alpha Technik Bremsscheibe Omega-Design ABD33, vorne für Yamaha YZF-R1, YZF-R6, TRM 900, XJ600, XT66
alpha Technik Bremsscheibe Omega-Design ABD33, vorne für Yamaha YZF-R1, YZF-R6, TRM 900, XJ600, XT660, XJR1300, XV950, alpha Technik Bremsscheibe ABD33 schwimmend (Da=300mm, Di=132,2mm, Lochkreis=150mm), Innenkranz Alu schwarz eloxiert, Außenring Stahl mit Omega-Design, mit ABE Produktkennzeichnung: Bremsentechnik Produkt Typ: alpha Technik Bremsscheibe ABD33 schwimmend
alpha Technik Drosselkit 21 kW für Yamaha WR250R/X, DG20
alpha Technik Drosselkit 21 kW für Yamaha WR250R/X, DG20 Gutachten auf 21kW für Yamaha WR250R / WR250X Fzg.Typ: DG20, ab Modelljahr 2008-, EG-BE-Nr.:e13*2002/24*0219*, mit Umbauteil Produktkennzeichnung: Leistungsänderung 25 kW Hinweis: Achtung: keine Maximalleistung möglich: Die Fahrerlaubnis der Klasse A berechtigt zum Führen von Krafträdern mit einer Nennleistung von nicht mehr als 25 kW und einem Verhältnis von Leistung/Leergewicht von nicht mehr als 0,16 kW/kg (=156,25 kg bei 25 kW/34 PS) Geänderte Fahrzeugteile: Drosselblende Auslaß Produkt Typ: Drosselkit 21 kW für Yamaha WR250R/X, DG20 Lieferumfang: TÜV Gutachten und Drosselteil für Leistungsreduzierung auf 21 kW
alpha Technik Lenkkopflagersatz SSY903T
alpha Technik Lenkkopflagersatz SSY903T Lenkkopflagersatz SSY903T bestehend aus hochpräzisen Kegelrollenlager und Abdichtungen Oberes Lager Innen/Außen/Höhe in mm 28 x 52 x 16,5 Unteres Lager Innen/Außen/Höhe in mm 30 x 52 x 16 Produktkennzeichnung: Fahrwerkstechnik Produkt Typ: Lenkkopflagersatz SSY903T
alpha Technik NTN Radlager 60/22-LLU
alpha Technik NTN Radlager 60/22-LLU NTN Radlager 60/22-LLU, 1 Stück, Made in Japan, beidseitig mit Gummi abgedichtetes Rillenkugellager für verschiedene Modelle Produktkennzeichnung: Fahrwerkstechnik Produkt Typ: NTN Radlager 60/22-LLU
ATHENA Easy MX cylinder-piston kit - Ø77mm Yamaha WR250X/R
OEM std bore cylinder Top end gasket kit
Factory Links Race Series wheel bearing set
FACTORY LINKS bearings are packed with a heavy-duty premium marine grease and an additive of a special complex thickener that allows it to be virtually waterproof. It provides unsurpassed rust and corrosion protection. Also to keep out any moisture, we've gone from a 30% grease fill to a 60% for harsh conditions. Our FACTORY LINKS ball bearings are specifically designed for on and off-road use, unlike industrial 2RS ball bearings which offer low torque resistance and therefore low resistance to water ingress.
Factory Links Race Series wheel bearing set
FACTORY LINKS bearings are packed with a heavy-duty premium marine grease and an additive of a special complex thickener that allows it to be virtually waterproof. It provides unsurpassed rust and corrosion protection. Also to keep out any moisture, we've gone from a 30% grease fill to a 60% for harsh conditions. Our FACTORY LINKS ball bearings are specifically designed for on and off-road use, unlike industrial 2RS ball bearings which offer low torque resistance and therefore low resistance to water ingress.
Factory Links steering head bearing kit Yamaha YZ/YZF
Steering Stem Bearing Service Kits Full Service Steering Stem OEM quality SetOEM type tapered Roller bearingsNBR Race Dust Seals
Factory Links wheel bearing set
FACTORY LINKS bearings are packed with a heavy duty premium marine grease and an addition of a special complex thickeners which allows it to be virtually waterproof. It provides unsurpassed rust and corrosion protection. Also to keep any moisture out, we have gone from 30% grease filling to a 60% for harsh conditions. Our FACTORY LINKS ball bearings are specially developed for an Off-Road use, unlike Industrial 2RS type ball bearings offer low torque resistance and hence weak resistance to water intrusion.
HIGHSIDER smart handlebar weights black OEM style, For various Yamaha (pair)
HIGHSIDER smart handlebar weight Black handlebar weight made of aluminum. Suitable for various Yamaha original handlebars, e.g. XJ6 Div. 2010, FZ 6 S2 ABS 2010, TDM 850 / 900, etc.Dimensions Diameter: 35 mmLength 35 mmThread: M16 x 1.5 mmScope of delivery: 1 pairNote: Please check the dimensions for accuracy of fit before purchasing!
PISTON RING FOR PISTON ATHENA 9616DA TE, TC 250 06-07 300CC
Stompgrip klar, Volcano, für Yamaha WR250R 2011-2020, WR250X 2008-2015
Stompgrip klar, Volcano, für Yamaha WR250R 2011-2020, WR250X 2008-2015 Stompgrip Tank Pad klar, Volcano, Streetbike Tank Kit - Tank Seiten, für Yamaha WR250R, Typ DG20, Modelljahr 2011-2020 WR250X, Typ DG20, Modelljahr 2008-2015 Produktkennzeichnung: Traktionspads SG Hinweis: Mehrteiliger Aufklebersatz für die Tankflanken, um mehr Halt beim Hanging-off zu gewährleisten. Produkt Typ: Stompgrip klar, Yamaha WR250R/X
Stompgrip schwarz, Volcano, für Yamaha WR250R 2011-2020, WR250X 2008-2015
Stompgrip schwarz, Volcano, für Yamaha WR250R 2011-2020, WR250X 2008-2015 Stompgrip Tank Pad schwarz, Volcano, Streetbike Tank Kit - Tank Seiten, für Yamaha WR250R, Typ DG20, Modelljahr 2011-2020 WR250X, Typ DG20, Modelljahr 2008-2015 Produktkennzeichnung: Traktionspads SG Hinweis: Mehrteiliger Aufklebersatz für die Tankflanken, um mehr Halt beim Hanging-off zu gewährleisten. Produkt Typ: Stompgrip schwarz, Yamaha WR250R/X
SW-Motech Drybag 180 rear bag for Yamaha WR 250 X, black / gray - SW Motech
The Drybag 180 is a functional rear bag that you can easily lash to the pillion seat or a luggage rack - whether lengthways or crossways. The bag has a welded-in base and an integrated carrying handle on the side. The Drybag 180 can be perfectly combined with the Drybag 350 - a popular luggage duo on many motorcycle trips around the world. Available in six sizes, SW Motech drybags enrich every motorcycle tour and offer a versatile luggage element with simple fastening technology. Thanks to the elastic PVC material, the bags can be rolled easily and transported compressed on the motorcycle regardless of the payload. The drybags are completely waterproof and highly UV-resistant. The new arrangement of the straps makes it easy to combine them with other drybag models on the pillion seat or luggage rack. Thanks to their simple design, the new drybags harmonize very well with the waterproof SysBag WP bags and the WP tank bags from the PRO line. Universal fit for almost all motorcycles Made from robust 500D PVC Waterproof, extremely robust luggage roll Easily compressible thanks to elastic texture D-rings allow the bag to be pulled tightly onto the motorcycle Integrated handle on the side Waterproof roll closure and taped seams Reflective details for greater safety on the road Scope of delivery 1 x Drybag 180 rear bag 4 x loop straps 1 x Paint protection film Fitting instructions Details Material: 500D polyester Surface: PVC-coated Color: black / grey Dimensions: 39.0 x 25.0 x 18.0 cm Total weight: approx. 0.9 kg Total volume: 18.0 l Notes Shoulder strap available separately. Outer pockets are splash-proof and not completely waterproof.
SW-Motech Drybag 260 rear bag for Yamaha WR 250 X, black / gray - SW Motech
Weatherproof rear and carry bag in one: The lightweight drybag is available in two sizes and can be easily attached to the rear carrier, pillion seat or other drybags. Extremely durable, absolutely waterproof and high UV resistance: SW Motech drybags are made of robust 500D polyester with double-sided coating and are particularly popular with motorcycle travelers who expose their luggage to extreme loads during a tour. The practical luggage rolls are best suited to any weather conditions, are easy to clean and are easy on the wallet to boot. Waterproof bag with roll closure Outside pocket with zipper are only splash-proof Waterproof, extremely robust luggage roll Waterproof roll closure and taped seams Reflective details for greater safety in road traffic Scope of delivery 1 x Drybag 260 tail bag 4 x loop straps 1 x shoulder strap Details Material: 500D Polyester Surface: PVC coated Color: grey / black Dimensions: 50,0 x 26,0 x 26,0 cm Total weight: approx. 1,2 kg Total volume: 26,0 l
SW-Motech Drybag 350 rear bag for Yamaha WR 250 X, black / gray - SW Motech
As a practical combination of rear bag and carry bag, the Drybag 350 offers both carrying comfort and 35 l of weatherproof and dustproof storage space on the motorcycle. The bag can be conveniently combined with other Drybag tail bags via clip adapters. With a tail bag in signal yellow and with reflective details, better visibility in road traffic is guaranteed. Extremely durable, absolutely waterproof and high UV resistance: SW Motech Drybags are made of robust 500D polyester with double-sided coating and are particularly popular with motorcycle travelers who subject their luggage to extreme loads during a tour. The practical luggage rolls are best suited to any weather conditions, are easy to clean and are also easy on the wallet. Universal fit for almost all motorcycles Comfortable carrying handles Easy to combine with other Drybags via clip adapter Includes 4 loop straps and 1 shoulder strap Secure and flexible four-point strap attachment Waterproof, extremely robust luggage roll Waterproof roll closure and taped seams Reflective details for increased safety on the road Made of robust 500D polyester with double-sided coating Suitable for BMW S 1000 R (13-16), K10 (K47) BMW S 1000 R (16-20), 2R10 (K47) BMW S 1000 R (16-20), 2R10r (K47) BMW S 1000 R (21-), 2R99 (K63) BMW S 1000 R (21-), 2R99r (K63) BMW S 1000 XR (15-16), K10 (K49) BMW S 1000 XR (16-19), 2X10 (K49) BMW S 1000 XR (19-), 2X99 (K69) Scope of delivery 1 x Drybag 350 tail bag 4 x loop straps 1 x shoulder strap Details Material: 500D Polyester Surface: PVC coated Color: signal yellow Dimensions: 58,0 x 28,0 x 28,0 cm Total weight: approx. 1,2 kg Total volume: 35,0 l
SW-Motech Drybag 350 rear bag for Yamaha WR 250 X, signal yellow - SW Motech
As a practical combination of rear bag and carry bag, the Drybag 350 offers both carrying comfort and 35 l of weatherproof and dustproof storage space on the motorcycle. The bag can be conveniently combined with other Drybag tail bags via clip adapters. With a tail bag in signal yellow and with reflective details, better visibility in road traffic is guaranteed. Extremely durable, absolutely waterproof and high UV resistance: SW Motech Drybags are made of robust 500D polyester with double-sided coating and are particularly popular with motorcycle travelers who subject their luggage to extreme loads during a tour. The practical luggage rolls are best suited to any weather conditions, are easy to clean and are also easy on the wallet. Universal fit for almost all motorcycles Comfortable carrying handles Easy to combine with other Drybags via clip adapter Includes 4 loop straps and 1 shoulder strap Secure and flexible four-point strap attachment Waterproof, extremely robust luggage roll Waterproof roll closure and taped seams Reflective details for increased safety on the road Made of robust 500D polyester with double-sided coating Suitable for BMW S 1000 R (13-16), K10 (K47) BMW S 1000 R (16-20), 2R10 (K47) BMW S 1000 R (16-20), 2R10r (K47) BMW S 1000 R (21-), 2R99 (K63) BMW S 1000 R (21-), 2R99r (K63) BMW S 1000 XR (15-16), K10 (K49) BMW S 1000 XR (16-19), 2X10 (K49) BMW S 1000 XR (19-), 2X99 (K69) Scope of delivery 1 x Drybag 350 tail bag 4 x loop straps 1 x shoulder strap Details Material: 500D Polyester Surface: PVC coated Color: signal yellow Dimensions: 58,0 x 28,0 x 28,0 cm Total weight: approx. 1,2 kg Total volume: 35,0 l
SW-Motech Drybag 80 rear bag for Yamaha WR 250 X, black / gray - SW Motech
The small Drybag 80 is the ultimate companion for your motorcycle adventure. It can be attached to the crash bar, the pillion seat or the luggage rack, where it reliably fulfills its purpose as a practical storage space for all areas of use. Alternatively, you can also lash the Drybag 80 onto larger models (from Drybag 350 upwards) or simply use it as a shoulder bag. Available in six sizes, SW Motech Drybags enrich every motorcycle tour and offer a versatile luggage element with simple fastening technology. Thanks to the elastic PVC material, the bags can be rolled easily and transported compressed on the motorcycle regardless of the load. The drybags are completely waterproof and highly UV-resistant. The new arrangement of the straps makes it easy to combine them with other drybag models on the pillion seat or the luggage rack. Thanks to their simple design, the new drybags harmonize very well with the waterproof SysBag WP bags and the WP tank bags from the PRO line. Welded outer pocket Universal fit for almost all motorcycles Made from robust 500D PVC Waterproof, extremely robust luggage roll Easily compressible thanks to elastic texture D-rings allow the bag to be pulled tightly onto the motorcycle Integrated handle on the side Waterproof roll closure and taped seams Reflective details for greater safety on the road For attachment to crash bars or on the pillion seat Scope of delivery 1 x Drybag 80 tail bag 2 x loop straps 1 x Paint protection film Fitting instructions Details Material: 500D polyester Surface: PVC-coated Color: black / grey Dimensions: 19.0 x 9.0 x 35.0 cm Total weight: approx. 0.6 kg Total volume: 8.0 l Notes Shoulder strap available separately.
