Scope of delivery: 1 pair
Large clear windshield for Kawasaki Ninja 500 SE Original
Specially designed large clear windshield for better wind protection and improved appearance. This windshield is approximately 60 mm higher and 70 mm wider (35 + 35 mm) than the original windshield for more comfort.
Large tinted windshield for Kawasaki Ninja 500 SE Original
Specially designed large windshield in smoke gray for better wind protection and improved appearance. This windshield is approximately 60 mm higher and 70 mm wider (35 + 35 mm) than the original windshield for more comfort.
License plate holder for Kawasaki Z 500 / Ninja 500 / Ninja 500 SE (24-)
alpha Technik License plate holder for KawasakiZ500, type ER500E, from model year 2024-,Ninja 500 / Ninja 500 SE, type EX500G, from model year 2024-.With reflector and license plate illumination.For use with original indicators. Please order adapter for accessory indicators separately under "Accessories". Features:- Stainless steel and aluminium - high-precision laser cut, rust-free & resistant.- Lightweight & yet stable.- Elegantly finished with black cathodic dip coating or black anodized coating.- Infinitely adjustable tilt Infinitely adjustable inclination- All necessary fastening materials for vehicle mounting available.- License plate light and reflector with E-mark.- Adjustable width of turn signal spacing, thus compliant with directives.- Made in Germany - All parts made in Germany. The short license plate holder from alpha Technik impresses with its sporty design, functionality and simple installation (detailed installation instructions included). With a width of approx. 180 mm, the back plate is ideal for the new, narrow license plates.
License plate holder for Kawasaki Z 500 / Ninja 500 / Ninja 500 SE (24-)
alpha Technik License plate holder for KawasakiZ500, type ER500E, from model year 2024-,Ninja 500 / Ninja 500 SE, type EX500G, from model year 2024-.With reflector and license plate illumination.For use with original indicators. Please order adapter for accessory indicators separately under "Accessories". Features:- Stainless steel and aluminium - high-precision laser cut, rust-free & resistant.- Lightweight & yet stable.- Elegantly finished with black cathodic dip coating or black anodized coating.- Infinitely adjustable tilt Infinitely adjustable inclination- All necessary fastening materials for vehicle mounting available.- License plate light and reflector with E-mark.- Adjustable width of turn signal spacing, thus compliant with directives.- Made in Germany - All parts made in Germany. The short license plate holder from alpha Technik impresses with its sporty design, functionality and simple installation (detailed installation instructions included). With a width of approx. 180 mm, the back plate is ideal for the new, narrow license plates.
Passenger seat cover Lime Green (777) for Kawasaki Ninja 500 SE / Z 500 Original
Stylish seat cover that emphasizes the sporty appearance of the bike. Including rubber pad. Available in almost all factory standard colors. Replaces the passenger seat of the Ninja 500 and Z500.
Passenger seat cover Metallic Carbon Gray (51A) for Kawasaki Ninja 500 SE / Z 500 Original
Stylish seat cover that emphasizes the sporty appearance of the bike. Including rubber pad. Available in almost all factory standard colors. Replaces the passenger seat of the Ninja 500 and Z500.
Passenger seat cover Metallic Flat Spark Black (739) for Kawasaki Ninja 500 SE / Z 500 Original
Stylish seat cover that emphasizes the sporty appearance of the bike. Including rubber pad. Available in almost all factory standard colors. Replaces the passenger seat of the Ninja 500 and Z500.
Passenger seat cover Metallic Matte Graphene Steel Gray (68P) for Kawasaki Ninja 500 SE / Z 500
Stylish seat cover that emphasizes the sporty appearance of the bike. Replaces the passenger seat of the Ninja 500 and Z 500.
Passenger seat cover Metallic Spark Black (660) for Kawasaki Ninja 500 SE / Z 500 Original
Stylish seat cover that emphasizes the sporty appearance of the bike. Including rubber pad. Available in almost all factory standard colors. Replaces the passenger seat of the Ninja 500 and Z500.
Pillion seat cover Passion Red (234) for Kawasaki Ninja 500 SE / Z 500
Stylish seat cover that emphasizes the sporty appearance of the bike. Replaces the passenger seat of the Ninja 500 and Z 500.
Radiator guard for Kawasaki Ninja /Z 400 and Ninja /Z 500 Original Kawasaki
The aluminum radiator grille underlines the design and improves the protection of the radiator.
SHAD Tank Click System
Das Click-System von SHAD ist die neueste Entwicklung bei den Befestigungssystemen für Tankrucksäcke. Es ist nicht nur einfach zu bedienen und leicht in das Motorrad zu integrieren, sondern verfügt auch über einen Druckknopf, mit dem der Tankrucksack schnell entriegelt werden kann, indem man ihn einfach nach unten drückt.
SW-Motech PRO Fuel Tank Ring for Kawasaki Ninja 500 SE
The PRO tank ring perfectly combines the innovative strength of two German companies: The QUICK-LOCK locking mechanism used in SW-MOTECH tank rings—which has proven itself over many years—is now even easier to operate thanks to the magnetic guide provided by Fidlock technology. The positioning of the upper ring has been significantly improved: The adjustable upper ring comes pre-mounted on a guide rail on the tank bag, eliminating the need to drill into the tank bag. This allows the top ring to be individually aligned on the guide rail on the underside of the tank bag. Once the correct position is found, the top ring is securely screwed in place. When switching to a different motorcycle, the position of the top ring can be adjusted accordingly.The magnetic guide, developed by Fidlock, complements SW-MOTECH’s already sophisticated mechanical QUICK-LOCK latch: The magnets guide the top ring into the correct position on the tank ring, and the latch snaps securely into place. In this way, the force of the magnets helps position the tank bag. Secure the tank bag in a single step and hit the road—your luggage stays securely in place, and it’s fun, too.The mechanical locking mechanism secures the tank bag, and the magnets guide the two parts of the ring together. The robust glass-fiber-reinforced plastic, with its high-precision locking geometry, ensures that the tank bag remains firmly in place in all road conditions.The patented PRO Tank Ring is tailored to the fuel filler neck of the specific motorcycle model. This ensures the best possible positioning on the tank. Model-specific adapter ring for the best fit and customized solutions Easy installation on the fuel filler neck Magnetic guide in the PRO Tank Ring for easy attachment Quick release via a pull strap allows the PRO tank bag to be removed in a single step The patented PRO Tank Ring provides a secure hold for PRO tank bags Easy refueling; the fuel cap can be opened as usual Made of glass-fiber-reinforced polyamide Paint-friendly solution: the tank bag does not rest directly on the tank What’sIncluded: 1 x PRO Tank Ring Installation instructions Mounting hardware Details: Material: fiberglass-reinforced plastic / aluminum Color: black Weight: approx. 0.1 kg Note: The PRO Series tank rings are not compatible with the EVO tank bags.
