alpha Technik Tieferlegungssatz 30mm für Kawasaki Z400 ab Mj. 2019-, und Z500 ab Mj. 2024
alpha Technik Tieferlegungssatz 30mm für Kawasaki Z400 ab Mj. 2019-, und Z500 ab Mj. 2024 alpha Technik Tieferlegungssatz für Kawasaki: Z400, Fzg.Typ: ER400D, ab Modelljahr 2019-, EG-BE-Nr.: e1*168/2013*00067*, und Fzg. Typ: ER400F ab Modelljahr 2022-, EG-BE-Nr.: e1*168/2013*00309*, Z500, Fzg. Typ: ER500E, ab Modelljahr 2024, EG-BE-Nr.: e1*168/2013*00365*. Sitzhöhenreduzierung ca. 30 mm, Lieferung erfolgt mit allen erforderlichen Umbauteilen, mit ABE. Produktkennzeichnung: Tieferlegungen Hinweis: Achtung: Der Einbau darf nur durch eine Fachwerkstatt erfolgen. Geänderte Fahrzeugteile: geänderte Positionierung der Gabelrohre in den Gabelbrücken, geänderte Umlenkhebel, Seitenständer kürzen Produkt Typ: Tieferlegungssatz Kawasaki Z400 Lieferumfang: Alle notwendigen Umbauteile
alpha Technik Tieferlegungssatz 50mm für Kawasaki Z400 ab Mj. 2019-, und Z500 ab Mj. 2024
alpha Technik Tieferlegungssatz 50mm für Kawasaki Z400 ab Mj. 2019-, und Z500 ab Mj. 2024 alpha Technik Tieferlegungssatz für Kawasaki: Z400 / Z400 Performance, Fzg.Typ: ER400D, ab Modelljahr 2019-, EG-BE-Nr.: e1*168/2013*00067*, und Fzg. Typ: ER400F ab Modelljahr 2022-, EG-BE-Nr.: e1*168/2013*00309*, Z500 / Z500 Performance, Fzg. Typ: ER500E, ab Modelljahr 2024, EG-BE-Nr.: e1*168/2013*00365*. Sitzhöhenreduzierung ca. 50 mm, Lieferung erfolgt mit allen erforderlichen Umbauteilen, mit ABE. Produktkennzeichnung: Tieferlegungen Hinweis: Achtung: Der Umbau darf nur durch eine Fachwerkstätte erfolgen! Geänderte Fahrzeugteile: - geänderte Umlenkhebel - Einbau Hubbegrenzer - Kürzen der Vorspannhülsen - geänderte Positionierung der Gabelrohre in den Gabelbrücken. - Kürzen des Seitenständers Produkt Typ: Tieferlegungssatz Kawasaki Z400, Z500 (SE) Lieferumfang: Alle notwendigen Umbauteile. mit ABE
ARROW Auspuff INDY RACE EVO Aluminium schwarz für Kawasaki Z500, Ninja 500 Modelljahr 2024-
ARROW Auspuff INDY RACE EVO Aluminium schwarz für Kawasaki Z500, Ninja 500 Modelljahr 2024- ARROW INDY RACE EVO Endschalldämpfer mit schwarzer Aluminium-Hülle und Carbon-Endkappe, inkl. fest verschweisstem Zwischenrohr, mit Straßenzulassung gemäß EU-Verordnung für Kawasaki Z500, Typ ER500E, Modelljahr 2024- Ninja 500, Typ EX500G, Modelljahr 2024- Anbau an Original-Krümmer Produktkennzeichnung: Abgastechnik ARROW Produkt Typ: ARROW INDY RACE EVO schwarz Kawasaki Z500 Ninja Lieferumfang: Endschalldämpfer inkl. Anbaumaterial
ARROW Auspuff INDY RACE EVO Titan für Kawasaki Z500, Ninja 500 Modelljahr 2024-
ARROW Auspuff INDY RACE EVO Titan für Kawasaki Z500, Ninja 500 Modelljahr 2024- ARROW INDY RACE EVO Endschalldämpfer mit Titan-Hülle und Carbon-Endkappe, inkl. fest verschweisstem Zwischenrohr, mit Straßenzulassung gemäß EU-Verordnung für Kawasaki Z500, Typ ER500E, Modelljahr 2024- Ninja 500, Typ EX500G, Modelljahr 2024- Anbau an Original-Krümmer Produktkennzeichnung: Abgastechnik ARROW Produkt Typ: ARROW INDY RACE EVO Titan Kawasaki Z500 Ninja 500 Lieferumfang: Endschalldämpfer inkl. Anbaumaterial
ARROW Auspuff PRO RACE DARK NiChrom schwarz für Kawasaki Z500, Ninja 500 Modelljahr 2024-
ARROW Auspuff PRO RACE DARK NiChrom schwarz für Kawasaki Z500, Ninja 500 Modelljahr 2024- ARROW PRO-RACE DARK Endschalldämpfer in Megafon-Form mit schwarzer NiChrome-Hülle und Edelstahl-Endkappe. mit Straßenzulassung, für Kawasaki Z500, Typ ER500E, Modelljahr 2024- Ninja 500, Typ EX500G, Modelljahr 2024- Anbau an Original-Krümmer Produktkennzeichnung: Abgastechnik ARROW Produkt Typ: ARROW PRO-RACE Kawasaki Z500 Ninja 500
ARROW Auspuff PRO RACE NiChrome für Kawasaki Z500, Ninja 500 Modelljahr 2024-
ARROW Auspuff PRO RACE NiChrome für Kawasaki Z500, Ninja 500 Modelljahr 2024- ARROW PRO-RACE Endschalldämpfer in Megafon-Form mit NiChrome-Hülle und Edelstahl-Endkappe. mit Straßenzulassung, für Kawasaki Z500, Typ ER500E, Modelljahr 2024- Ninja 500, Typ EX500G, Modelljahr 2024- Anbau an Original-Krümmer Produktkennzeichnung: Abgastechnik ARROW Produkt Typ: ARROW PRO-RACE Kawasaki Z500 Ninja 500
ARROW Racing Krümmer Edelstahl für Kawasaki Ninja 400 und Z400 2023-, Ninja 500 und Ninja 500 2024-
ARROW Racing Krümmer Edelstahl für Kawasaki Ninja 400 und Z400 2023-, Ninja 500 und Ninja 500 2024- ARROW Racing Krümmer aus Edelstahl, ohne Homologation für Kawasaki Ninja 400, Typ EX400L, ab Modelljahr 2023- Z 400, Typ ER400F, ab Modelljahr 2023- Ninja 500, Typ EX500G, ab Modelljahr 2024- Z500, Typ ER500E, ab Modelljahr 2024- Zur Verwendung mit ARROW-Endschalldämpfer AR- 71950 / AR-71874 / AR-71967 Produktkennzeichnung: Abgastechnik ARROW Hinweis: Zur Verwendung mit ARROW-Endschalldämpfer AR- 71950 / AR-71874/AR-71957 Produkt Typ: ARROW Racing Krümmer Edelstahl Kawasaki Ninja 400
BASIC tank ring for Kawasaki Z 500 (24-) Hepco & Becker
This functional tank ring enables the attachment of a tank bag from Hepco & Becker.The scope of delivery includes a BASIC tank ring and the counterholder, which can be individually screwed to the tank bag depending on the tank shape and handlebar angle. The tank cap can still be opened without any problems when the tank ring is fitted. In general, you only need this tank ring and a tank bag from H&B and you have everything you need.Each model-specific tank ring is stored in the "My Bike" database for the respective motorcycle model. If no tank ring is stored, you can also use the checklist here in the store to find out manually whether a universal tank ring is available for the desired model. (See main menu -> BASIC tank rings) FEATURES: absolutely secure hold, even at high speeds mechanical locking mechanism Simple operation the Hepco & Becker tank bag is simply put on and locks audibly on the tank ring thanks to an ingenious mechanism Unlocking: The mechanism is unlocked by a lashing strap at the front of the tank bag in the direction of travel; the tank bag is simply removed Simple but effective mechanism Recommended maximum speed with tank bag fitted: 130 km/h (Please note the motorcycle manufacturer's specifications and the model-specific information in the instructions or here with the product) Recommended load in the tank bag: approx. 3kg Tank bag systems do not require an ABE or registration in the papers in Germany. Difference between Lock-it and BASIC tank rings: The general function and operation remains the same. However, compared to the Lock-it tank ring, the Basic tank ring only locks mechanically. With the Lock-it tank ring, the magnets help with centering. The difference lies purely in the two magnetic or plastic domes that are screwed onto the tank ring. The actual model-specific "metal ring" is the same for both versions. Note: A tank bag with Lock-it counterholder cannot be mounted on a BASIC tank ring and vice versa. The tank bag counterholder and tank ring must be from the same system.
C-Bow side carrier for Kawasaki Z 500 (24-) Hepco & Becker
solid side carrier for mounting Hepco & Becker C-Bow side bags and panniers high-quality surface finish normal Hepco & Becker hard-shell cases such as the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended payload: 5kg per bag/case (please observe the fitting instructions, vehicle-specific information and motorcycle manufacturer's specifications for any restrictions that may apply) can usually be combined with top-case carriers, sissy bars or solo racks without any problems (please observe the installation instructions or the vehicle-specific instructions for the respective carrier) Luggage rack extensions can restrict bag mounting on the carrier Luggage racks do not require an ABE or registration in the papers Scope of delivery: left + right + mounting instructions + mounting kit Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder or other indicators. Make sure that the bags always have sufficient distance to the exhaust and that the indicators have a sufficient beam angle. The exhaust jet must not be directed at the bags.
Crash pads for Kawasaki Z 500 (24-) Original
Elegant crash pads with aluminum insert and Kawasaki logo. Provide additional protection for the bodywork. Can be fitted quickly and easily without any modifications to the motorcycle.
Engine guard black for Kawasaki Z 500 (24-) Hepco & Becker
Whether you spend most of your time on rough terrain, on country roads or in the city, a crash bar from Hepco & Becker is always the right choice. Your motorcycle is always effectively protected against unexpected mishaps.More than that: In the event of a fall or unintentional contact with the ground, you can protect the motorcycle and the rider from major damage.The crash bars from Hepco & Becker perfectly trace the lines of the machine and thus give the motorcycle an individual character. Made from an extremely stable tube-in-tube construction, some of the new models have an integrated crash pad.Various surface finishes are available depending on the vehicle model. protects against crashes and falls helpful when lashing the motorcycle high-quality metal coating solid construction, manufactured MADE IN GERMANY in our factory in Pirmasens comprehensive and easy-to-understand assembly instructions Scope of delivery: right + left incl. mounting material and instructions please refer to the stored installation instructions or the vehicle-specific information for any restrictions or instructions that may apply no ABE or registration is required
Front protection bar for Kawasaki Z 500 (24-) Hepco & Becker
good protection in the event of overturns and falls at low speeds Indicators, clutch and brake levers, exhaust silencers, fairing parts etc. are effectively protected high-quality powder coating incl. mounting material
Front spoiler for Kawasaki Z 500 (24-) Original
Give your motorcycle a dynamic look with this unique lower fairing.
High bench seat for Kawasaki Z 500 / Ninja 500 (24-) Original
30 mm higher seat, which increases the seat height from 785 mm to a total of 815 mm. This increases seating comfort and allows taller riders to adopt a more relaxed leg position.
HIGHSIDER pro handlebar adapter For various Kawasaki models (pair)
HIGHSIDER M8 mounting kit for various Kawasaki motorcycles This special mounting kit makes it possible to mount the popular HIGHSIDER handlebar end weights, handlebar end mirrors or lever guards on the original handlebars of Kawasaki motorcycles. The 8 x 1.25 threaded sleeves with M5 internal thread are screwed into the existing thread in the handlebars using a suitable slotted screwdriver. M5 x 30 mm screws are supplied to match the threaded sleeve with M5 internal thread. The M6 screws used for the HIGHSIDER handlebar end weights, handlebar end mirrors and lever protectors are replaced by the M5 screws The HIGHSIDER handlebar accessories can now be fitted to the Kawasaki handlebars. If necessary, the washers included in the set can be used to create a sufficiently large gap between the grip and the attachment. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions: Threaded sleeves Outside: M8 x 1.25 Inside: M5 x 30 mm Washer: Outer diameter: 15 mm Inner diameter: 5.3 mm Adapter screw: M5 x 30 mm Spacer washer: Diameter: 28 mm Thickness: 8 mm Hole: 5.3 mm Scope of delivery: 2 x threaded sleeves 2 x washers 2 x M5 screws 2 x spacers Note: Not suitable for handlebar end mirrors with LED indicators
HIGHSIDER pro license plate holder Akron-RS Pro Kawasaki
HIGHSIDER AKRON-RS PRO license plate holder incl. license plate lightThe design of the HIGHSIDER AKRON-RS PRO license plate holder perfectly matches the lines of your bike.The model-specific holder of the HIGHSIDER AKRON-RS PRO allows mounting on the original mounting points of your bike and thus replacement without further drilling or cutting.To prevent damage to cables, all sharp-edged feed-throughs are protected by a rubber membrane grommet.The license plate is made of sheet steel and is 2 mm thick. It is precisely cut to size using a laser. After edging, it is given a weather-resistant black powder coating.This ensures an optimum fit and durability.The stepless adjustment option allows you to position the plate as required without drilling. There is an additional locking screw to hold the plate in this position.The width of the blinker brackets on the HIGHSIDER AKRON-RS PRO can be adjusted, making them suitable for all types of accessory indicators. This adjustment option allows you to adapt the position of your indicators to a wide variety of license plates. The 8 mm holes are slotted to the side to allow the indicators to be fitted without disconnecting them from the wiring harness.You can also individually adjust the position of the rear reflector using a slider. This makes it easy to adapt to the different versions of EU license plates.Two rubber washers are included to securely screw the license plate and reduce vibrations. Another rubber buffer supports the license plate on its underside.This PRO version of the HIGHSIDER AKRON-RS includes the very small HIGHSIDER license plate light milled from high-quality aluminium with mounting plate and support arm. The bracket is adjustable in height and designed to allow mounting in the legally prescribed position.Details:- model-specific bracket- infinitely adjustable blinker holder- slotted blinker holder for simple mounting without cable separation- infinitely adjustable reflector, E-approved- suitable for European license plates- Infinitely adjustable angle of inclination- Additional screw for optimum positional security- Simple fixing without additional work steps (e.g. drilling) - Easy to install without the need for additional toolsE.g. drilling)- easy mounting of the license plate thanks to elongated holes- license plate light incl. holder included in delivery Bracket included in scope of delivery- license plate light, E-approved- infinitely adjustable license plate light- many different options for mounting the license plate lightThe HIGHSIDER AKRON-RS PRO is supplied as standard:- Model-specific bracket with mounting parts- HIGHSIDER AKRON-RS license plate mounting plate- Adjustable blinker brackets- E-approved reflector with adjustable bracket- E-approved license plate light- Installation instructionsNotes:- If side reflectors are fitted to your original license plate holder, these must be refitted in a suitable position or replaced with new ones.- Special blinker holders are optionally available for the original indicators.Tip:If you have not found a model-specific license plate holder for your vehicle, you are sure to find what you are looking for in the universal license plate holders from HIGHSIDER, which are available in many different designs.
Highsider Pro license plate holder turn signal adapter for Kawasaki original turn signals
With this black aluminum blinker adapter, the original indicators can be used on our HIGHSIDER or HIGHSIDER pro license plate holders. Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike to your liking. Scope of delivery: 1 pair Suitable for: Kawasaki ELIMINATOR 500 (2024) Kawasaki NINJA 650 ABS (EX650K) (2023) Kawasaki NINJA ZX-10RR (2021-2023) Kawasaki NINJA ZX-10R (2022-2023) Kawasaki NINJA ZX-4RR (2024) Kawasaki NINJA ZX-6R (2024) Kawasaki VERSYS 650 ABS (KLE650F) (2022-2023) Kawasaki Z 500 (2024) Kawasaki Z 650 ABS (2023) Kawasaki Z 650 RS (2022-2023) Kawasaki Z 900 (2023-2025) Kawasaki Z 900 SE (2025)
HIGHSIDER pro turn signal adapter black For original turn signals, For Kawasaki, For license plate holder (pair)
With this black aluminum blinker adapter, the original indicators can be used on our HIGHSIDER or HIGHSIDER pro license plate holders. Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike to your liking. Scope of delivery: 1 pair
Indoor tarpaulin Original Kawasaki
High-quality ripstop material. Easily accessible buckle. Kawasaki-specific green honeycomb design.
L-fork for mounting stand Original Kawasaki
L-fork for mounting stand Original Kawasaki
License plate holder for Kawasaki Z 500 / Ninja 500 / Ninja 500 SE (24-)
alpha Technik License plate holder for KawasakiZ500, type ER500E, from model year 2024-,Ninja 500 / Ninja 500 SE, type EX500G, from model year 2024-.With reflector and license plate illumination.For use with original indicators. Please order adapter for accessory indicators separately under "Accessories". Features:- Stainless steel and aluminium - high-precision laser cut, rust-free & resistant.- Lightweight & yet stable.- Elegantly finished with black cathodic dip coating or black anodized coating.- Infinitely adjustable tilt Infinitely adjustable inclination- All necessary fastening materials for vehicle mounting available.- License plate light and reflector with E-mark.- Adjustable width of turn signal spacing, thus compliant with directives.- Made in Germany - All parts made in Germany. The short license plate holder from alpha Technik impresses with its sporty design, functionality and simple installation (detailed installation instructions included). With a width of approx. 180 mm, the back plate is ideal for the new, narrow license plates.
License plate holder for Kawasaki Z 500 / Ninja 500 / Ninja 500 SE (24-)
alpha Technik License plate holder for KawasakiZ500, type ER500E, from model year 2024-,Ninja 500 / Ninja 500 SE, type EX500G, from model year 2024-.With reflector and license plate illumination.For use with original indicators. Please order adapter for accessory indicators separately under "Accessories". Features:- Stainless steel and aluminium - high-precision laser cut, rust-free & resistant.- Lightweight & yet stable.- Elegantly finished with black cathodic dip coating or black anodized coating.- Infinitely adjustable tilt Infinitely adjustable inclination- All necessary fastening materials for vehicle mounting available.- License plate light and reflector with E-mark.- Adjustable width of turn signal spacing, thus compliant with directives.- Made in Germany - All parts made in Germany. The short license plate holder from alpha Technik impresses with its sporty design, functionality and simple installation (detailed installation instructions included). With a width of approx. 180 mm, the back plate is ideal for the new, narrow license plates.
LSL Alu-Lenker CLUBMAN® Speed Bar AS1, 7/8 Zoll, schwarz
LSL Alu-Lenker CLUBMAN® Speed Bar AS1, 7/8 Zoll, schwarz LSL Lenker S1 CLUBMAN®, Alu, schwarz Breite 690mm, Höhe 40mm,Tiefe 115mm, Produktkennzeichnung: LSL Lenker Aluminium Produkt Typ: LSL Alu-Lenker CLUBMAN® Speed Bar AS1, 7/8 Zoll, s
