alpha Technik Drosselkit 25 kW für Yamaha XVS650, VM02
alpha Technik Drosselkit 25 kW für Yamaha XVS650, VM02 Gutachten 25 kW für Yamaha XVS650 Drag Star, Fzg.Typ: VM02, ab Modelljahr 1998, ABE-Nr. H943 Ausf. A1+A2, mit Umbauteilen Produktkennzeichnung: Leistungsänderung 25 kW Geänderte Fahrzeugteile: Ansaugblenden Produkt Typ: Drosselkit 25 kW für Yamaha XVS650, VM02 Lieferumfang: TÜV Gutachten und Drosselteile für Leistungsreduzierung auf 25 kW
alpha Technik Drosselkit 25 kW für Yamaha XVS650A, VM04
alpha Technik Drosselkit 25 kW für Yamaha XVS650A, VM04 Gutachten 25 kW für Yamaha XVS650A, Fzg.Typ: VM04, ab Modelljahr 2004, EG-BE-Nr.:e13*92/61*0080*, mit Umbauteilen Produktkennzeichnung: Leistungsänderung 25 kW Geänderte Fahrzeugteile: Ansaugblenden Produkt Typ: Drosselkit 25 kW für Yamaha XVS650A, VM04 Lieferumfang: TÜV Gutachten und Drosselteile für Leistungsreduzierung, (mit vorgedrucktem Typenschildaufkleber)
alpha Technik Drosselkit 25 kW für Yamaha XVS650S Classic, VM02
alpha Technik Drosselkit 25 kW für Yamaha XVS650S Classic, VM02 "Motorradland" Gutachten 25 kW für Yamaha XVS650 Classic, Fzg.Typ: VM02, ab Modelljahr 1997, mit ABE Nr. H943 von 29 kW, mit Umbauteilen Produktkennzeichnung: Leistungsänderung 25 kW Geänderte Fahrzeugteile: MOTORRADLAND: Drosselblenden Produkt Typ: Drosselkit 25 kW für Yamaha XVS650S Classic, VM02 Lieferumfang: TÜV Gutachten und Drosselteile für Leistungsreduzierung
alpha Technik Gabelwellendichtring Satz 41 x 53 x 8/10,5
alpha Technik Gabelwellendichtring Satz 41 x 53 x 8/10,5 ARI Simmerringsatz, Gabelwellendichtringe 41 x 53 x 8/10,5, mit Doppelfeder Produktkennzeichnung: Fahrwerkstechnik Produkt Typ: Gabelwellendichtring Satz 41 x 53 x 8/10,5
alpha Technik Koyo Radlager 6302-2RS
alpha Technik Koyo Radlager 6302-2RS Koyo Radlager 6302-2RS, 1 Stück, Made in Japan, beidseitig mit Kunststoff abgedichtetes Rillenkugellager für verschiedene Modelle Produktkennzeichnung: Fahrwerkstechnik Produkt Typ: Koyo Radlager 6302-2RS
Blinker BIHR orange, front / rear for: YAMAHA XV VIRAGO/XVS DRAGSTAR/XVZ ROYAL STAR
Dimensions and properties identical to standard component.
Electrosport regulator - Yamaha XVS650 Dragstar/V-Star
ElectroSport regulators are designed to be direct replacements to original equipment Manufactured to handle higher power loads Developed in the USAOne of the best value for money
Electrosport Stator - Yamaha XVS650/Classic/Dragstar
ElectroSport stators are designed to be direct replacements to original equipment Manufactured to handle higher power loads Developed in the USAOne of the best value for money
Factory Links steering head bearing kit Kawasaki/Suzuki/Yamaha
ContainsDust Seals x2, Tapered Roller x2Steering Stem Bearing Service Kits Full Service Steering Stem OEM quality Set OEM type tapered roller bearings NBR Race Dust Seals
HIGHSIDER pro Flat Track handlebars steel black
HIGHSIDER pro steel handlebars - 25.4 mm in the clamping area / 22.2 mm in the grip areaHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own selection of materials and the manufacturing quality of the handlebars, which has been optimized over decades.The handlebars in the 25.4/22.2 version impress with their high bending stiffness. The basis for this stability of the handlebars is the larger diameter in the clamping area. The reduction to the grip tube diameter takes place directly in front of the lever fittings.The diameter of the handlebars is 25.4 mm (3 mm wall thickness) in the clamping area and 22.2 mm (wall thickness 2 mm, inner Ø 18 mm) in the switch and grip fitting area.The surface is high-gloss polished and chrome-plated or black KTL-coated. The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.All HIGHSIDER pro handlebars are supplied with an ABE.The range of models is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, take a look at the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe off any dripping immediately with a clean cloth. avoid contact with brake fluid, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents in an inconspicuous area before use!- No guarantee or warranty is provided in the event of improper cleaning and care.
HIGHSIDER pro Flat Track handlebars steel chrome
HIGHSIDER pro steel handlebars - 25.4 mm in the clamping area / 22.2 mm in the grip areaHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and the manufacturing quality of the handlebars, which has been optimized over decades.The handlebars in the 25.4/22.2 version impress with their high bending stiffness. The basis for this stability of the handlebars is the larger diameter in the clamping area. The reduction to the grip tube diameter takes place directly in front of the lever fittings.The diameter of the handlebars is 25.4 mm (3 mm wall thickness) in the clamping area and 22.2 mm (wall thickness 2 mm, inner Ø 18 mm) in the switch and grip fitting area.The surface is high-gloss polished and chrome-plated or black KTL-coated. The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.All HIGHSIDER pro handlebars are supplied with an ABE.The range of models is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, take a look at the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe off any dripping immediately with a clean cloth. avoid contact with brake fluid, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents in an inconspicuous area before use!- No guarantee or warranty is given in the event of improper cleaning and care.
HIGHSIDER pro Flat Track L14 Handlebar Black 1 inch, 95 mm
HIGHSIDER pro steel handlebars in 1-inch HIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Flat Track L14 handlebar chrome 1 inch, 90 mm
HIGHSIDER pro steel handlebars in 1-inch HIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Old Style L12 handlebar chrome 1 inch, 95 mm
HIGHSIDER pro steel handlebars in 1-inch with H-D beadHIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Old Style L12 handlebars black 1 inch, 95 mm
HIGHSIDER pro steel handlebars in 1-inch with H-D beadHIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Roadster L01 handlebar black 1 inch, 90 mm
HIGHSIDER pro steel handlebars in 1-inch HIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Roadster L01 Handlebar Black 1 inch, For HD, 95 mm
HIGHSIDER pro steel handlebars in 1-inch with H-D beadHIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Roadster L01 Handlebar Chrome 1 inch, For HD, 95 mm
HIGHSIDER pro steel handlebars in 1-inch with H-D beadHIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Street Bar L00 Handlebar Black 1 inch
HIGHSIDER pro steel handlebars in 1-inch HIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Wide Bar L11 handlebar steel chrome, 1 inch, 95 -D
HIGHSIDER pro steel handlebars in 1-inch with H-D beadHIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER pro Wide Bar L11 handlebars, steel, black, 1 inch, 95 -D
HIGHSIDER pro steel handlebars in 1-inch with H-D beadHIGHSIDER pro stands for outstanding handlebar quality. Of course, this also applies to the wide and heavy versions of the inch handlebars.The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated.The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure the best possible position of the holes from the standard handlebars.For use on Harley models, a version with a pressed-in cut-out for the cable routing (H-D bead) is available.All HIGHSIDER pro handlebars are supplied with ABE.The model range is huge and is expanded every year with new entries.The ABE reliably documents which handlebar type fits and is approved on the motorcycle.As a rule, the assignments in the ABE are without conditions.However, there are also exceptions.Therefore, check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!- No guarantee or warranty in the event of improper cleaning and care.
HIGHSIDER smart handlebar weights black OEM style, For various Yamaha (pair)
HIGHSIDER smart handlebar weight Black handlebar weight made of aluminum. Suitable for various Yamaha original handlebars, e.g. XJ6 Div. 2010, FZ 6 S2 ABS 2010, TDM 850 / 900, etc.Dimensions Diameter: 35 mmLength 35 mmThread: M16 x 1.5 mmScope of delivery: 1 pairNote: Please check the dimensions for accuracy of fit before purchasing!
HIGHSIDER smart mounting plates Indy Spacer Black
HIGHSIDER mounting plates INDY SPACER, aluminum- Suitable for Harley-Davidson®, Suzuki, Yamaha, Honda models - e.g.H-D Dyna, FXR, Custom, Softail, Sportster, VRSCSuzuki C/VLR 1800 Intruder, LS 650 Savage, M/VZ 1500 Intruder, VS 600/700/750/800/1400 Intruder, VZ 800 MarauderYamaha XVS 650/1100 DragsterHonda VT 750/1100 ShadowIf original indicators are replaced with LED, halogen or incandescent minior incandescent mini indicators, an unsightly gap often remains. The HIGHSIDER aluminum mounting plates cover these gaps so that no large cut-outs remain.Dimensions:Hole diameter: 8 mmWidth: 22 mmLength: 46.5 mmThickness: 2 mmMaterial: aluminumColor: blackScope of delivery: 2 piecesNote:Please always check the dimensions specified by us for accuracy of fit before purchasing.
