Filter by motorcycle model:
Bushing rim 12"/13", rear wheel for Vespa GTS/GTS Super/GTV/GT 60/GT/GT L 125-300ccm
When converting the GTS models to the 13" MP3 rims, complications usually arise at the rear wheel. The standard bushing on the drive shaft between wheel hub and rim is not compatible with the front wheel rim of the PIAGGIO MP3. The only thing that helps is turning off the original bushing. Who wants to save the time or has no possibility to work on this bushing professionally, should fall back on the SIP bushing. This is exactly adapted to the required diameter and can be mounted plug & play. Simply replaced by the original rear wheel bushing, the new rear wheel can be mounted immediately. When mounting the SIP rims 12 "/ 13 "this bushing is also needed on the rear wheel.
Decor set Wheel stickers rim bed for Aprilia RS 660 / Tuono 660
Precisely fitting decorative strips for gluing into the rim well for an even sportier look. - UV-resistant decor kit to stick on.
Front aluminum rim for Aprilia RSV4 / Tuono V4 1000/1100
Forged aluminum rim. Thanks to a highly developed manufacturing process, the rim for the TUONO is lighter than the original rim. Forged aluminum rim 1.7 kilos lighter than the original rim
Mounting kit for mounting rims on ABS model for Vespa, rear
for Vespa for Vespa GTS/GTS Super/GTV 125-300cc ('14-) For models that are equipped with ABS on the rear wheel as standard, the change to rims from the accessories has always been difficult, often there were problems with the installation of the rear tone wheel. With the SIP bolt kit, these problems are a thing of the past. In the twinkling of an eye, the rims of the "non-ABS" models such as SIP, ZELIONI or even PIAGGIO rims can be mounted, the ABS tone wheel can be screwed to the special wheel nuts with internal thread. Possibly the ABS sensor can drag on the tone wheel, for this we supply two small M5 washers, these simply come to the screw between ABS sensor and swing arm. Consisting of PIAGGIO screws Mounting instructions: Fix the rim with the five new wheel nuts (bolts with hexagon head, internal thread) and the five M8 washers Screw the ABS tone wheel to the internal threads of the wheel nuts using the five M5 Torx screws and the five M5 corrugated washers Now mount the swing arm again The distance of the ABS sensor to the tone wheel should be at least 0,4mm according to PIAGGIO. If the distance is smaller or if the tone wheel rubs against the sensor, one or two of the supplied M5 washers must be placed on the sensor mounting screw between the ABS sensor and the swing arm to create sufficient distance to the tone wheel. CAUTION: The distance should not be too large, otherwise no signal can be picked up.
Rear aluminum rim for Aprilia RSV4 / Tuono V4 1000/1100
Forged aluminum rim. Thanks to a highly developed manufacturing process, the rim for the TUONO is lighter than the original rim. Forged aluminum rim Weight: 2.4 kg 1.7 kilos lighter than the original rim
Rim Black for Vespa Sprint
Sporty rim in the look of the new Vespa Sprint, black / polished. This article fits the following 6 vehicles: Manufacturer Model Type Engine capacity Chassis Vespa Vespa Sprint 4 T 4 V , 2014 50 ZAPC 53101 Vespa Vespa Sprint 2 T AC , 2014 50 ZAPC 53201 Vespa Vespa Sprint 4 T , AC , Euro 3 , 2014 125 RP8M82111 Vespa Vespa Sprint 4 T , AC , Euro 3 , 2014 125 ZAPM 81300 Vespa Vespa Sprint 4 T , AC , Euro 3 , 2014 125 ZAPM 81301 Vespa Vespa Sprint Sport 2 T AC , 2015 50 ZAPC 53201
Rim Comb 1 front/rear for Vespa GTS/GTS Super/GTV/GT/946 125-300cc, silver
front/rear 3.00 -12" silver
Rim Comb 2 front/rear 12" for Vespa GTS/GTS Super/GTV/GT/946 125-300cc, black matt
front or rear 3.00 Ø 12" Aluminum black matt
Rim Comb 2 front/rear 12" for Vespa GTS/GTS Super/GTV/GT/946 125-300ccm, black glossy
front or rear 3.00 Ø 12" Aluminum black glossy
Rim Comb 3 front/rear 12" for Vespa GTS/GTS Super/GTV/GT/946 125-300cc, black
High quality forged aluminum rim from ZELIONI. Absolute high-end product with perfect surface finish, forged rim, surface CNC machined and laser engraved ZELIONI logo. Additionally reduced weight. The original valve can not be reused. We recommend the screwable valves from ZELIONI (part no. ZELV01MB) or G-Pro. (part no. MV597680) front or rear 3.00 Ø 12" Aluminum black Mounting instructions Vespa GTS models with ABS: For models that are equipped with ABS on the rear wheel as standard, a mounting kit (part no. MV000617) including new wheel bolts and screws for the tone wheel is required. This must be ordered at the same time.
Rim Comb 3 front/rear 12" for Vespa GTS/GTS Super/GTV/GT/946 125-300ccm, silver
High quality forged aluminum rim from ZELIONI. Absolute high-end product with perfect surface finish, forged rim, surface CNC machined and laser engraved ZELIONI logo. Additionally reduced weight. The original valve can not be reused. We recommend the screwable valves from ZELIONI (part no. ZELV01MB) or G-Pro. (part no. MV597680) front or rear 3.00 Ø 12" Aluminum silver Mounting instructions for Vespa GTS models with ABS: For models equipped with ABS as standard on the rear wheel, a mounting kit (Item No. MV000617) including new wheel bolts and screws for the tone wheel is required. This must be ordered at the same time.
Rim decor "Sport Allure" for Vespa Sprint
Stylish rim stickers from the "Sport Allure" series for the Vespa Sprint.
Rim front/rear 12" for Vespa GTS/GTS Super/GTV/GT 125-300cc, black with silver rim
The rim can be mounted front & rear plug & play. It fits all tires up to 140 width. The rims themselves are manufactured in compliance with ETRTO (European Tyre and Rim Technical Organisation) guidelines, the industry specification for rim and tire production. front/rear 3.00 -12" 10 spokes Aluminum black with silver rim for rear additional mounting kit is needed with ABE KBA 53421 The rim is approved for the following tire sizes: Tire size front: 120/70-12 in combination with Tire size rear 120-70/12 ww.130/70-12 ww. 140/70-12 Front tire size: 130/70-12 in conjunction with Rear tire size 130-70/12 ww. 140/70-12 When using the tire 140/70-12" a tire approval of the respective tire manufacturer has to be presented. In the download area we provide in the ABE document all permissible tires including the required tire release. The latest version of the ABE can be found in the downloads. Please check before buying if the ABE is valid for the desired vehicle. Note: By changing the tire size also changes the gear ratio of the tires which ultimately leads to a deviation of the speedometer display. Since the original speedometer deviates by up to 10% from the real value, the deviation is still within the tolerance for 12" rims with 140 tires as well as 13" rims with max. 140 tires. Actually, this is even advantageous, because with the larger tires, the speedometer display approaches the real speed Mounting instructions: Front wheel: plug & play. No additional mounting kit is required. Rear wheel: For rear mounting, the bushing (part no.MV848039) is always required. For models that are equipped with ABS on the rear wheel as standard, a mounting kit (part no. MV000617) including new wheel bolts and screws for the tone wheel is required. The items are not included and must be ordered separately. After mounting the rims on ABS models, the ABS/ASR system should be recalibrated. Detailed instructions are available in the download area or in the vehicle owner's manual.
Rim front/rear 12" for Vespa GTS/GTS Super/GTV/GT 60/GT/GT L 125-300cc, black matt
The rim can be mounted front & rear plug & play. It fits all tires up to 140 width. The rims themselves are manufactured in compliance with ETRTO (European Tyre and Rim Technical Organisation) guidelines, the industry specification for rim and tire production. front/rear 3.00 -12" 10 spokes Aluminum black matt for rear additional mounting kit is needed with ABE KBA 53421 The rim is approved for the following tire sizes: Tire size front: 120/70-12 in combination with Tire size rear 120-70/12 ww.130/70-12 ww. 140/70-12 Front tire size: 130/70-12 in conjunction with Rear tire size 130-70/12 ww. 140/70-12 When using the tire 140/70-12" a tire approval of the respective tire manufacturer has to be presented. In the download area we provide in the ABE document all permissible tires including the required tire release. The latest version of the ABE can be found in the downloads. Please check before buying if the ABE is valid for the desired vehicle. Note: By changing the tire size also changes the gear ratio of the tires which ultimately leads to a deviation of the speedometer display. Since the original speedometer deviates by up to 10% from the real value, the deviation is still within the tolerance for 12" rims with 140 tires as well as 13" rims with max. 140 tires. Actually, this is even advantageous, because with the larger tires, the speedometer display approaches the real speed Mounting instructions: Front wheel: plug & play. No additional mounting kit is required. Rear wheel: For rear mounting, the bushing (part no.MV848039) is always required. For models that are equipped with ABS on the rear wheel as standard, a mounting kit (part no. MV000617) including new wheel bolts and screws for the tone wheel is required. The items are not included and must be ordered separately. After mounting the rims on ABS models, the ABS/ASR system should be recalibrated. Detailed instructions are available in the download area or in the vehicle owner's manual.
Rim front/rear 12" for Vespa GTS/GTS Super/GTV/GT 60/GT/GT L 125-300cc, black matt/red
The rim can be mounted front & rear plug & play. It fits all tires up to 140 width. The rims themselves are manufactured in compliance with ETRTO (European Tyre and Rim Technical Organisation) guidelines, the industry specification for rim and tire production. front/rear 3.00 -12" 10 spokes Aluminum black matt/red for rear additional mounting kit is needed with ABE KBA 53421 The rim is approved for the following tire sizes: Tire size front: 120/70-12 in combination with Tire size rear 120-70/12 ww.130/70-12 ww. 140/70-12 Front tire size: 130/70-12 in conjunction with Rear tire size 130-70/12 ww. 140/70-12 When using the tire 140/70-12" a tire approval of the respective tire manufacturer has to be presented. In the download area we provide in the ABE document all permissible tires including the required tire release. The latest version of the ABE can be found in the downloads. Please check before buying if the ABE is valid for the desired vehicle. Note: By changing the tire size also changes the gear ratio of the tires which ultimately leads to a deviation of the speedometer display. Since the original speedometer deviates by up to 10% from the real value, the deviation is still within the tolerance for 12" rims with 140 tires as well as 13" rims with max. 140 tires. Actually, this is even advantageous, because with the larger tires, the speedometer display approaches the real speed Mounting instructions: Front wheel: plug & play. No additional mounting kit is required. Rear wheel: For rear mounting, the bushing (part no.MV848039) is always required. For models that are equipped with ABS on the rear wheel as standard, a mounting kit (part no. MV000617) including new wheel bolts and screws for the tone wheel is required. The items are not included and must be ordered separately. After mounting the rims on ABS models, the ABS/ASR system should be recalibrated. Detailed instructions are available in the download area or in the vehicle owner's manual.
Rim front/rear 12" for Vespa GTS/GTS Super/GTV/GT 60/GT/GT L 125-300cc, black/yellow
The rim can be mounted front & rear plug & play. It fits all tires up to 140 width. The rims themselves are manufactured in compliance with ETRTO (European Tyre and Rim Technical Organisation) guidelines, the industry specification for rim and tire production. front/rear 3.00 -12" 10 spokes Aluminum black/yellow for rear additional mounting kit is needed with ABE KBA 53421 The rim is approved for the following tire sizes: Tire size front: 120/70-12 in combination with Tire size rear 120-70/12 ww.130/70-12 ww. 140/70-12 Front tire size: 130/70-12 in conjunction with Rear tire size 130-70/12 ww. 140/70-12 When using the tire 140/70-12" a tire approval of the respective tire manufacturer has to be presented. In the download area we provide in the ABE document all permissible tires including the required tire release. The latest version of the ABE can be found in the downloads. Please check before buying if the ABE is valid for the desired vehicle. Note: By changing the tire size also changes the gear ratio of the tires which ultimately leads to a deviation of the speedometer display. Since the original speedometer deviates by up to 10% from the real value, the deviation is still within the tolerance for 12" rims with 140 tires as well as 13" rims with max. 140 tires. Actually, this is even advantageous, because with the larger tires, the speedometer display approaches the real speed Mounting instructions: Front wheel: plug & play. No additional mounting kit is required. Rear wheel: For rear mounting, the bushing (part no.MV848039) is always required. For models that are equipped with ABS on the rear wheel as standard, a mounting kit (part no. MV000617) including new wheel bolts and screws for the tone wheel is required. The items are not included and must be ordered separately. After mounting the rims on ABS models, the ABS/ASR system should be recalibrated. Detailed instructions are available in the download area or in the vehicle owner's manual.
Rim front/rear 12" for Vespa GTS/GTS Super/GTV/GT 60/GT/GT L 125-300cc, bronze matt
The rim can be mounted front & rear plug & play. It fits all tires up to 140er width. The rims themselves are manufactured in accordance with ETRTO (European Tyre and Rim Technical Organisation) guidelines, the industry standard for rim and tire production. front/rear 3.00 Ø 12" 10 spokes Aluminum bronze matt for rear additional mounting kit is needed with ABE KBA 53421 The rim is approved for the following tire sizes: Tire size front: 120/70-12 in combination with Rear tire size 120-70/12 ww.130/70-12 ww. 140/70-12 Front tire size: 130/70-12 in conjunction with Rear tire size 130-70/12 ww. 140/70-12 When using the tire 140/70-12" a tire approval of the respective tire manufacturer has to be presented. In the download area we provide in the ABE document all permissible tires including the required tire release. The latest version of the ABE can be found in the downloads. Please check before buying if the ABE is valid for the desired vehicle. Note: By changing the tire size also changes the gear ratio of the tires which ultimately leads to a deviation of the speedometer display. Since the original speedometer deviates by up to 10% from the real value, the deviation is still within the tolerance for 12" rims with 140 tires as well as 13" rims with max. 140 tires. Actually, this is even advantageous, because with the larger tires, the speedometer display approaches the real speed Mounting instructions: Front wheel: plug & play. No additional mounting kit is required. Rear wheel: For mounting rear is always the bushing (Art.-Nr.MV848039) needed. For models that are equipped with ABS as standard on the rear wheel, a mounting kit (part no.MV000617) including new wheel bolts and screws for the tone wheel is required. The items are not included and must be ordered separately. After mounting the rims on ABS models, the ABS/ASR system should be recalibrated. Detailed instructions are available in the download area or in the user manual of the vehicle.
Rim front/rear 12" for Vespa GTS/GTS Super/GTV/GT 60/GT/GT L 125-300ccm, black glossy
The rim can be mounted front & rear plug & play. It fits all tires up to 140er width. The rims themselves are manufactured in accordance with ETRTO (European Tyre and Rim Technical Organisation) guidelines, the industry standard for rim and tire production. front/rear 3.00 Ø 12" 10 spokes Aluminum black glossy for rear additional mounting kit is needed with ABE KBA 53421 The rim is approved for the following tire sizes: Tire size front: 120/70-12 in combination with Tire size rear 120-70/12 ww.130/70-12 ww. 140/70-12 Front tire size: 130/70-12 in conjunction with Rear tire size 130-70/12 ww. 140/70-12 When using the tire 140/70-12" a tire approval of the respective tire manufacturer has to be presented. In the download area we provide in the ABE document all permissible tires including the required tire release. The latest version of the ABE can be found in the downloads. Please check before buying if the ABE is valid for the desired vehicle. Note: By changing the tire size also changes the gear ratio of the tires which ultimately leads to a deviation of the speedometer display. Since the original speedometer deviates by up to 10% from the real value, the deviation is still within the tolerance for 12" rims with 140 tires as well as 13" rims with max. 140 tires. Actually, this is even advantageous, because with the larger tires, the speedometer display approaches the real speed Mounting instructions: Front wheel: plug & play. No additional mounting kit is required. Rear wheel: For mounting rear is always the bushing (Art.-Nr.MV848039) needed. For models that are equipped with ABS as standard on the rear wheel, a mounting kit (part no.MV000617) including new wheel bolts and screws for the tone wheel is required. The items are not included and must be ordered separately. After mounting the rims on ABS models, the ABS/ASR system should be recalibrated. Detailed instructions are available in the download area or in the user manual of the vehicle.
Rim front/rear 12" for Vespa GTS/GTS Super/GTV/GT 60/GT/GT L 125-300ccm, silver
The rim can be mounted front & rear plug & play. It fits all tires up to 140 width. The rims themselves are manufactured in compliance with ETRTO (European Tyre and Rim Technical Organisation) guidelines, the industry specification for rim and tire production. front/rear 3.00 -12" 10 spokes Aluminum silver for rear additional mounting kit is needed with ABE KBA 53421 The rim is approved for the following tire sizes: Tire size front: 120/70-12 in combination with Tire size rear 120-70/12 ww.130/70-12 ww. 140/70-12 Front tire size: 130/70-12 in conjunction with Rear tire size 130-70/12 ww. 140/70-12 When using the tire 140/70-12" a tire approval of the respective tire manufacturer has to be presented. In the download area we provide in the ABE document all permissible tires including the required tire release. The latest version of the ABE can be found in the downloads. Please check before buying if the ABE is valid for the desired vehicle. Note: By changing the tire size also changes the gear ratio of the tires which ultimately leads to a deviation of the speedometer display. Since the original speedometer deviates by up to 10% from the real value, the deviation is still within the tolerance for 12" rims with 140 tires as well as 13" rims with max. 140 tires. Actually, this is even advantageous, because with the larger tires, the speedometer display approaches the real speed Mounting instructions: Front wheel: plug & play. No additional mounting kit is required. Rear wheel: For rear mounting, the bushing (part no.MV848039) is always required. For models that are equipped with ABS on the rear wheel as standard, a mounting kit (part no. MV000617) including new wheel bolts and screws for the tone wheel is required. The items are not included and must be ordered separately. After mounting the rims on ABS models, the ABS/ASR system should be recalibrated. Detailed instructions are available in the download area or in the vehicle owner's manual.
Rim front/rear 13" for Vespa GTS/GTS Super/GTV/GT 125-300cc, black with silver rim
First existing 13" rim which may be driven with the ABE without problems on the GTS. No more legal grey areas, no more arguments with the TÜV inspectors - install the rims and the legal conversion to 13" is done. Also homologated with a 140 wide tire on the rear wheel - instead of the standard 130 tire, a 140/60-13" size tire can now be legally driven on the rear. The rims themselves are manufactured in compliance with the ETRTO (European Tyre and Rim Technical Organisation) guidelines, the industry specification for rim and tire production. front/rear 3.00 -13" 10 spokes Aluminum black with silver rim for rear additional mounting kit is needed with ABE KBA 53352 The rim is approved for the following tire sizes: Tire size front: 110/70-13 in combination with Tire size rear: 110/70-13 ww. 120/70-13 ww. 130/60-13 ww. 130/70-13 ww. 140/60-1 Tire size front: 120/70-13 in combination with Rear tire size: 120/70-13 ww. 130/60-13 ww. 130/70-13 ww. 140/60-13 Tire size front: 130/60-13 in combination with Rear tire size: 130/60-13 ww. 130/70-13 ww. 140/60-13 Tire size front: 130/70-13 in combination with Rear tire size: 130/70-13 ww. 140/60-13 Tire size front: 140/60-13 in combination with Rear tire size: 140/60-13 When using the tire 140/60-13" a tire approval of the respective tire manufacturer has to be presented. In the download area we provide in the ABE document all permissible tires including the required tire release. The latest version of the ABE can be found in the downloads. Please check before buying if the ABE is valid for the desired vehicle. Note: By changing the tire size also changes the gear ratio of the tires which ultimately leads to a deviation of the speedometer display. Since the original speedometer deviates by up to 10% from the real value, the deviation is still within the tolerance for 12" rims with 140 tires as well as 13" rims with max. 140 tires. Actually, this is even advantageous, because with the larger tires, the speedometer display approaches the real speed Mounting instructions: Front wheel: plug & play. No additional mounting kit is required. Rear wheel: For rear mounting, the bushing (part no.MV848039) is always required. For models that are equipped with ABS on the rear wheel as standard, a mounting kit (part no. MV000617) including new wheel bolts and screws for the tone wheel is required. The items are not included and must be ordered separately. After mounting the rims on ABS models, the ABS/ASR system should be recalibrated. Detailed instructions are available in the download area or in the user manual of the vehicle.
Rim front/rear 13" for Vespa GTS/GTS Super/GTV/GT 60/GT/GT L 125-300cc, black matt
First existing 13" rim which may be driven with the ABE without problems on the GTS. No more legal grey areas, no more arguments with the TÜV inspectors - install the rims and the legal conversion to 13" is done. Also homologated with a 140 wide tire on the rear wheel - instead of the standard 130 tire, a 140/60-13" size tire can now be legally driven on the rear. The rims themselves are manufactured in compliance with the ETRTO (European Tyre and Rim Technical Organisation) guidelines, the industry specification for rim and tire production. front/rear 3.00 -13" 10 spokes Aluminum black matt for rear additional mounting kit is needed with ABE KBA 53352 The rim is approved for the following tire sizes: Tire size front: 110/70-13 in combination with Tire size rear: 110/70-13 ww. 120/70-13 ww. 130/60-13 ww. 130/70-13 ww. 140/60-1 Tire size front: 120/70-13 in combination with Rear tire size: 120/70-13 ww. 130/60-13 ww. 130/70-13 ww. 140/60-13 Tire size front: 130/60-13 in combination with Rear tire size: 130/60-13 ww. 130/70-13 ww. 140/60-13 Tire size front: 130/70-13 in combination with Rear tire size: 130/70-13 ww. 140/60-13 Tire size front: 140/60-13 in combination with Rear tire size: 140/60-13 When using the tire 140/60-13" a tire approval of the respective tire manufacturer has to be presented. In the download area we provide in the ABE document all permissible tires including the required tire release. The latest version of the ABE can be found in the downloads. Please check before buying if the ABE is valid for the desired vehicle. Note: By changing the tire size also changes the gear ratio of the tires which ultimately leads to a deviation of the speedometer display. Since the original speedometer deviates by up to 10% from the real value, the deviation is still within the tolerance for 12" rims with 140 tires as well as 13" rims with max. 140 tires. Actually, this is even advantageous, because with the larger tires, the speedometer display approaches the real speed Mounting instructions: Front wheel: plug & play. No additional mounting kit is required. Rear wheel: For rear mounting, the bushing (part no.MV848039) is always required. For models that are equipped with ABS on the rear wheel as standard, a mounting kit (part no. MV000617) including new wheel bolts and screws for the tone wheel is required. The items are not included and must be ordered separately. After mounting the rims on ABS models, the ABS/ASR system should be recalibrated. Detailed instructions are available in the download area or in the user manual of the vehicle.
Rim front/rear 13" for Vespa GTS/GTS Super/GTV/GT 60/GT/GT L 125-300cc, black matt/red
First existing 13" rim which may be driven with the ABE without problems on the GTS. No more legal grey areas, no more arguments with the TÜV inspectors - install the rims and the legal conversion to 13" is done. Also homologated with a 140 wide tire on the rear wheel - instead of the standard 130 tire, a 140/60-13" size tire can now be legally driven on the rear. The rims themselves are manufactured in compliance with the ETRTO (European Tyre and Rim Technical Organisation) guidelines, the industry specification for rim and tire production. front/rear 3.00 -13" 10 spokes Aluminum black matt/red for rear additional mounting kit is needed with ABE KBA 53352 The rim is approved for the following tire sizes: Tire size front: 110/70-13 in combination with Tire size rear: 110/70-13 ww. 120/70-13 ww. 130/60-13 ww. 130/70-13 ww. 140/60-1 Tire size front: 120/70-13 in combination with Rear tire size: 120/70-13 ww. 130/60-13 ww. 130/70-13 ww. 140/60-13 Tire size front: 130/60-13 in combination with Rear tire size: 130/60-13 ww. 130/70-13 ww. 140/60-13 Tire size front: 130/70-13 in combination with Rear tire size: 130/70-13 ww. 140/60-13 Tire size front: 140/60-13 in combination with Rear tire size: 140/60-13 When using the tire 140/60-13" a tire approval of the respective tire manufacturer has to be presented. In the download area we provide in the ABE document all permissible tires including the required tire release. The latest version of the ABE can be found in the downloads. Please check before buying if the ABE is valid for the desired vehicle. Note: By changing the tire size also changes the gear ratio of the tires which ultimately leads to a deviation of the speedometer display. Since the original speedometer deviates by up to 10% from the real value, the deviation is still within the tolerance for 12" rims with 140 tires as well as 13" rims with max. 140 tires. Actually, this is even advantageous, because with the larger tires, the speedometer display approaches the real speed Mounting instructions: Front wheel: plug & play. No additional mounting kit is required. Rear wheel: For rear mounting, the bushing (part no.MV848039) is always required. For models that are equipped with ABS on the rear wheel as standard, a mounting kit (part no. MV000617) including new wheel bolts and screws for the tone wheel is required. The items are not included and must be ordered separately. After mounting the rims on ABS models, the ABS/ASR system should be recalibrated. Detailed instructions are available in the download area or in the user manual of the vehicle.
Rim front/rear 13" for Vespa GTS/GTS Super/GTV/GT 60/GT/GT L 125-300cc, black/yellow
First existing 13" rim which may be driven with the ABE without problems on the GTS. No more legal grey areas, no more arguments with the TÜV inspectors - install the rims and the legal conversion to 13" is done. Also homologated with a 140 wide tire on the rear wheel - instead of the standard 130 tire, a 140/60-13" size tire can now be legally driven on the rear. The rims themselves are manufactured in compliance with the ETRTO (European Tyre and Rim Technical Organisation) guidelines, the industry specification for rim and tire production. front/rear 3.00 -13" 10 spokes Aluminum black/yellow for rear additional mounting kit is needed with ABE KBA 53352 The rim is approved for the following tire sizes: Tire size front: 110/70-13 in combination with Tire size rear: 110/70-13 ww. 120/70-13 ww. 130/60-13 ww. 130/70-13 ww. 140/60-1 Tire size front: 120/70-13 in combination with Rear tire size: 120/70-13 ww. 130/60-13 ww. 130/70-13 ww. 140/60-13 Tire size front: 130/60-13 in combination with Rear tire size: 130/60-13 ww. 130/70-13 ww. 140/60-13 Tire size front: 130/70-13 in combination with Rear tire size: 130/70-13 ww. 140/60-13 Tire size front: 140/60-13 in combination with Rear tire size: 140/60-13 When using the tire 140/60-13" a tire approval of the respective tire manufacturer has to be presented. In the download area we provide in the ABE document all permissible tires including the required tire release. The latest version of the ABE can be found in the downloads. Please check before buying if the ABE is valid for the desired vehicle. Note: By changing the tire size also changes the gear ratio of the tires which ultimately leads to a deviation of the speedometer display. Since the original speedometer deviates by up to 10% from the real value, the deviation is still within the tolerance for 12" rims with 140 tires as well as 13" rims with max. 140 tires. Actually, this is even advantageous, because with the larger tires, the speedometer display approaches the real speed Mounting instructions: Front wheel: plug & play. No additional mounting kit is required. Rear wheel: For rear mounting, the bushing (part no.MV848039) is always required. For models that are equipped with ABS on the rear wheel as standard, a mounting kit (part no. MV000617) including new wheel bolts and screws for the tone wheel is required. The items are not included and must be ordered separately. After mounting the rims on ABS models, the ABS/ASR system should be recalibrated. Detailed instructions are available in the download area or in the user manual of the vehicle.
Rim front/rear 13" for Vespa GTS/GTS Super/GTV/GT 60/GT/GT L 125-300ccm, black glossy
First existing 13" rim which may be driven with the ABE without problems on the GTS. No more legal gray areas, no arguments with the TÜV inspectors - install rims and ready is the legal conversion to 13 ". Also homologated with a 140 wide tire on the rear wheel - instead of the standard 130 tire, a 140/60-13" size tire can now be legally driven on the rear. The rims themselves are manufactured in compliance with ETRTO (European Tyre and Rim Technical Organisation) guidelines, the industry standard for rim and tire production. front/rear 3.00 Ø 13" 10 spokes Aluminum black glossy for rear additional mounting kit is needed with ABE KBA 53352 The rim is approved for the following tire sizes: Tire size front: 110/70-13 in combination with Rear tire size: 110/70-13 ww. 120/70-13 ww. 130/60-13 ww. 130/70-13 ww. 140/60-13 Tire size front: 120/70-13 in combination with Rear tire size: 120/70-13 ww.130/60-13 ww. 130/70-13 ww. 140/60-13 Front tire size: 130/60-13 in conjunction with Rear tire size: 130/60-13 ww. 130/70-13 ww. 140/60-13 Tire size front: 130/70-13 in combination with Rear tire size: 130/70-13 ww. 140/60-13 Tire size front: 140/60-13 in combination with Rear tire size: 140/60-13 When using the tire 140/60-13" a tire approval of the respective tire manufacturer has to be presented. In the download area we provide in the ABE document all permissible tires including the required tire release. The latest version of the ABE can be found in the downloads. Please check before buying if the ABE is valid for the desired vehicle. Note: By changing the tire size also changes the gear ratio of the tires which ultimately leads to a deviation of the speedometer display. Since the original speedometer deviates by up to 10% from the real value, the deviation is still within the tolerance for 12" rims with 140 tires as well as 13" rims with max. 140 tires. Actually, this is even advantageous, because with the larger tires, the speedometer display approaches the real speed Mounting instructions: Front wheel: plug & play. No additional mounting kit is required. Rear wheel: For mounting rear is always the socket (Art.-Nr.MV848039) needed. For models that are equipped with ABS as standard on the rear wheel, a mounting kit (part no.MV000617) including new wheel bolts and screws for the tone wheel is required. The items are not included and must be ordered separately. After mounting the rims on ABS models, the ABS/ASR system should be recalibrated. Detailed instructions are available in the download area or in the user manual of the vehicle.
