C-Bow side carrier for Triumph Rocket 3 R / GT (20-) Hepco & Becker
solid side carrier for mounting Hepco&Becker C-Bow side bags and panniers high quality surface finish normal Hepco&Becker hard cases, like the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended load: 5kg per bag/case (please refer to the mounting instructions, vehicle specific instructions, as well as motorcycle manufacturer information for any restrictions that may occur) can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the mounting instructions or the vehicle-specific instructions for the respective carrier) Luggage rack extensions can restrict the mounting of bags on the rack Luggage carriers do not require ABE or registration in the papers Scope of delivery: left+ right + mounting instructions + mounting kit Developed for the standard condition of the machine. Not tested with accessories such as: exhaust, license plate holder or other turn signals. Note that with third-party accessories, the bags always have sufficient distance to the exhaust and the turn signals have a sufficient beam angle. The exhaust beam must not be directed at the bags.
HIGHSIDER CONERO handlebar grip rubber black glossy
It's up to you: Enjoy the special CONERO design on the handlebar. HIGHSIDER has just the right grips in its range for modern or classic motorcycles. Removable end caps allow the installation of handlebar ends, handlebar end mirrors or handlebar end turn signals. The elaborately designed grip rubber convinces with high-quality machined aluminum ring at the outer ends. The HIGHSIDER lettering incorporated into the rubberized surface, on the other hand, has a pleasantly discreet effect.Our HIGHSIDER CONERO series lives on a minimalist design and fits perfectly with undisguised motorcycles. The shapely and high-quality machined aluminum add-on parts give your roadster face and character. The HIGHSIDER CONERO series brings you back to the time when a motorcycle was just allowed to be a motorcycle - reduced to ride, experience and experience.Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With a maximum of quality and functionality, you can easily design your bike according to your wishes.Dimensions:Overall length: 132 mmOuter diameter: approx. 34 mmOuter diameter aluminum ring: approx. 35 mmMaterial: rubber/aluminumGrip ends: closed (removable end cap)Suitable for 7/8 inch (22 mm) handlebarsScope of delivery: 1 pair
HIGHSIDER CONERO handlebar grip rubber black matt
It's up to you: Enjoy the special CONERO design on the handlebar. HIGHSIDER has just the right grips in its range for modern or classic motorcycles. Removable end caps allow the installation of handlebar ends, handlebar end mirrors or handlebar end turn signals. The elaborately designed grip rubber convinces with high-quality machined aluminum ring at the outer ends. The HIGHSIDER lettering incorporated into the rubberized surface, on the other hand, has a pleasantly discreet effect.Our HIGHSIDER CONERO series lives on a minimalist design and fits perfectly with undisguised motorcycles. The shapely and high-quality machined aluminum add-on parts give your roadster face and character. The HIGHSIDER CONERO series brings you back to the time when a motorcycle was just allowed to be a motorcycle - reduced to ride, experience and experience.Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With a maximum of quality and functionality, you can easily design your bike according to your wishes.Dimensions:Overall length: 132 mmOuter diameter: approx. 34 mmOuter diameter aluminum ring: approx. 35 mmMaterial: rubber/aluminumGrip ends: closed (removable end cap)Suitable for 7/8 inch (22 mm) handlebarsScope of delivery: 1 pair
HIGHSIDER CONERO Lenkergriffgummi schwarz glänzend
Du hast es in der Hand: Genieße das besondere CONERO Design am Lenker. Für moderne oder klassische Motorräder hat HIGHSIDER genau die richtigen Griffe im Programm. Abnehmbare Endkappen ermöglichen die Montage von Lenkerenden, Lenkerendspiegel oder Lenkerendenblinker. Das aufwendig designte Griffgummi überzeugt mit hochwertig gearbeitetem Aluminiumring an den äußeren Enden. Der in die gummierte Oberfläche eingearbeitete HIGHSIDER-Schriftzug wirkt hingegen angenehm dezent.Unsere HIGHSIDER CONERO Serie lebt von einem minimalistischen Design und passt perfekt zu unverkleideten Motorrädern. Die formschönen und hochwertig gearbeiteten Anbauteile aus Aluminium geben deinem Roadster Gesicht und Charakter. Die HIGHSIDER CONERO Serie bringt dir die Zeit zurück, in der ein Motorrad einfach ein nur Motorrad sein durfte - reduziert auf fahren, erfahren und erleben.Präzise abgestimmt - das umfangreiche Zubehör von HIGHSIDER ist perfekt auf dein Motorrad zugeschnitten. Mit einem Höchstmaß an Qualität und Funktionalität kannst du dein Bike so ganz einfach nach deinem Wünsch gestalten.Maße:Gesamtlänge: 132 mmAußendurchmesser: ca. 34 mmAußendurchmesser Aluminiumlring: ca. 35 mmMaterial: Gummi/AluminiumGriffenden: geschlossen (entnehmbare Endkappe)Passend für 7/8 Zoll- (22 mm) LenkerLieferumfang: 1 Paar
HIGHSIDER CONERO Lenkergriffgummi schwarz matt
Du hast es in der Hand: Genieße das besondere CONERO Design am Lenker. Für moderne oder klassische Motorräder hat HIGHSIDER genau die richtigen Griffe im Programm. Abnehmbare Endkappen ermöglichen die Montage von Lenkerenden, Lenkerendspiegel oder Lenkerendenblinker. Das aufwendig designte Griffgummi überzeugt mit hochwertig gearbeitetem Aluminiumring an den äußeren Enden. Der in die gummierte Oberfläche eingearbeitete HIGHSIDER-Schriftzug wirkt hingegen angenehm dezent.Unsere HIGHSIDER CONERO Serie lebt von einem minimalistischen Design und passt perfekt zu unverkleideten Motorrädern. Die formschönen und hochwertig gearbeiteten Anbauteile aus Aluminium geben deinem Roadster Gesicht und Charakter. Die HIGHSIDER CONERO Serie bringt dir die Zeit zurück, in der ein Motorrad einfach ein nur Motorrad sein durfte - reduziert auf fahren, erfahren und erleben.Präzise abgestimmt - das umfangreiche Zubehör von HIGHSIDER ist perfekt auf dein Motorrad zugeschnitten. Mit einem Höchstmaß an Qualität und Funktionalität kannst du dein Bike so ganz einfach nach deinem Wünsch gestalten.Maße:Gesamtlänge: 132 mmAußendurchmesser: ca. 34 mmAußendurchmesser Aluminiumlring: ca. 35 mmMaterial: Gummi/AluminiumGriffenden: geschlossen (entnehmbare Endkappe)Passend für 7/8 Zoll- (22 mm) LenkerLieferumfang: 1 Paar
LSL brake lever BOW R23R black
LSL lever BOWThe lever is characterized by a previously unattained, lightweight design, which is characterized by large cutouts between the mounting points and the transition to the lever surface. This possibility was created by a newly developed design of the adjustment lock. The adjustment is cleverly carried out by means of a plastic key supplied, which actuates the anodized adjustment star in six different stages without scratching. Thus the adjustment of the lever can be adapted to the needs of the driver completely as desired. In the long version, a slotted hole at the end of the lever in the horizontal direction prevents unintentional application of the lever at high speeds.Special features:- With ABE- Ultra-light lever design (approx. 130g)- 6-fold adjustable- A predetermined breaking point allows the long version to continue driving after a slip and ensures the continued function of the lever- Aerodynamically designed slotted hole at the end of the lever in the long version prevents the application of the lever at high speedsColor: black / black Info about ABE:For this article an ABE and/or parts certificate are available. Please check if your vehicle is registered in the ABE or in the parts certificate and if additional mounting parts (e.g. clamping blocks) are required (see document). For some models a preliminary required manufacturer's confirmation is available. Downloads: General type approval (ABE)Mounting instructions
LSL brake lever BOW R23R black, short for Kawasaki, KTM, Triumph
LSL lever BOWThe lever is characterized by an unprecedented, lightweight design, which is characterized by large cut-outs between the attachment points and the transition to the lever surface. This possibility was created by a newly developed design of the adjustment lock. The adjustment is cleverly carried out using a plastic key supplied, which operates the anodized adjustment star in six different stages without scratching. This means that the adjustment of the lever can be adapted to suit the rider's requirements. In the long version, an elongated hole at the end of the lever in the horizontal direction prevents unintentional application of the lever at high speeds.Special features:- With ABE- Ultra-light lever design (approx. 130g)- 6-way adjustable- A predetermined breaking point allows the long version to continue riding after a slip and ensures that the lever continues to function- Aerodynamically designed slotted hole at the end of the lever on the long version prevents the lever from being applied at high speedsColor: black / black Information on ABE:An ABE and/or parts certificate is available for this article. Please check whether your vehicle is registered in the ABE or parts certificate and whether additional add-on parts (e.g. clamps) are required (see document). For some models, a preliminary manufacturer's confirmation is required. Suitable for:Kawasaki ZX-10 R Ninja /RR /SE, 2016-2020 (ZXT00S)KTM 1190 Adventure / R 2013-2016KTM 1290 Super Adventure /-T 2015-2017 (KV59490)KTM 1290 Super Adventure R (BJ 17-20)KTM 1290 Super Adventure S (BJ 17-20)KTM 1290 Super Adventure S / R 2021-KTM 990 Super Duke / R 2005-2013 (LC8EF, VD, KTMLC8EFI)KTM 1290 Super Duke GT (BJ 19-21)KTM 1290 Super Duke R (BJ 17-19)KTM 1290 Super Duke R /R Evo (BJ 2020-)KTM 690 Duke / R 2008-2011 (A3, KTMDuke)KTM 690 Duke / R 2012-2019 (LDT403, KTMDuke)KTM 890 Duke R 2020- (KTM R2 Duke)KTM 990 Supermoto / SMR 2008-2013 (990SM,990SMR,LC8SM)KTM 1190 RC 8 /R 2008-2015 (RC8)Triumph Speed Triple 1200 RS 2021- (PB01)Triumph Daytona 675 /R 2013-2016 (H67)Triumph Scrambler 1200 XC/XE 2019- (DS01)Triumph Speed Triple 1050 /R 2011-2015 (515NV, 105, 115, 135)Triumph Speed Twin 1200 2019-2020 (DD01)Triumph Street Triple 765 S/R/RS 2017-2019 (HD01)Triumph Street Triple 765 R/RS 2020-2022 (HD04)Triumph Thruxton 1200 /R 2016-2020 (DE01)Triumph Rocket 3 GT/R 2019- (Y101) Downloads:General operating license (ABE)Fitting instructions
LSL brake lever BOW R23R silver
LSL lever BOWThe lever is characterized by a previously unattained, lightweight design, which is characterized by large cutouts between the mounting points and the transition to the lever surface. This possibility was created by a newly developed design of the adjustment lock. The adjustment is cleverly carried out by means of a plastic key supplied, which actuates the anodized adjustment star in six different stages without scratching. Thus the adjustment of the lever can be adapted to the needs of the driver completely as desired. In the long version, a slotted hole at the end of the lever in the horizontal direction prevents unintentional application of the lever at high speeds.Special features:- With ABE- Ultra-light lever design (approx. 130g)- 6-fold adjustable- A predetermined breaking point allows the long version to continue driving after a slip and ensures the continued function of the lever- Aerodynamically designed slotted hole at the end of the lever in the long version prevents the lever from being applied at high speedsColor: silver / silver Info about ABE:For this article an ABE and/or parts certificate are available. Please check if your vehicle is registered in the ABE or in the parts certificate and if additional mounting parts (e.g. clamps) are needed (see document). For some models a preliminary required manufacturer's confirmation is available. Downloads: General type approval (ABE)Mounting instructions
LSL brake lever BOW R23R silver, short
LSL lever BOWThe lever is characterized by a previously unattained, lightweight design, which is characterized by large cutouts between the mounting points and the transition to the lever surface. This possibility was created by a newly developed design of the adjustment lock. The adjustment is cleverly carried out by means of a plastic key supplied, which actuates the anodized adjustment star in six different stages without scratching. Thus the adjustment of the lever can be adapted to the needs of the driver completely as desired. In the long version, a slotted hole at the end of the lever in the horizontal direction prevents unintentional application of the lever at high speeds.Special features:- With ABE- Ultra-light lever design (approx. 130g)- 6-fold adjustable- A predetermined breaking point allows the long version to continue driving after a slip and ensures the continued function of the lever- Aerodynamically designed slotted hole at the end of the lever in the long version prevents the application of the lever at high speedsColor: black / black Info about ABE:For this article an ABE and/or parts certificate are available. Please check if your vehicle is registered in the ABE or in the parts certificate and if additional mounting parts (e.g. clamping blocks) are required (see document). For some models a preliminary required manufacturer's confirmation is available. Downloads: General type approval (ABE)Mounting instructions
LSL Bremshebel Classic R23R, schwarz/rot
LSL Bremshebel Classic R23R, schwarz/rot LSL Bremshebel Classic R23R, schwarz/rot Produktkennzeichnung: LSL Brems- und Kupplungshebel Produkt Typ: LSL Bremshebel Classic R23R, schwarz/rot, lang
LSL clutch lever BOW L25R black
LSL lever BOWThe lever is characterized by a previously unattained, lightweight design, which is characterized by large cutouts between the mounting points and the transition to the lever surface. This possibility was created by a newly developed design of the adjustment lock. The adjustment is cleverly carried out by means of a plastic key supplied, which actuates the anodized adjustment star in six different stages without scratching. Thus the adjustment of the lever can be adapted to the needs of the driver completely as desired. In the long version, a slotted hole at the end of the lever in the horizontal direction prevents unintentional application of the lever at high speeds.Special features:- With ABE- Ultra-light lever design (approx. 130g)- 6-fold adjustable- A predetermined breaking point allows the long version to continue driving after a slip and ensures the continued function of the lever- Aerodynamically designed slotted hole at the end of the lever in the long version prevents the lever at high speedsColor:black / black This item also fits the following vehicles: Kawasaki ZZR 1400 (2016-2019) Kawasaki ZZR 1400 Performance Sport (2018-2019) Triumph Rocket III GT (2019-2022) Triumph Rocket III R (2019-2022) Triumph Rocket III TFC (2019-2021) ABE info:ABE and/or parts certificates are available for this item. Please check if your vehicle is registered in the ABE or parts certificate and if additional add-on parts (e.g. clamping blocks) are required (see document). For some models a preliminary required manufacturer's confirmation is available. Downloads: General type approval (ABE)Mounting instructions
LSL clutch lever BOW L25R black, short
LSL lever BOWThe lever is characterized by a previously unattained, lightweight design, which is characterized by large cutouts between the mounting points and the transition to the lever surface. This possibility was created by a newly developed design of the adjustment lock. The adjustment is cleverly carried out by means of a plastic key supplied, which actuates the anodized adjustment star in six different stages without scratching. Thus the adjustment of the lever can be adapted to the needs of the driver completely as desired. In the long version, a slotted hole at the end of the lever in the horizontal direction prevents unintentional application of the lever at high speeds.Special features:- With ABE- Ultra-light lever design (approx. 130g)- 6-fold adjustable- A predetermined breaking point allows the long version to continue driving after a slip and ensures the continued function of the lever- Aerodynamically designed slotted hole at the end of the lever in the long version prevents the lever at high speedsColor:black / black This item also fits the following vehicles: Kawasaki ZZR 1400 (2016-2019) Kawasaki ZZR 1400 Performance Sport (2018-2019) Triumph Rocket III GT (2019-2022) Triumph Rocket III R (2019-2022) Triumph Rocket III TFC (2019-2021) ABE info:ABE and/or parts certificates are available for this item. Please check if your vehicle is registered in the ABE or parts certificate and if additional add-on parts (e.g. clamping blocks) are required (see document). For some models a preliminary required manufacturer's confirmation is available. Downloads: General type approval (ABE)Mounting instructions
LSL clutch lever BOW L25R silver
LSL lever BOWThe lever is characterized by a previously unattained, lightweight design, which is characterized by large cutouts between the mounting points and the transition to the lever surface. This possibility was created by a newly developed design of the adjustment lock. The adjustment is cleverly carried out by means of a plastic key supplied, which actuates the anodized adjustment star in six different stages without scratching. Thus the adjustment of the lever can be adapted to the needs of the driver completely as desired. In the long version, a slotted hole at the end of the lever in the horizontal direction prevents unintentional application of the lever at high speeds.Special features:- With ABE- Ultra-light lever design (approx. 130g)- 6-fold adjustable- A predetermined breaking point allows the long version to continue driving after a slip and ensures the continued function of the lever- Aerodynamically designed slotted hole at the end of the lever in the long version prevents the lever at high speedsColor:silver / silver This article fits also for the following vehicles: Kawasaki ZZR 1400 (2016-2019) Kawasaki ZZR 1400 Performance Sport (2018-2019) Triumph Rocket III GT (2019-2022) Triumph Rocket III R (2019-2022) Triumph Rocket III TFC (2019-2021) ABE info:ABE and/or parts certificates are available for this item. Please check if your vehicle is registered in the ABE or parts certificate and if additional add-on parts (e.g. clamping blocks) are required (see document). For some models a preliminary required manufacturer's confirmation is available. Downloads: General type approval (ABE)Mounting instructions
LSL clutch lever BOW L25R silver, short
LSL lever BOWThe lever is characterized by a previously unattained, lightweight design, which is characterized by large cutouts between the mounting points and the transition to the lever surface. This possibility was created by a newly developed design of the adjustment lock. The adjustment is cleverly carried out by means of a plastic key supplied, which actuates the anodized adjustment star in six different stages without scratching. Thus the adjustment of the lever can be adapted to the needs of the driver completely as desired. In the long version, a slotted hole at the end of the lever in the horizontal direction prevents unintentional application of the lever at high speeds.Special features:- With ABE- Ultra-light lever design (approx. 130g)- 6-fold adjustable- A predetermined breaking point allows the long version to continue driving after a slip and ensures the continued function of the lever- Aerodynamically designed slotted hole at the end of the lever in the long version prevents the lever at high speedsColor:silver / silver This article fits also for the following vehicles: Kawasaki ZZR 1400 (2016-2019) Kawasaki ZZR 1400 Performance Sport (2018-2019) Triumph Rocket III GT (2019-2022) Triumph Rocket III R (2019-2022) Triumph Rocket III TFC (2019-2021) ABE info:ABE and/or parts certificates are available for this item. Please check if your vehicle is registered in the ABE or parts certificate and if additional add-on parts (e.g. clamping blocks) are required (see document). For some models a preliminary required manufacturer's confirmation is available. Downloads: General type approval (ABE)Mounting instructions
Stompgrip Traction Pads Rally Pad schwarz
Stompgrip Traction Pads Rally Pad schwarz Stompgrip Rally Pad Icon schwarz, Streetbike Rally Pad, für Fahrzeuge von Husqvarna, Honda, Kawasaki, KTM, Suzuki, Triumph und Yamaha gemäß Verwendungsliste Produktkennzeichnung: Traktionspads SG Hinweis: Mehrteiliger Aufklebersatz für die Tankflanken, um mehr Halt beim Hanging-off zu gewährleisten. Produkt Typ: Stompgrip Rally Pad schwarz
SW-Motech Navi mount 1" ball kit for Triumph Rocket 3 GT /R - SW Motech
The 1" ball kit allows navigation devices to be attached to handlebars with a diameter of 22, 28 mm or 1 inch by means of a mounting clamp. A clamping arm can be mounted on the ball adapter, which allows variable postioning of the navigation device. Mounting clamp for handlebars with a diameter of 22, 28 mm or 1 inch Suitable for the following vehicles Triumph Rocket 3 GT (19-), Y101 Triumph Rocket 3 R (19-), Y101 Details
SW-Motech Navi mount kit for GoPro camera for Triumph Rocket 3 GT /R - SW Motech
And action! The GoPro HD HERO camera models combine robustness, versatility and an amazingly high image quality for the housing size. This makes the compact digital camera ideally suited for use on the motorcycle. SW-MOTECH supplies a versatile universal mount that comes as a complete set with a wide range of mounting options for the current generation of action cameras. Mounting options include a mirror thread mount and mounts with M6 or M8 ball as well as clamps for tube diameters of 22 and 28 mm and 1 inch. The swiveling RAM arm facilitates precise positioning of the camera to align the image section exactly to the rider's needs. SW-MOTECH universal kit offers a variety of different mounting options on the motorcycle: the included 1 inch ball can be mounted on an M6 or M8 thread, on the mirror thread holder as well as with a mounting clamp. The mounting clamp is designed for handlebars with a diameter of 22, 28 mm or 1 inch. A pivoting clamp arm facilitates positioning in the cockpit - so the display always remains in view without obscuring the view of the instruments. Complete set for mounting a GoPro HD camera For GoPro HD HERO and GoPro HD Session Numerous mounting options Can be used on almost any motorcycle model Mounting clamps made of strong, fiberglass-reinforced plastic For mounting, for example, on handlebars, frames or crash bars with tube diameters of 22 mm, 28 mm or 1 inch Can also be mounted in the handlebar receptacle Can also be mounted directly on M6 or M8 threads Balls and 2 inch clamping arm allow individual positioning Clamping arm can be swiveled around two axes by up to 90° or 45 1 inch ball can be mounted on an M6 or M8 thread, on the mirror thread holder or also with a mounting clamp Mounting clamp for handlebars with a diameter of 22, 28 mm or 1 inch Suitable for the following vehicles Triumph Rocket 3 GT (19-), Y101 Triumph Rocket 3 R (19-), Y101 Details Total weight: approx. 0,5 kg Color: black Scope of delivery 1 x RAM clamp arm 1 x ball adapter M8 1 x RAM ball adapter for GoPro 1 x mounting plate for mirror thread 1 x mounting clamp Mounting instructions Mounting material
SW-Motech Navi mount kit T-Lock with Navi Case for Triumph Rocket 3 GT /R - SW Motech
This all-round carefree package includes a weatherproof Navi Case device bag and various fastening elements. The T-Lock mount on the back of the Navi Case allows quick attachment to the Universal Navi Kit: A quarter turn clockwise fixes the Navi Case to the clamp arm.This Universal Kit offers a variety of different mounting options on the motorcycle: The included 1 inch ball can be mounted on a M6 or M8 thread, on the mirror thread holder as well as with a mounting clamp. The mounting clamp is designed for handlebars with a diameter of 22, 28 mm or 1 inch. A pivoting clamp arm facilitates positioning in the cockpit - so the display always remains in view without obscuring the view of the instruments. Splash-proof and touch-compatible Navi Case device pouch with sun visor For devices in landscape format Inside dimensions Navi Case: 171 x 114 mm Outer dimensions Navi Case: 185 x 125 mm Viewing window size Navi Case: 155 x 98 mm T-Lock holder for quick attachment to the clamp arm Balls and 2 inch clamp arm allow individual positioning Clamping arm can be swiveled around two axes by up to 90° and 45° respectively 1 inch ball can be mounted on a M6 or M8 thread, on the mirror thread holder or also with a mounting clamp Mounting clamp for handlebars with a diameter of 22, 28 mm or 1 inch Suitable for the following vehicles Triumph Rocket 3 GT (19-), Y101 Triumph Rocket 3 R (19-), Y101 Details Total weight: approx. 0,7 kg Scope of delivery 1 x Navi Case 1 x mounting clamp with rubber inserts 1 x ball with M8 thread and M6 adapter 1 x 2" clamp arm 1 x Ball joint with mounting plate 1 x T-Lock holder Mounting instructions Mounting material Note Whether all functions of the touch control panel can be used depends on the device model (e.g. fingerprint sensor) Suitable for the following models:Blaupunkt Motopilot 43 EU LMUBMW Navigator V, VIGarmin Zumo340-LM, 345, 346 LMT-S, 350 LM, 390 LM, 395 LM, 396 LMT-S, 590, 595 LM, 660, DriveSmart 55 MT-D, DriveAssist 51 EULMT-DTomTom Rider:50, 400, 420, 410, 450, 500, 550, Urban Rider, Start 52, Start 62, GO Premium, GO Premium, GO Essential TMC, GO Essential TMC, GO 520, GO 620, GO 5200, GO 6200
SW-Motech Navi Mount Kit T-Lock with Phone Case for Triumph Rocket 3 GT /R - SW Motech
This all-round carefree package includes a weatherproof Phone Case device bag and various fastening elements. The T-Lock mount on the back of the Phone Case allows for quick attachment to the Universal Navi Kit: a quarter turn clockwise fixes the Phone Case to the clamp arm.This Universal Kit offers a variety of different mounting options on the motorcycle: the included 1 inch ball can be mounted to either an M6 or M8 thread, to the mirror thread mount, or with a mounting clamp. The mounting clamp is designed for handlebars with a diameter of 22, 28 mm or 1 inch. A pivoting clamp arm facilitates positioning in the cockpit - so the display always remains in view without obscuring the view of the instruments. Splash-proof and touch-compatible Phone Case device pouch with sun visor For devices in portrait format Inner dimensions Phone Case: 83 x 171 mm Outer dimensions Phone Case: 95 x 185 mm Viewing window size Phone Case: 68 x 156 mm T-Lock holder for quick attachment to clamp arm Balls and 2 inch clamp arm allow individual positioning Clamping arm can be swiveled around two axes by up to 90° and 45° respectively 1 inch ball can be mounted on a M6 or M8 thread, on the mirror thread holder or also with a mounting clamp Mounting clamp for handlebars with a diameter of 22, 28 mm or 1 inch
SW-Motech Navi mount kit T-Lock with smartphone Drybag for Triumph Rocket 3 GT /R - SW Motech
This all-round carefree package includes a waterproof Smartphone Drybag and various fastening elements. The T-Lock mount on the back of the Smartphone Drybag allows quick attachment to the Universal Navi Kit: With a quarter turn clockwise, the Smartphone Drybag is fixed to the clamping arm. The waterproof Smartphone Drybag with large viewing window and an internal dimension of 160 x 80 mm is suitable for almost all common smartphones up to a size of 6.5 inches. This universal kit offers a variety of different mounting options on the motorcycle: the included 1 inch ball can be mounted on an M6 or M8 thread, on the mirror thread holder as well as with a mounting clamp. The mounting clamp is designed for handlebars with a diameter of 22, 28 mm or 1 inch. A pivoting clamp arm facilitates positioning in the cockpit - so the display always remains in view without obscuring the view of the instruments. Suitable for smartphones up to 6.5 inches Internal dimensions: 160 x 80 mm Waterproof roll closure Water repellent coating T-Lock holder for quick attachment to the clamp arm Balls and 2 inch clamp arm allow individual positioning Clamping arm can be swiveled around two axes by up to 90° or 45 1 inch ball can be mounted on a M6 or M8 thread, on the mirror thread holder or also with a mounting clamp Mounting clamp for handlebars with a diameter of 22, 28 mm or 1 inch Suitable for the following vehicles Aprilia RSV 4 Tuono 1100 (21-), KZ Details Total weight: approx. 0.5 kg Scope of delivery 1 x Smartphone Drybag 1 x mounting clamp with rubber inserts 1 x ball with M8 thread and M6 adapter 1 x 2" clamp arm 1 x ball joint with mounting plate 1 x T-Lock holder Mounting instructions Mounting material
SW-Motech Navi mount kit T-Lock with smartphone holder for Triumph Rocket 3 GT /R - SW Motech
SW-Motech Universal Kit offers a variety of different mounting options on the motorcycle: The included 1 inch ball can be mounted on a M6 or M8 thread, on the mirror thread holder as well as with a mounting clamp. The mounting clamp is designed for handlebars with a diameter of 22, 28 mm or 1 inch. A pivoting clamp arm facilitates positioning in the cockpit - so the display is always in view without obscuring the view of the instruments. The included T-Lock holder with smartphone mount allows smartphones to be quickly attached to the Universal Navi Kit. With a quarter turn clockwise, the T-Lock holder can be fixed to the clamping arm. The silicone tightening straps of the smartphone holder allow devices of different sizes to be attached. For smartphones with maximum outer dimensions of 150 x 75 x 10 mm and minimum outer dimensions of 130 x 70 x 6 mm T-Lock holder for quick attachment to the clamp arm Smartphone mount with silicone clamping straps Balls and 2 inch clamp arm allow individual positioning Clamp arm can be swiveled around two axes by up to 90° and 45° respectively 1 inch ball can be mounted on an M6 or M8 thread, on the mirror thread holder or also with a mounting clamp Mounting clamp for handlebars with a diameter of 22, 28 mm or 1 inch Suitable for the following vehicles Triumph Rocket 3 GT (19-), Y101 Triumph Rocket 3 R (19-), Y101 Details Total weight: approx. 0,5 kg Scope of delivery 1 x mounting clamp with rubber inserts 1 x ball with M8 thread and M6 adapter 1 x holder for mounting on mirror thread 1 x 2" clamping arm 1 x ball joint with mounting plate 1 x T-Lock holder for smartphone Mounting instructions Mounting material
SW-Motech Navi mount kit T-Lock with smartphone holder large for Triumph Rocket 3 GT /R - SW Motech
SW-Motech Universal Kit offers a variety of different mounting options on the motorcycle: The included 1 inch ball can be mounted on a M6 or M8 thread, on the mirror thread holder as well as with a mounting clamp. The mounting clamp is designed for handlebars with a diameter of 22, 28 mm or 1 inch. A pivoting clamp arm facilitates positioning in the cockpit - so the display is always in view without obscuring the view of the instruments. The included T-Lock holder with smartphone mount allows smartphones to be quickly attached to the Universal Navi Kit. With a quarter turn clockwise, the T-Lock holder can be fixed to the clamping arm. The silicone tightening straps of the smartphone holder allow devices of different sizes to be attached. For smartphones with maximum outer dimensions of 165 x 80 x 12 mm and minimum outer dimensions of 144 x 71 x 7 mm T-Lock holder for quick attachment to the clamp arm Smartphone mount with silicone clamping straps Balls and 2 inch clamp arm allow individual positioning Clamp arm can be swiveled around two axes by up to 90° and 45° respectively 1 inch ball can be mounted on an M6 or M8 thread, on the mirror thread holder or also with a mounting clamp Mounting clamp for handlebars with a diameter of 22, 28 mm or 1 inch Suitable for the following vehicles Triumph Rocket 3 GT (19-), Y101 Triumph Rocket 3 R (19-), Y101 Details Total weight: approx. 0,5 kg Scope of delivery 1 x mounting clamp with rubber inserts 1 x ball with M8 thread and M6 adapter 1 x holder for mounting on mirror thread 1 x 2" clamping arm 1 x ball joint with mounting plate 1 x T-Lock holder for smartphone Mounting instructions Mounting material
SW-Motech Navi mount kit X-Grip for large smartphones for Triumph Rocket 3 GT /R - SW Motech
This versatile kit is suitable for securely attaching a large smartphone to (almost) any motorcycle. The X-Grip clamp impresses with its versatility - it gives smartphones a secure hold and can be flexibly aligned on a clamp arm with the 1" adapter ball. The rubber fingers of the X-Grip clamp have a firm grip on the smartphone while allowing free view and access to the device. The included universal kit offers a variety of different mounting options. The included 1" ball can be mounted to either an M6 or M8 thread, mirror thread mount, or with a mounting clamp. The mounting clamp is designed for handlebars with a diameter of 22, 28 mm or 1 inch. The clamp arm, which we developed, can be swiveled in two axes by up to 90° or 45°, making it easier to position in the cockpit - so the display is always in view without obscuring the view of the instruments. Versatile holder with 7.6 cm clamp arm and 1" adapter ball Rubber-covered retaining fingers for a secure hold A retaining rubber additionally secures the smartphone For smartphones with a width of 4.4 to 11.4 cm For smartphones with a maximum depth of 2.22 cm Suitable for the following vehicles Triumph Rocket 3 GT (19-), Y101 Triumph Rocket 3 R (19-), Y101 Details Material: stainless steel / plastic Color: silver / black Total weight: approx. 0,6 kg Scope of delivery 1 x RAM X-Grip IV clamp for large smartphones 1 x holding rubber 1 x clamp arm 1 x mounting clamp 1 x ball adapter 1 x mounting plate for mirror thread Mounting instructions Mounting material Note Particularly narrow devices (with minimum width 4.4 cm) must be higher than 14.6 cm The use of a waterproof protective cover is recommended. The smartphone with protective cover must not exceed the specifications for maximum width and depth.
SW-Motech Navi mount Universal Kit T-Lock for Triumph Rocket 3 GT /R - SW Motech
SW-MOTECH universal kit offers a variety of different mounting options on the motorcycle: The included 1 inch ball can be mounted on a M6 or M8 thread, on the mirror thread holder as well as with a mounting clamp. The mounting clamp is designed for handlebars with a diameter of 22, 28 mm or 1 inch. A pivoting clamp arm facilitates positioning in the cockpit - so the display always remains in view without obscuring the view of the instruments. The T-Lock holder included in the scope of delivery enables quick attachment of device cases such as Navi Case and Phone Case to the Universal Navi Kit. With a quarter turn clockwise, the bag can be fixed to the clamping arm. T-Lock holder for quick attachment to the clamp arm Balls and 2 inch clamp arm allow individual positioning Clamping arm can be swiveled around two axes by up to 90° and 45° respectively 1 inch ball can be mounted on a M6 or M8 thread, on the mirror thread holder or also with a mounting clamp Mounting clamp for handlebars with a diameter of 22, 28 mm or 1 inch Suitable for the following vehicles Triumph Rocket 3 GT (19-), Y101 Triumph Rocket 3 R (19-), Y101 Details Total weight: approx. 0,4 kg Scope of delivery 1 x mounting clamp with rubber inserts 1 x ball with M8 thread and M6 adapter 1 x holder for mounting on mirror thread 1 x 2" clamping arm 1 x ball joint with mounting plate 1 x T-Lock holder Mounting instructions Mounting material
