BMC sports air filter for Triumph Street Triple 765 (18-)
The BMC standard air filters are made from the best materials and guarantee a much higher air flow rate than conventional paper filters. The comprehensive know-how from racing is used in the production of the performance-optimized filters and each one meets the highest requirements. For example, the frame of the filters cannot break, the filtering, reusable cotton fabric is impregnated with a special oil and the aluminum mesh is resistant to gasoline vapors and oxidation thanks to treatment with an epoxy solution. Why choose BMC? Better than OEM filters Better than synthetic filters Better than other cotton filters Highest quality Rigorous testing procedures Ecological and economical Winner in all categories BMC is active in numerous sectors: Automotive, racing, aviation, marine and industrial, always in accordance with the specific regulations and requirements of each of these sectors. Accordingly, BMC tests extremely rigorously and accurately to ensure that its air filters are of the highest possible quality. The technical solutions applied by BMC are derived from the results of continuous and intensive laboratory testing. BMC carries out filtration tests in accordance with the international standards for air filters (ISO 5011). BMC air filters have a filtration efficiency of 98.5 percent.BMC's filter frame construction is manufactured in a unique process called "full molding". This allows the striking red filter to be produced in a single molding process without the need to glue the corners, which would cause breakage. Of all the filters available on the market, the BMC air filter has the least overhanging rubber material (less than 6 mm), thus maximizing the filter surface area.Take a look at our YouVideo:
C-Bow bag holder for Triumph Street Triple 765 S/R/RS (17-) Hepco & Becker
solid side carrier for mounting Hepco&Becker C-Bow side bags and panniers high quality surface finish normal Hepco&Becker hard cases, like the Junior or Journey do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended load: 5kg per bag/case (please refer to the mounting instructions, vehicle specific instructions, as well as motorcycle manufacturer information for any restrictions that may occur) can usually be combined with top case carriers, sissy bars or solo racks without any problems (please observe the mounting instructions or the vehicle-specific instructions for the respective carrier) Luggage rack extensions can restrict the mounting of bags on the rack Luggage carriers do not require ABE or registration in the papers Scope of delivery: left+ right + mounting instructions + mounting kit Developed for the standard condition of the machine. Not tested with accessories such as: exhaust, license plate holder or other turn signals. Note that with third-party accessories, the bags always have sufficient distance to the exhaust and the turn signals have a sufficient beam angle. The exhaust beam must not be directed at the bags.
Crash pads for Triumph Street Triple 765 / R - Barracuda
The Barracuda crash pads are specially manufactured for the respective motorcycle models and can be mounted on the motorcycle without additional modification. The scope of delivery includes the right and left crash pad and a vehicle-specific screw set. The plastic pad with anodized aluminum spacers is resistant and durable. Colored inserts are available for visual enhancement (Art.nr. BC-TA-INSERT: silver, black, gold, green, blue and red - please order separately, see "Additional items" tab), with which you can individualize your crash pads and color-match them to your motorcycle.
Crash pads for Triumph Street Triple 765 S/R/RS (17-) Hepco & Becker
Crash pads for Triumph Street Triple 765 S/R/RS (17-) Hepco & Becker
Flat superbike handlebar LSL XN1
X-Bar handlebars 28.6mm in the clamping area / 22.2mm at the endsThe X-Bar handlebars impress with a double bending stiffness compared to standard handlebars.This is the result of the design with a 28.6mm thick diameter in the clamping area and the use of a high-strength aluminum alloy.The handlebar bounces less and offers more reserves under extreme load.Available in a variety of colors.Incl. ABE for many current motorcycles. Please check if your vehicle is registered in the ABE or in the parts certificate and if additional mounting parts (e.g. clamping blocks) are required (see document).For some models a preliminary required manufacturer's confirmation is available. ABE: DOWNLOAD HERESuitable vehicles: ManufacturerModelChassis numberYear of manufacture fromYear until Aprilia Shiver 900 KH000 2017 2017 Aprilia Shiver 900 KH000 2018 2018 Aprilia Shiver 900 2019 2019 Aprilia Tuono 1100 V4 Factory KGA00 2017 2017 Aprilia Tuono 1100 V4 Factory KGA00 2018 2018 Aprilia Tuono 1100 V4 Factory KGA00 2019 2019 Aprilia Tuono 1100 V4 RR KG000 2017 2017 Aprilia Tuono 1100 V4 RR KG000 2018 2018 Aprilia Tuono 1100 V4 RR KG000 2019 2019 BMW F 700 GS ABS 4G80/K70 2017 2017 BMW F 800 GS E8GS/K72 2017 2017 BMW G 310 R 5R31/K03 2016 2016 BMW G 310 R 5R31/K03 2017 2017 BMW G 310 R 5R31/K03 2018 2018 BMW G 310 R 5R31/K03 2019 2019 Ducati Scrambler Desert Sled KE35DS/KB00A 2017 2017 Ducati Scrambler Desert Sled KE35DS/KB00A 2018 2018 Honda CB 1000 R Neo Sports Cafe SC80A 2019 2019 Honda CB 1000 RA Neo Sports Cafe SC80A 2018 2018 Honda CB 300 R Neo Sports Cafe NC55 2018 2018 Honda CB 300 R Neo Sports Cafe 2019 2019 Honda CB 500 FA PC63A 2019 2019 Kawasaki Ninja 650 EX650K 2017 2017 Kawasaki Ninja 650 EX650K 2018 2018 Kawasaki Ninja 650 EX650KKDA 2019 2019 Kawasaki Z 900 RS ZR900CCA 2018 2018 Kawasaki Z 900 RS ZR900CCA 2019 2019 KTM 690 Duke ABS --- 2016 2016 KTM 690 Duke ABS 2017 2017 KTM 690 Duke R ABS --- 2016 2016 KTM 690 Duke R ABS 2017 2017 KTM 690 SMC R ABS LC4 2017 2017 KTM 790 Duke 2018 2018 KTM 790 Duke 2019 2019 Moto Guzzi V7 III Anniversario LDE00 2017 2017 Moto Guzzi V7 III Anniversario LDE00 2018 2018 Moto Guzzi V7 III Carbon LDG00 2019 2019 Moto Guzzi V7 III ie Carbon LDG00 2018 2018 Moto Guzzi V7 III ie Carbon LDG00 2019 2019 Moto Guzzi V7 III Limited 2019 2019 Moto Guzzi V7 III Milano 2019 2019 Moto Guzzi V7 III Milano ABS LDM00 2018 2018 Moto Guzzi V7 III Racer LDB00 2017 2017 Moto Guzzi V7 III Racer LDB00 2018 2018 Moto Guzzi V7 III Racer 2019 2019 Moto Guzzi V7 III Rough LDM00 2018 2018 Moto Guzzi V7 III Rough LDM00 2019 2019 Moto Guzzi V7 III Special LDA00 2017 2017 Moto Guzzi V7 III Special LDA00 2018 2018 Moto Guzzi V7 III Special LDA00 2019 2019 Moto Guzzi V7 III Stone LD000 2017 2018 Suzuki GSX-S 1000 DG1122 2017 2017 Suzuki GSX-S 1000 DG3222 2018 2018 Suzuki GSX-S 1000 DG3222 2019 2019 Suzuki GSX-S 1000 F DG1144 2017 2017 Suzuki GSX-S 1000 F DG3244 2018 2018 Suzuki GSX-S 1000 F DG3244 2019 2019 Triumph 1050 Speed Triple 515NV 2011 2011 Triumph 1050 Speed Triple 515NV 2012 2012 Triumph 1050 Speed Triple ABS 515NV 2013 2013 Triumph 1050 Speed Triple ABS 515NV 2014 2014 Triumph 1050 Speed Triple ABS 515NV 2015 2015 Triumph 1050 Speed Triple R NN01 2016 2016 Triumph 1050 Speed Triple R NN01 2017 2017 Triumph 1050 Speed Triple R ABS 515NV 2012 2012 Triumph 1050 Speed Triple R ABS 515NV 2013 2013 Triumph 1050 Speed Triple R ABS 515NV 2014 2014 Triumph 1050 Speed Triple R ABS 515NV 2015 2015 Triumph 1050 Speed Triple S NN01 2016 2016 Triumph 1050 Speed Triple S NN01 2017 2017 Triumph 675 Street Triple R L67LR 2017 2017 Triumph 765 Street Triple R HD01 2017 2017 Triumph 765 Street Triple R HD01A 2018 2018 Triumph 765 Street Triple R HD01A 2019 2019 Triumph 765 Street Triple RS HD01 2017 2017 Triumph 765 Street Triple RS HD01/A 2018 2018 Triumph 765 Street Triple RS HD01A 2019 2019 Triumph Speed Twin 1200 DP01 2019 2019 Triumph Street Scrambler DC01 2017 2017 Triumph Street Scrambler DC01 2018 2018 Triumph Street Scrambler DC03/R 2019 2019 Triumph Tiger 800 A08 2011 2011 Triumph Tiger 800 A08 2012 2012 Triumph Tiger 800 A08 2013 2013 Triumph Tiger 800 ABS A08 2011 2011 Triumph Tiger 800 ABS A08 2012 2012 Triumph Tiger 800 ABS A08 2013 2013 Triumph Tiger 800 ABS A08 2014 2014 Triumph Tiger 800 XC A08 2011 2011 Triumph Tiger 800 XC A08 2012 2012 Triumph Tiger 800 XC A08 2013 2013 Triumph Tiger 800 XC ABS A08 2011 2011 Triumph Tiger 800 XC ABS A08 2012 2012 Triumph Tiger 800 XC ABS A08 2013 2013 Triumph Tiger 800 XC ABS A08 2014 2014 Yamaha MT 125 RE114 2014 2014 Yamaha MT 125 RE114 2015 2015 Yamaha MT 125 RE114 2016 2016 Yamaha MT 125 A RE292 2017 2017 Yamaha MT 125 A RE292 2019 2019 Yamaha MT 125 A ABS RE115 2014 2014 Yamaha MT 125 A ABS RE115 2015 2015 Yamaha MT 125 A ABS RE115 2016 2016 Yamaha MT 125 A ABS RE292 2018 2018 Yamaha MT-07 RM17 2017 2017 Yamaha MT-09 RN435 2017 2017 Yamaha MT-09 RN435 2018 2018 Yamaha MT-09 2019 2019 Yamaha XSR 900 RN431 2016 2016 Yamaha XSR 900 RN431 2017 2017 Yamaha XSR 900 2018 2018 Yamaha XSR 900 2019 2019
Kellermann turn signal, Rhombus Dark, steel, LED, VL/HR, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus Dark Top quality Made in Germany ECE approved for front and rear More visibility for more safety Heavily tinted glass with impressive brightness M8 x 20 thread Flexible mounting Equipped with patented Kellermann HighPower LED technology Long Life Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 12 Volt vehicle electrical systems With replaceable silent rubber adapter, protects from damage a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: Rhombus DarkBulb type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, Rhombus Dark, steel, LED, VR/HL, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus Dark Top quality Made in Germany ECE approved for front and rear More visibility for more safety Heavily tinted glass with impressive brightness M8 x 20 thread Flexible mounting Equipped with patented Kellermann HighPower LED technology Long Life Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 12 Volt vehicle electrical systems With replaceable silent rubber adapter, protects from damage a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front right / rear leftExpert opinion: E-approvedTurn signal model: Rhombus DarkIlluminant type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, Rhombus Extreme, Alu, LED, VL/HR, 12 V, shiny chrome, M8x20, E-tested
Kellermann Rhombus Extreme ECE approved for front and rear Extreme light output Kellermann HighPower LED technology High quality metal housing Longlife Protection Guard®, IC controlled, 330 kHz clocked Suitable for 12 Volt DC vehicle electrical systems With M8x20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration and vandalism a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: aluminumColor: chromeComponent lighting: turn signalOptical property: glossyShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: Rhombus ExtremeBulb type: LEDVolt: 12 VThread: M8x20Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white Light
Kellermann turn signal, Rhombus Extreme, steel, LED, VL/HR, 12 V, black satin, M8x20, E-approved
Kellermann Rhombus Extreme ECE approved for front and rear Extreme light output Kellermann HighPower LED technology High quality metal housing Longlife Protection Guard®, IC controlled, 330 kHz clocked Suitable for 12 Volt DC vehicle electrical systems With M8x20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration and vandalism a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: Rhombus ExtremeBulb type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white Light
Kellermann turn signal, Rhombus Extreme, steel, LED, VR/HL, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus Extreme ECE-approved for front and rear Extreme light output Kellermann HighPower LED technology High quality metal housing Longlife Protection Guard®, IC controlled, 330 kHz clocked Suitable for 12 Volt DC vehicle electrical systems With M8x20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration and vandalism a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front right / rear leftExpert opinion: E-approvedTurn signal model: Rhombus ExtremeBulb type: LEDVolt: 12 VThread: M8x20 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white Light
Kellermann turn signal, Rhombus Extreme, steel, LED, VR/HL, 12 V, shiny chrome, M8x20, E-tested
Kellermann Rhombus Extreme ECE-approved for front and rear Extreme light output Kellermann HighPower LED technology High quality metal housing Longlife Protection Guard®, IC controlled, 330 kHz clocked Suitable for 12 Volt DC vehicle electrical systems With M8x20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration and vandalism a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: chromeComponent lighting: turn signalOptical property: glossyShape: triangularPosition: front right / rear leftExpert opinion: E-approvedTurn signal model: Rhombus ExtremeBulb type: LEDVolt: 12 VThread: M8x20Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white Light
Kellermann turn signal, Rhombus PL, steel, LED, front left, 12 V, black satin, E-tested
Kellermann Rhombus PL ECE approved for front Increased safety through improved visibility Replace the existing parking/marker light and turn signals Sensational, new front optics Clear turn signal lens Kellermann HighPower LED technology Longlife Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 6 and 12 Volt DC wiring systems With M8x20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration and vandalism a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. The existing parking light must be deactivated. Main material: steelColor: blackMaterial property: powder coatedComponent Lighting: turn signalOptical property: satinShape: triangularPosition: front leftExpert opinion: E-approvedTurn signal model: Rhombus PLBulb type: LEDVolt: 12 V Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white Light
Kellermann turn signal, Rhombus PL, steel, LED, front right, 12 V, black satin, E-tested
Kellermann Rhombus PL ECE approved for front Increased safety through improved visibility Replace the existing parking/marker light and turn signals Sensational, new front optics Clear turn signal lens Kellermann HighPower LED technology Longlife Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 6 and 12 volt DC electrical systems With M8x20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration and vandalism a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. The existing parking light must be deactivated. Main material: steelColor: blackMaterial property: powder coatedComponent Lighting: turn signalOptical property: satinShape: triangularPosition: front rightExpert opinion: E-approvedTurn signal model: Rhombus PLBulb type: LEDVolt: 12 V Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white Light
Kellermann turn signal, Rhombus S Dark, aluminum, LED, VL/HR, 12 V, black satin, M5x0,5x6,5
Kellermann Rhombus S Dark ECE approved for front and rear strongly tinted glass - spectacularly bright Kellermann HighPower LED technology High quality metal housing Longlife Protection Guard®, IC controlled, 330 kHz clocked Suitable for 12 Volt DC vehicle electrical systems With M5 x 0.5 x 6.5 mm mounting thread European protected design Main material: aluminumColor: blackComponent lighting: turn signalOptical property: satinShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: Rhombus S DarkBulb type: LEDVolt: 12 VThread: M5x0,5x6,5 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, Rhombus S Dark, aluminum, LED, VR/HL, 12 V, black satin, M5x0,5x6,5
Kellermann Rhombus S Dark ECE approved for front and rear strongly tinted glass - spectacularly bright Kellermann HighPower LED technology High quality metal housing Longlife Protection Guard®, IC controlled, 330 kHz clocked Suitable for 12 Volt DC vehicle electrical systems With M5 x 0.5 x 6.5 mm mounting thread European protected design Main material: aluminumColor: blackComponent lighting: turn signalOptical property: satinShape: triangularPosition: front right / rear leftExpert opinion: E-approvedTurn signal model: Rhombus S DarkBulb type: LEDVolt: 12 VThread: M5x0,5x6,5 Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, rhombus, steel, LED, VL/HR, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus LED - Top quality Made in Germany- ECE approved for front and rear- More visibility for more safety- M8 x 20 thread- Clear glass- Flexible mounting- Equipped with patented Kellermann HighPower LED technology- Long Life Protection Guard®, IC controlled, 330 kHz clocked- High quality metal housing- Suitable for 6 and 12 volt vehicle electrical systems- With replaceable silent rubber adapter, protects against damage.May require load independent relay (133.123970) or power resistors to adjust flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: RhombusBulb type: LEDVolt: 12 VThread: M8x20Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, rhombus, steel, LED, VL/HR, 12 V, chrome matt, M8x20, E-approved
Kellermann Rhombus LED Top quality Made in Germany ECE approved for front and rear More visibility for more safety M8 x 20 thread Clear glass Flexible mounting Equipped with patented Kellermann HighPower LED technology Long Life Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 6 and 12 volt vehicle electrical systems With replaceable silent rubber adapter, protects against damage a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: chromeComponent lighting: turn signalOptical property: mattShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: RhombusBulb type: LEDVolt: 12 VThread: M8x20Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, rhombus, steel, LED, VL/HR, 12 V, shiny chrome, M8x20, E-tested
Kellermann Rhombus LED Top quality Made in Germany ECE approved for front and rear More visibility for more safety M8 x 20 thread Clear glass Flexible mounting Equipped with patented Kellermann HighPower LED technology Long Life Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 6 and 12 volt vehicle electrical systems With replaceable silent rubber adapter, protects against damage a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: chromeComponent lighting: turn signalOptical property: glossyShape: triangularPosition: front left / rear rightExpert opinion: E-approvedTurn signal model: RhombusBulb type: LEDVolt: 12 VThread: M8x20Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, rhombus, steel, LED, VR/HL, 12 V, black satin, M8x20, E-tested
Kellermann Rhombus LED - Top quality Made in Germany- ECE approved for front and rear- More visibility for more safety- M8 x 20 thread- Clear glass- Flexible mounting- Equipped with patented Kellermann HighPower LED technology- Long Life Protection Guard®, IC controlled, 330 kHz clocked- High quality metal housing- Suitable for 6 and 12 volt vehicle electrical systems- With replaceable silent rubber adapter, protects against damage.May require load independent relay (133.123970) or power resistors to adjust flashing frequency. Main material: steelColor: blackMaterial property: powder coatedComponent lighting: turn signalOptical property: satinShape: triangularPosition: front right / rear leftExpert opinion: E-approvedTurn signal model: RhombusBulb type: LEDVolt: 12 VThread: M8x20Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kellermann turn signal, rhombus, steel, LED, VR/HL, 12 V, shiny chrome, M8x20, E-approved
Kellermann Rhombus LED Top quality Made in Germany ECE approved for front and rear More visibility for more safety M8 x 20 thread Clear glass Flexible mounting Equipped with patented Kellermann HighPower LED technology Long Life Protection Guard®, IC controlled, 330 kHz clocked High quality metal housing Suitable for 6 and 12 volt vehicle electrical systems With replaceable silent rubber adapter, protects against damage a load-independent relay (133.123970) or power resistors may be required to adjust the flashing frequency. Main material: steelColor: chromeComponent lighting: turn signalOptical property: glossyShape: triangularPosition: front right / rear leftExpert opinion: E-testedTurn signal model: RhombusBulb type: LEDVolt: 12 VThread: M8x20Price per piece The Kellermann ABC:What do the abbreviations in the product name mean? BL > turn signal DF > triple function (turn signal, brake and rear light) hm > horizontal mounting PL > position light (in addition to the turn signal in front) RB > rear and brake light SG > single glass (handlebar end turn signal with only one glass) vm > vertical mounting WL > white light
Kriega US-Drypack mounting kit for Triumph Street Triple
The US drypack mounting kit is specially designed for the Triumph Street Triple 765 motorbike model. The kit consists of high-quality Hypalon™/nylon belt loops that can be attached under the pillion seat using the existing attachment points. Once fitted, they allow easy attachment of any size or combination of Kriega US drypacks. Scope of delivery 2x hypalon belt loops (95 mm, hole: 6 mm) 2x hypalon belt loops (65 mm, hole: 5 mm) 4x M6 washers 4x M5 washers Installation Remove the seat. Slide the M6 washers into the ends of the hypalon strap loops. Add an M6 washer to the top and fit the 95 mm loops to the underside of the seat using the existing seat belt bolts. Fit the 65 mm loops to the motorbike frame in the same way using the M5 washers and the existing bolts.
LeoVince exhaust system LV Pro, carbon, slip on for Triumph Street Triple 765 S /RS (18-21)
The LeoVince LV Pro in Carbon is the perfect combination of racing look and compactness. The LV Pro in Carbon is the result when the best materials and craftsmanship meet. The LV Pro in Carbon shows itself with its aggressively shaped end cap in total racing look. Together with the compact dimensions, this makes for a great aesthetic upgrade to the motorcycle. The muffler jacket made entirely of carbon fiber Flattened, oval shape Specially shaped end cap made of carbon Retaining clip made of carbon Manufacturer name lasered directly into the muffler Excellent price-performance ratio Suitable for the following models:Triumph Street Triple 765 S / SA2 / R /R LRH /RS (2018-2021). Also fits the 35kW version. Weight: 3.56 kg (-2.72 kg of the original exhaust system) Approval: ECE-ApprovedThe exhaust system is approved according to the noise directive ECE-R92. In addition, it also complies with EU Directive 134/2014, as the original catalytic converter is retained.
LeoVince exhaust system LV Pro, stainless steel, slip on for Triumph Street Triple 765 S /RS (18-21), Euro4
The LeoVince LV Pro in stainless steel is the perfect combination of racing look and compactness. The LV Pro Slip-On is the result when the best materials and craftsmanship meet. The LV Pro in stainless steel features a total racing look with its aggressively shaped end cap. Together with the compact dimensions, this makes for a great aesthetic upgrade to the motorcycle. Muffler shell made entirely of AISI 304 stainless steel Flattened oval shape Specially shaped carbon end cap Retaining clip made of carbon Muffler is sandblasted for a beautiful titanium look Manufacturer name lasered directly into the muffler Excellent price-performance ratio Suitable for the following models:Triumph Street Triple 765 S / SA2 / R / R LRH / RS (Bj.17-19). Also fits the 35kW version.Weight 3.78 kg (-2.50 kg of the original exhaust system) Approval: ECE-ApprovedThe exhaust system is approved according to the noise directive ECE-R92. In addition, it also complies with EU Directive 134/2014, as the original catalytic converter is retained.
License plate holder for Triumph Street Triple 765 / R - Barracuda
The Barracuda license plate holder for the Triumph Street Triple R is made of black anodized aluminum. The adjustable hinge is made of stainless steel for high strength and minimal vibration. The license plate holder comes with all the necessary screws for mounting. The mounting brackets for the turn signals are screwed in the German version and can be adjusted to the corresponding license plate size. The Barracuda license plate holder fits perfectly to the Barracuda turn signals. The mounting of the original turn signals is not possible. The license plate light (Art.nr. BC-N1002) and the reflector (Art.nr. BC-NCAT) are not included and must be ordered separately.
