YZF R7 2021- (RM39)

Protection bar for the standard and optional billet front brake lever. Emphasizes the racing design of the model even more High-quality finish With YZF-R logo Exclusive individual design for Yamaha by Gilles.Tooling Easy to fit Perfect addition to the racing look in combination with the billet front brake lever  

Protection bar for the standard and optional billet clutch lever Emphasizes the racing design of the model even more High-quality workmanship Complies with national and international technical regulations in racing From Gilles.Tooling Including mounting parts Complement the racing look by combining with the front billet brake lever guard

Racing inspired high quality finished functional protectors on the rear axle ends, in case your Yamaha ever falls over. Gives your Yamaha an even more pronounced racing look; especially when used in conjunction with the front axle protection kit High-quality matte black anodizing with subtle color accents Determine your own color accent with the blue and bronze plates included in the kit Protective plug in axle end Complies with national and international racing technical regulations From Gilles.Tooling

The Original Yamaha LED Front Turn Signal Plus is the perfect choice for those who value safety and style. These sleek front turn signals feature a unique integrated position light for increased visibility on the road. Made from high quality material with a high quality finish, they are not only durable but also attractive to look at. With the E-mark and including a control resistor for the flashing frequency, these indicators offer everything you need to be safe on the road. They can easily be combined with the optional rear LED indicators Plus to customize the styling of your Yamaha to your personal taste. The exclusive design from GK Design has been specially developed for Yamaha and includes black and silver-colored housing caps and quick-fit connectors for easy installation. This 2-piece set from the original Yamaha accessories catalog should not be missing from any motorcycle. Treat yourself to more safety and style on the road with the LED indicators Plus front Original Yamaha. Elegant front indicators with unique integrated position light. High-quality material and high-quality finish With E-mark Including control resistor for the flashing frequency Can be combined with the optional rear LED indicators Plus More safety on the road thanks to position lights Available as a 2-piece set Exclusive design by GK Design especially for Yamaha Including black and silver-colored housing caps to match the styling of your Yamaha to your personal taste Includes quick-fit connectors Easy to install From the original Yamaha accessories catalog

Would you like to improve the look of your Yamaha and give it a personal touch? Then the billet rear brake master cylinder cover from Original Yamaha is just the thing for you! With three differently colored rings in silver, blue and red, you can create your own style. The special design by Gilles.Tooling ensures that your Yamaha stands out even more. Installation is child's play and the product comes directly from the original Yamaha accessories catalog. Get the billet rear brake master cylinder cover now and give your motorcycle a unique touch. Make your Yamaha an eye-catcher on the road! Improves the look of your Yamaha With three different colored rings - silver, blue and red - for your own individual style Special design for your Yamaha From Gilles.Tooling Easy to fit From the original Yamaha accessories catalog

Discover the stylish turn signals from GK Design, developed exclusively for Yamaha. With their unique design, they’re the perfect replacement for boring standard turn signals. Thanks to the adjustable resistor, you can customize the flashing speed to your liking. Each turn signal features 9 high-performance LEDs that ensure excellent visibility. The 55 cm cable with heat-shrink sleeve makes installation easy. The set includes 1 right turn signal and 1 left turn signal. Experience the original Yamaha LED turn signal set and turn your motorcycle into a real head-turner! Exclusive design by GK Design specifically for Yamaha Includes a resistor to adjust the flashing speed 9 LEDs per turn signal 55 cm long cable with heat-shrink sleeve Available as a 2-piece set (1x right turn signal, 1x left turn signal) Also compatible with the following scooter models: T-MAX (20-21) Tricity 300 (20-25)  

Immerse yourself in the world of racing with the MotoGP-inspired billet mounting hooks for stands from Yamaha. These unique hooks allow you to lift your bike effortlessly and safely with the optional racing stand. The functional MotoGP-style design gives your bike a sporty look, while the high-quality matt black finish adds a classy touch. The chain guide attachment in the left strut is practical and effective. The Yamaha logo is proudly emblazoned on the hooks to emphasize the quality and originality of the product. The simple installation guarantees uncomplicated attachment to your motorcycle. This accessory comes directly from the original Yamaha accessories catalog and bears the name Billet mounting hook for mounting stand, rear Original Yamaha. Awaken desire and emotion in yourself by adding this exclusive product to your repertoire. Let yourself be inspired by the fascination of racing and treat yourself to the best for your bike. With Yamaha's Billet mounting hooks, you'll always be well equipped for exciting adventures on the road or race track. Grab it and experience the world of motorsport up close! MotoGP-inspired lifting hooks for lifting the bike with the optional racing stand Functional design in MotoGP style High-quality matt black finish Chain guide attachment in left strut With Yamaha logo Simple mounting From the original Yamaha accessories catalog

Rubberized protection pad for the fuel tank Original Yamaha design Rubberized texture for maximum protection Sporty 3D design with R7 logo Compatible with optional grip pads for fuel tank sides VHB adhesive from 3M

Protective pad for the fuel tank in textured carbon look Original Yamaha design; specially designed for this model Prevents scratches from the zipper of your jacket Robust and stylish carbon fabric With R7 logo

Robust rubber pads to protect the sides of the fuel tank from scratches caused by the driver's clothing. In addition, they provide more grip and control. Rubberized texture for maximum grip and control Protects the sides of the fuel tank from rider clothing With R7 logo Integrated design Adhesive must cure for 24 hrs before first ride. 3M high performance adhesive

Highly functional and stylish covers for license plate, rear view mirror and passenger footpeg mounts when you remove them for track riding. 5-piece racing cover set High quality and durable matte black material Easy to install - no special tools required Lightweight From Gilles Tooling Including blind plugs for cable openings

Beautifully shaped and functional protectors on both sides of the R7 to protect the engine or fairing panels. Sleek integrated design Lightweight and stylish with black aluminum insert Does not affect the lean angle of the bike High quality and durable surface coating

Stainless steel grille in racing design for the tank fairing Stainless steel Racing design Fits the optional radiator guard

Aluminum radiator shroud to protect the original radiator Provides improved protection of the radiator from stone chips Stainless steel grille in racing design Robust, black anodized aluminum frame Fits optional grille tank fairing

Experience a lightweight and high-strength upgrade for your motorcycle with the machined aluminum passenger footpegs for your Yamaha. Enjoy the improved stability and modern design of this accessory. Perfect for anyone who appreciates quality and performance. Get it now and make your ride even more enjoyable! Milled from solid aluminum Lighter than standard footrests Tighter than standard footrests Easy to fit Original Yamaha accessories

You can now optimally protect your Yamaha with the rear axle protector stand mounts from Yamaha. The impact surface is made entirely of CNC-machined POM, which guarantees high quality and durability. The colored ring surrounds are available separately and give your motorcycle a sporty look. These rear axle covers are from the original Yamaha accessories range and are easy to fit. Ensure that your rear axle is optimally protected and rely on the high-quality accessories from Yamaha. Impact surface made entirely from CNC-machined POM Colored ring surrounds (sold separately). Rear axle covers with a sporty look From the original Yamaha accessories range Easy mounting

Stylish license plate holder as a replacement for the original holder Sporty and lightweight design Attractive design With LED license plate light Includes reflector holder and license plate holder Includes brackets and covers for original turn signals Easy to install

The HIGHSIDER license plate holder AKRON-RS adapts perfectly to the lines of your bike through its design.The model-specific bracket of the AKRON-RS allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting.To avoid damage to cables, all sharp-edged feedthroughs are protected by a rubber membrane grommet.The license plate is made of sheet steel and 2 mm thick. Precise cutting is done by laser. After edging, the plate is given a weather-resistant black powder coating.This ensures an optimal fit and durability.The stepless adjustment allows you to bring the plate without drilling in the desired position. To keep the plate in this position, there is an additional locking screw.The turn signal holders of the AKRON-RS are adjustable in width and thus suitable for any type of accessory turn signals. This adjustability allows you to adjust the position for your turn signals to the most different license plates. To allow the installation of the turn signals without separation from the wiring harness, the 10 mm holes are slotted to the side.You can also adjust the position of the reflector individually via a slider. An adaptation to the different designs of EU license plates is therefore no problem.To screw the license plate securely and reduce vibrations, two rubber washers are included. Another rubber buffer supports the license plate on its underside.Details:- model-specific mount- infinitely adjustable turn signal holder- slotted turn signal mount for easy installation without cable separation- infinitely adjustable reflector, E-approved- suitable for European license plates- infinitely adjustable angle of inclination- additional screw for optimal position security- easy fixation without further work steps (e.g. drilling)- easy mounting of the license plate through slotted holesThe scope of delivery of the AKRON-RS includes- Model-related holder with mounting parts- AKRON-RS license plate holder- Adjustable turn signal brackets- E-tested reflector with adjustable holder- Mounting instructionsNotes:- A special turn signal holder is optionally available for the original turn signals in the accessories tab.- If there are side reflectors mounted on your original license plate holder, they must be reattached in a suitable position or replaced with new ones.Tips:If you have not found a model-specific license plate holder for your vehicle, the universal license plate holders from HIGHSIDER, which are available in many different designs, are certainly a good alternative.

Making good bikes perfect. Following this motto, LSL has developed the license plate holder MANTIS-RS.It fits perfectly to your motorcycle and emphasizes the lines of your bike with its sporty design.And as usual, LSL has thought of everything.The model-specific bracket of the MANTIS-RS allows replacement without further drilling or cutting on the vehicle.The design fits perfectly to the rear of your bike and uses the original mounting points of the vehicle.Sharp-edged feedthroughs are protected with rubber membrane grommets against damage to the cables.The license plate is made of 2 mm thick steel plate, laser-cut, edged and weather-resistant black powder-coated.The license plate is fixed in the correct position by an additional locking screw.The width-adjustable turn signal holders of the MANTIS-RS are suitable for any type of accessory turn signals. Through this adjustment option, you will find the right position for your turn signals. The adaptation to the most different EU license plates is therefore no problem. The mounting holes of the turn signals have a diameter of 10 mm and are slotted to the side. This makes it possible to mount the turn signals without disconnecting them from the wiring harness.The slider for mounting the rear reflector is also individually adjustable. An adjustment to the different designs of EU license plates is therefore no problem.The two rubber washers supplied are used for vibration-reducing bolting of the license plate. An additional rubber buffer supports the license plate on the underside.Details:- model-specific bracket- steplessly adjustable turn signal holder- slotted turn signal holder for easy mounting without cable separation- infinitely adjustable reflector, E-approved- suitable for european license plates- infinitely adjustable angle of inclination- additional screw for optimal position security- easy fixation without further work steps (e.g. drilling)- easy mounting of the license plate through slotted holesThe scope of delivery of the MANTIS-RS includes:- Model-related holder with mounting parts- MANTIS-RS license plate holder- Adjustable turn signal holders- E-tested reflector with adjustable holder- Mounting instructionsNotes:- A special turn signal holder is optionally available for the original turn signals in the accessories tab.- If side reflectors are mounted on your original license plate holder, they must be reattached in a suitable position or replaced with new ones.Tip:If you haven't found a model-specific license plate holder for your vehicle, you're sure to find what you're looking for in LSL's universal license plate holders, which are available in many different designs.

Dark tinted version of the standard windshield, which emphasizes the sporty touch. Easy to replace thanks to precise shape and dimensions like the standard windshield Impact-resistant, high-quality material

Discover the new Moto-GP-style exhaust cover for the Yamaha MT-07 and R7! With its unique design, inspired by Moto-GP exhaust solutions, this original Yamaha accessory sets new standards. The fairing fits perfectly into the mounting points of the standard part and is 100% roadworthy. The exclusive fairing mesh visually enhances your motorcycle and gives it a sporty look. Installation is child's play - so you can upgrade your bike in no time at all. Get the Moto GP-style exhaust cover now and turn your Yamaha into an eye-catcher! Exhaust cover as a replacement for the standard cover with Moto GP-style braiding Fits perfectly into the mounting points of the standard part Design inspired by Moto GP exhaust solutions Includes exclusive fairing mesh to enhance the look 100% street legal YAMAHA original accessories Simple installation  

  The finish is convincing, all IXIL mufflers have in common a high quality finish with stainless steel materials. Combined with the available outer shells in stainless steel painted black, you get a visually and technically high-quality silencer. All IXIL mufflers are supplied as a complete system, bolt-on or slip-on exchange muffler. Of course, all parts required for mounting are included in the delivery. Super optics and deep rich sound fulfill all customer wishes. Suitable for following Yamaha models: ModelChassis numberYear of manufacture fromYear of manufacture till YZF R7 700 (A2) - 35 KW RM401 2021 2021 YZF R7 700 (A2) - 35 KW RM401 2022 2022 YZF R7 700 - 54 KW RM391 2021 2021 YZF R7 700 - 54 KW RM391 2022 2022 YZF R7 700 World GP 60th Anniversary - 54 KW RM391 2021 2021 YZF R7 700 World GP 60th Anniversary - 54 KW RM391 2022 2022   Tailpipe diameter: 60 mmTailpipe length: 350 mmWeight: 2,4 kgShape: roundSurface: stainless steel black with aluminum end capDesign: mounting by clamp

Custom handlebar ends give your Yamaha a special touch. Latest design with closed end cap With invisible screw in the middle Fully functional - same weight as original part for vibration damping From Gilles.Tooling Compatible with optionally available, stylish ring mounts

The Original Yamaha billet rider footrests are a lightweight and high-strength alternative to the standard rider footrests. With their larger footrest surface and ergonomic shape, they offer a high level of comfort when riding. The subtle color details also give the footpegs an appealing look.The installation of the billet rider footpegs is simple and straightforward. They can be easily fitted as a 2-piece set. Thanks to their design, they blend in perfectly with other billet aluminum components in the accessories collection.The billet rider footrests are from Gilles.Tooling, a renowned manufacturer of motorcycle accessories. Their name stands for quality and reliability.If you are looking for high-quality rider footrests that are not only functional but also visually impressive, then the original Yamaha billet rider footrests are the perfect choice for you. Be inspired by their lightness, strength and comfort and give your motorcycle an individual touch. Lightweight and high-strength alternative to the standard rider footpegs. Larger footrest surface and ergonomic shape for more comfort With subtle color details Easy to fit From Gilles.Tooling Available as a 2-piece set Blends in perfectly with other billet aluminum components in the accessory collection