MT-09 /SP 2021-2023 (RN69, MTN890)

The 3P side mounting system was developed specifically for the SH23, SH35 and SH36 side cases. During the development phase, in addition to the aesthetic aspects, the focus was above all on safety. Integrated design: The 3P fastening system optimally adapts to the contours of the vehicle. The typical rectangular frame has been reduced to a single arm that supports the three points (3P) used to attach the cases. Position: both the volume of the pannier and the angle of the 3P system have been designed to move the weight of the luggage as far as possible to the center of the motorcycle. This allows for greater safety and stability when riding with a full load. Aerodynamics: the use of 3 points gives stability and flexibility at the same time. This is achieved by a slight swing of the case. It therefore allows air to circulate easily around this case, avoiding the so-called angular effect of a typical flat and rigid case. Again, the better result is obtained in terms of safety and stability during the journey. Patented: The uniqueness and technical innovation of the 3P system have allowed SHAD to patent it. This makes SHAD the only manufacturer that can offer this fastening system.  

Stylish tank pad for Hyper Naked models. Glossy with exclusive Dark Side of Japan logo and design. Prevents fuel tank scratches from rider's pants Improved grip for riding in extreme conditions The perfect complement to your Yamaha Exclusive design with modern carbon look and Dark Side of Japan logo Original Yamaha design Fits for: MT-09 SP '18 MT-09 '17 '18 '19

High-quality billet brake fluid reservoir cover for Yamaha motorcycles. Gives your Yamaha a particularly cool and stylish touch. High quality cover with black anodized finish to replace the original brake fluid reservoir cover. Perfect complement to other optional anodized billet components from our accessories catalog. Easy to fit for a quick and uncomplicated upgrade of your bike. From Gilles Tooling, from the original Yamaha accessories catalog. Upgrade your Yamaha now with this exclusive accessory and attract attention! High-quality cover with black anodized finish to replace the original brake fluid reservoir cover. Gives your Yamaha a particularly cool and stylish touch Perfect complement to other optional anodized billet components from our accessories catalogue From Gilles Tooling from the original Yamaha accessories catalog. Easy mounting

High quality covers to protect the front axle ends. Front axle covers with sporty look Gives your Yamaha even more elegance and a cool look; especially in combination with the rear axle covers Relief structure with center section in aluminum From Gilles.Tooling

Would you like to improve the look of your Yamaha and give it a personal touch? Then the billet rear brake master cylinder cover from Original Yamaha is just the thing for you! With three differently colored rings in silver, blue and red, you can create your own style. The special design by Gilles.Tooling ensures that your Yamaha stands out even more. Installation is child's play and the product comes directly from the original Yamaha accessories catalog. Get the billet rear brake master cylinder cover now and give your motorcycle a unique touch. Make your Yamaha an eye-catcher on the road! Improves the look of your Yamaha With three different colored rings - silver, blue and red - for your own individual style Special design for your Yamaha From Gilles.Tooling Easy to fit From the original Yamaha accessories catalog

The basic mount for a navigation device from Yamaha is the perfect accessory for motorcyclists who want to mount their GPS device safely and conveniently. With this bracket, you can easily attach most GPS mounting systems and always have your navigation device in view. Thanks to the simple installation on the triple clamp next to the speedometer, you can quickly attach the mount and start riding straight away. The high-quality material ensures that your navigation device is held securely, even in bumpy road conditions. This basic bracket comes directly from the original Yamaha accessories catalog and impresses not only with its functionality, but also with its attractive design. Make sure you always find the right route and experience unforgettable adventures with your motorcycle and the Yamaha navigation device holder. Buy now and never get lost again! Basic mount for a navigation device Can hold most GPS mounting systems for motorcycles Installs on the triple clamp next to the speedometer so the rider can see it clearly Easy to mount simple installation From the original Yamaha accessories catalog

Discover the innovative soft bag mounts for your Yamaha MT-09 (model year 21-23). With special brackets to attach the optional Yamaha side bags, you are perfectly equipped for your adventures. Thanks to the intelligently designed quick-release system, you can easily mount the brackets and quickly remove the tubes if necessary. The lightweight design ensures that your riding experience is not compromised. The simple assembly and disassembly makes using the softbag holders a breeze. Get the soft bag mounts for your Yamaha MT-09 now and enjoy maximum functionality and style on your tours. Become part of the Yamaha family and experience the ultimate riding pleasure! The special brackets are required to attach the Yamaha side bags (ymessbag0010) available as accessories. The tubes can be removed if required Quick locking system Lightweight design Quick and easy assembly and disassembly Original Yamaha accessories

Add a special touch to your Yamaha with the milled handlebar ends for the MT-09 (21-) from Original Yamaha. These custom handlebar ends are not only a visual highlight, but also impress with their functionality. With the same weight as the original part, they provide effective vibration damping and thus offer a pleasant riding experience. The modern design without a visible center bolt gives your motorcycle a classy look. The high-quality workmanship from Gilles.Tooling guarantees durability and a perfect fit. These handlebar ends are from the original Yamaha accessories catalog and are therefore perfectly matched to your Yamaha. With the milled handlebar ends for the Yamaha MT-09 (21-), you will not only be an eye-catcher on the road, you will also feel the difference in performance. Get these exclusive accessories now and give your motorcycle that little bit extra it deserves. Treat yourself to these high-quality handlebar ends and experience a new riding experience with your Yamaha! Custom handlebar ends give your Yamaha a special touch. Fully functional - same weight as original part for vibration damping Modern design with no visible center screw From Gilles.Tooling From the original Yamaha accessories catalog Easy installation

Discover the tank pad for the Yamaha MT-09! With its included Yamaha logo and special “Stealth Camo” texture, this tank pad not only protects against scratches from the zipper but is also a stylish accessory for your Yamaha. Show off your unique style while ensuring your motorcycle always stays in top condition. Get the tank pad now and make a statement on the road! Includes Yamaha logo Protects your Yamaha from scratches caused by the zipper Special “Stealth Camo” texture Genuine Yamaha accessory

The Billet oil filler plug is the perfect accessory to give your Yamaha a unique and stylish touch. The CNC-machined design, featuring a laser-engraved Gilles Tooling logo, makes this oil filler plug a real eye-catcher. Easy assembly using the standard tool included in the package ensures a quick and hassle-free installation. Plus, the plug is compatible with optional accent rings in different colors, so you can customize your XSR to suit your personal taste. With this genuine Yamaha accessory, your XSR will be enhanced not only technically but also visually. Treat yourself and your bike to this high-quality upgrade! Custom oil filler plug—replaces the original—gives your XSR a unique style. CNC-milled design with laser-engraved Gilles Tooling logo Easy installation with standard tools (included) Compatible with optional color accent rings for customization Genuine Yamaha accessory

The side grip pads for the MT-09 (model years 21-23) from Original Yamaha are a must-have for every motorcyclist. With their shiny design and the exclusive "Dark Side of Japan" logo, they not only offer a stylish look, but also protect the tank sides from scratches and damage. The robust rubber material ensures maximum grip and control while riding. The durable 3M adhesive guarantees a secure attachment that is ready for use after 24 hours of curing time. The integrated MT logo combines style with functionality and makes these grip pads a real eye-catcher. Easy to fit and made from original Yamaha accessories, these side grip pads are the perfect addition to your MT-09. Get them now and experience a new level of comfort and safety on every ride! Shiny, with exclusive "Dark Side of Japan" logo and design. Protects the tank sides from the chassis Robust rubber material for maximum grip and control Adhesive must cure for 24 hours before using the vehicle Stylish MT logo with functional tank grip purpose Durable 3M adhesive Integrated design Genuine Yamaha accessory Easy installation

The tank pad for the Yamaha MT-09 is a must-have for every motorcyclist. With its sporty design, it not only protects against scratches but also gives your bike a cool look. The rubberized texture ensures maximum protection, and the 3M VHB adhesive backing guarantees easy installation. The sporty 3D design featuring the YAMAHA logo makes this tank pad a real head-turner. Pair it with the optional matching side grip pads for an even more polished look. Treat your bike to the best and get the Original Yamaha tank pad now! Details: Sporty design that protects against scratches. Pairs perfectly with the optional matching side grip pads Rubberized texture for maximum protection 3M VHB adhesive Sporty 3D design with the YAMAHA logo Genuine Yamaha accessories

The rear axle covers for your Yamaha are high-quality covers that effectively protect the rear axle ends. With their sporty design, they give your motorcycle a dynamic look. The impact-absorbing surface is made entirely of CNC-machined POM, ensuring high quality and durability. Get these covers now and protect your rear axle in style! Details: High-quality covers to protect the rear axle ends. Rear axle covers with a sporty look Impact-absorbing surface made entirely of CNC-machined POM Genuine Yamaha accessories

  Discover the stylish lever guard set for the Yamaha MT-09 (Bj.21-) Original Yamaha. This exclusive accessory not only offers elegant protection for your clutch and brake levers, but also a high-quality finish made from machined aluminum. Thanks to the simple installation, it is easy to fit this stylish extension to your motorcycle. The original Yamaha accessories also guarantee a perfect fit and quality.With the lever guard set, you not only give your Yamaha a personal touch, but also ensure additional safety on the road. Show style and class with this high-quality product and enjoy every ride on your motorcycle even more. Get the lever guard set for the MT-09 (Bj.21-) Original Yamaha now and turn your bike into a real eye-catcher on the road! Stylish protection for the clutch and brake levers Machined from aluminum Stylish and exclusive extension for your Yamaha Easy mounting Original Yamaha accessories

Experience a lightweight and high-strength upgrade for your motorcycle with the machined aluminum passenger footpegs for your Yamaha. Enjoy the improved stability and modern design of this accessory. Perfect for anyone who appreciates quality and performance. Get it now and make your ride even more enjoyable! Milled from solid aluminum Lighter than standard footrests Tighter than standard footrests Easy to fit Original Yamaha accessories

The brake fluid reservoir kit for MT-09 / Tracer 9 / XSR 900 GP from Yamaha is a high-quality accessory that gives your motorcycle a stylish look. The black aluminum cap is CNC machined and easy to install. With this original Yamaha accessory, you can upgrade your motorcycle in no time at all. Treat yourself to this upgrade for your machine and enjoy the high-quality workmanship and elegant design. Stylish cosmetic black aluminum cap for the front brake fluid reservoir CNC machined aluminum Very easy and quick to install Genuine Yamaha accessories

The high-quality chain tensioner for the MT-09 / Tracer 9 / XSR 900 (2021 and later) from Original Yamaha is an essential accessory for your motorcycle. With this chain adjuster, you can adjust the chain tension precisely and easily while the blocks remain in the swingarm and the axle is removed. The effortless adjustment makes it easy to fine-tune the chain, turning wheel changes into a breeze. In addition, this accessory features the Gilles Tooling and MT logos to give your bike a personalized touch. Get this genuine Yamaha chain tensioner now and optimize your motorcycle’s performance! High-quality chain tensioner that replaces the original. The blocks remain in the swingarm while the axle is removed Gilles Tooling and MT logos Precise and easy adjustment of chain tension Makes wheel changes easier Precise and effortless chain adjustment Genuine Yamaha accessories from Gilles Tooling

Immerse yourself in a new dimension of riding with the footrest system for the Yamaha MT-09 / Tracer 9 / XSR 900. With a fully adjustable set and double-ball-bearing shift and brake levers, you’ll experience ultimate control and comfort on your rides. The easy positioning of the footrests via the precise adjustment slider allows you to customize them to your needs. Thanks to the 12-way footrest adjustment, you can find the perfect position for yourself, while the color-coordinated design harmonizes with other accessories and your Yamaha. The window in the base plate and the laser engraving not only make the system highly visible but also give it an elegant touch. To complete the set, all you need is the colored finish kit (B7NFRSFN0000). Genuine Yamaha accessories guarantee the highest quality and a perfect fit for your motorcycle. Ignite your passion for riding with this innovative footrest system and enjoy every turn with style and precision. Treat yourself to the best for your bike—you deserve it! Fully adjustable footrest set for changing the position of the original footrests. Double-ball-bearing shift and brake levers Comfortable and easily adjustable slider position Easy footrest positioning via a precise adjustment slider Color-matched to other accessories and your Yamaha 12-position footrest adjustment Easily visible through a window in the base plate and laser engraving Genuine Yamaha accessories Compatible with the following models: MT-09 (21-23) Tracer 9 /GT (21–24) XSR 900 (22-23) Important Note: Requires a color finish kit (B7NFRSFN0000) for complete installation

The elegant aluminum radiator shroud in black for the MT-09 (Bj.21-) from Original Yamaha is the perfect accessory to protect your bike and enhance its styling. With a high-quality, durable finish, this stylish radiator cover offers protection from small stones and dirt. Complement your bike with this original Yamaha accessory and give it a customized look. High-quality, durable finish Stylish aluminum radiator cover Protection against small stones / dirt Complements the styling of the bike Genuine Yamaha accessories Easy to fit

The elegant aluminum radiator shroud in silver for the MT-09 (Bj.21-) from Yamaha is the ideal accessory to protect your bike and improve its styling. With its high-quality and durable finish, it offers protection against small stones and dirt. Installation is quick and easy. Complete your bike with these original Yamaha accessories and ride the road in style and protection. Elegant aluminum radiator shroud as an alternative to the original part. High-quality, durable finish Stylish aluminum radiator cover Protection against small stones / dirt Complements the styling of the bike Easy to fit Genuine Yamaha accessories

Experience ultimate control and style with the high-quality black brake lever for the MT-09 / Tracer 9 / XSR 900 (Bj.21-) from Yamaha. This brake lever replaces the original and features laser-engraved Yamaha and Gilles Tooling logos. With its ideal lever length and optimal shape, it adapts perfectly to all grip styles. You can also purchase the colored accent pack separately to underline your personal style. The brake lever is adjustable up to 35 times, so you can customize it exactly to your needs. It is also compatible with other accessories for your Yamaha. Get the brake lever now and experience a completely new riding experience! High-quality brake lever, replaces the original. Ideal lever length for perfect control Laser-engraved YAMAHA and Gilles Tooling logos Optimal shape for all grip styles Alternative color accent pack available separately adjustable up to 35 times Customizable to other accessories and your YAMAHA Original Yamaha accessories

Upgrade your Yamaha MT-09 with the stylish license plate holder for model year 2021- . With its sporty and lightweight design, it gives your bike a modern look. The MT-09 logo on the holder shows your commitment to the Yamaha brand. The license plate holder is compatible with the standard indicators and optional LED indicators. The integrated LED license plate illumination ensures optimum visibility and complies with CE directives. Thanks to the holder for the standard reflector, you are also safe on the road at night. Fitting the license plate holder is child's play and can be done by yourself without any problems. Genuine Yamaha accessories guarantee you the best quality and a perfect fit.Upgrade your Yamaha now with the original Yamaha license plate holder for MT-09 and stand out from the crowd! Stylish license plate holder to replace the standard holder Sporty and lightweight design With MT-09 logo Compatible with the standard indicators and the optionally available LED indicators With bracket for standard rear reflector Integrated LED license plate light with CE marking Easy mounting

Making good bikes perfect. Following this motto, LSL has developed the license plate holder MANTIS-RS.It fits perfectly to your motorcycle and emphasizes the lines of your bike with its sporty design.And as usual, LSL has thought of everything.The model-specific bracket of the MANTIS-RS allows replacement without further drilling or cutting on the vehicle.The design fits perfectly to the rear of your bike and uses the original mounting points of the vehicle.Sharp-edged feedthroughs are protected with rubber membrane grommets against damage to the cables.The license plate is made of 2 mm thick sheet steel, laser-cut, edged and weather-resistant black powder-coated.The license plate is fixed in the correct position by an additional locking screw.The width-adjustable turn signal holders of the MANTIS-RS are suitable for any type of accessory turn signals. Through this adjustment option, you will find the right position for your turn signals. The adaptation to the most different EU license plates is therefore no problem. The mounting holes of the turn signals have a diameter of 10 mm and are slotted to the side. This makes it possible to mount the turn signals without disconnecting them from the wiring harness.The slider for mounting the rear reflector is also individually adjustable. An adjustment to the different designs of EU license plates is therefore no problem.The two rubber washers supplied are used for vibration-reducing bolting of the license plate. An additional rubber buffer supports the license plate on the underside.Details:- model-specific bracket- steplessly adjustable turn signal holder- slotted turn signal holder for easy mounting without cable separation- infinitely adjustable reflector, E-approved- suitable for european license plates- infinitely adjustable angle of inclination- additional screw for optimal position security- easy fixation without further work steps (e.g. drilling)- easy mounting of the license plate through slotted holesThe scope of delivery of the MANTIS-RS includes:- Model-related holder with mounting parts- MANTIS-RS license plate holder- Adjustable turn signal holders- E-tested reflector with adjustable holder- Mounting instructionsNotes:- A special turn signal holder is optionally available for the original turn signals in the accessories tab.- If side reflectors are mounted on your original license plate holder, they must be reattached in a suitable position or replaced with new ones.Tip:If you haven't found a model-specific license plate holder for your vehicle, you're sure to find what you're looking for in LSL's universal license plate holders, which are available in many different designs.

The HIGHSIDER license plate holder AKRON-RS fits through its design perfectly to the lines of your bike.The model-specific bracket of the AKRON-RS allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting.To avoid damage to cables, all sharp-edged feedthroughs are protected by a rubber membrane grommet.The license plate is made of sheet steel and 2 mm thick. Precise cutting is done by laser. After edging, the plate is given a weather-resistant black powder coating.This ensures an optimal fit and durability.The stepless adjustment allows you to bring the plate without drilling in the desired position. To keep the plate in this position, there is an additional locking screw.The turn signal holders of the AKRON-RS are adjustable in width and thus suitable for any type of accessory turn signals. This adjustability allows you to adjust the position for your turn signals to the most different license plates. To allow the installation of the turn signals without separation from the wiring harness, the 10 mm holes are slotted to the side.You can also adjust the position of the reflector individually via a slider. An adaptation to the different designs of EU license plates is therefore no problem.To screw the license plate securely and reduce vibrations, two rubber washers are included. Another rubber buffer supports the license plate on its underside.Details:- model-specific mount- infinitely adjustable turn signal holder- slotted turn signal holder for easy mounting without cable separation- infinitely adjustable reflector, E-approved- suitable for european license plates- infinitely adjustable angle of inclination- additional screw for optimal position security- easy fixation without further work steps (e.g. drilling)- easy mounting of the license plate through slotted holesThe scope of delivery of the AKRON-RS includes- Model-related holder with mounting parts- AKRON-RS license plate holder- Adjustable turn signal brackets- E-tested reflector with adjustable holder- Mounting instructionsNotes:- A special turn signal holder is optionally available for the original turn signals in the accessories tab.- If there are side reflectors mounted on your original license plate holder, they must be reattached in a suitable position or replaced with new ones.Tips:If you have not found a model-specific license plate holder for your vehicle, the universal license plate holders from HIGHSIDER, which are available in many different designs, are certainly a good alternative.