Orignal tank cover Aprilia RSV4 RF / RR/ Tuono V4 black
Due to the tight-fitting tank cover with tank cap cutout, the tank bag has a stable fit even at higher speeds. The cover protects the tank from scratches and stone chips.
Original Aprilia RSV 4/ Tuono V4 tank bag / tank bag
Original Aprilia RSV 4/ Tuono V4 tank bag / tank bagtank bag large Capacity of approx. 9 liters. The bag is attached to the tank cover with a quick release system. For refueling it is simply removed or just lifted Includes map pocket, shoulder strap, carrying strap and rain cover.
SW-Motech PRO Cargobag rear bag Aprilia RSV 1000 R (03-09), RR
With a volume of 50 liters, the Cargobag is one of the most versatile bags from the PRO rear bag series. The soft bag adapts very well to the most varied of rear shapes and offers numerous storage space solutions for transport on the motorcycle. Large outer pockets on both sides, which can be compressed with Velcro straps if necessary, make the cargo bag even more adaptable. A large mesh pocket in the lid offers space for small objects and bracing surfaces with straps on the outside to hold additional items of luggage. < span class = "seg addText"> The tail bag from the PRO series is made of indestructible 1680 D ballistic nylon, which was originally designed for military use. In addition, it impresses with its high-quality workmanship and well thought-out features: reflective attachments ensure better visibility and a MOLLE attachment on the top enables additional pockets to be attached.Universal fit for almost all motorcycles Reliable 4-point lashing strap attachment
SW-Motech PRO Rearbag tail bag Aprilia RSV 1000 R (03-09), RR
With its universal fit, the PRO rearbag is just as suitable for use on road bikes as it is for the pillion seat of a travel enduro. With a volume of 22 liters, which can be expanded to 34 liters, the bag offers enough space for luggage on the pillion seat of your motorcycle. You can even stow your helmet in the rear bag. The slightly curved underbody adapts to the seat and is equipped with non-slip material. The top of the PRO Rearbag tail bag made of dimensionally stable and laminated EVA material provides additional pockets with a secure hold on the sewn-on MOLLE attachment. The tail bag from the PRO series is made of indestructible 1680 D ballistic nylon, which was originally designed for military purposes. In addition, it impresses with high-quality workmanship and well thought-out features: reflective attachments ensure better visibility, robust lashing hooks secure the bags quickly and easily at the rear and a MOLLE attachment on the top enables additional bags t
SW-Motech PRO Roadpack rear bag Aprilia RSV 1000 R (03-09), RR
The PRO Roadpack is a compact bag that fits perfectly on the rear of small and sporty motorcycles. The volume of the small tail bag can be expanded from 8 to 14 liters via a zipper. An inside pocket with zipper in the lid offers storage space for keys, wallet and other small things. In addition to the loop straps supplied, two Velcro straps and a slot on the underside enable quick and secure attachment to the bench or luggage rack . The stiffened sides, the molded cover made of EVA material and straps for tightening the volume increase guarantee a firm shape even with a sporty driving style. The tail bag from the PRO series is made of indestructible 1680 D ballistic nylon, which was originally designed for military purposes. In addition, it impresses with high-quality workmanship and well thought-out features: reflective attachments ensure better visibility, robust lashing hooks secure the bags quickly and easily at the rear and a MOLLE attachment on the top enables additional
Decor, Aprilia Racing for Aprilia Shiver 900, RSV4, Tuono V4, Dorsoduro 900 - black
Multimedia Platform 2.0
Allows you to connect your smartphone (Apple and Android) to the vehicle. Creates a multimedia platform with all useful vehicle data, such as navigation (not available for the Shiver 900 and Dorsoduro 900), trip planning, user manual, Eco-Meter, and grip information from your traction control system. If necessary, a vehicle-specific kit (sold separately) must be installed. For more information on the Piaggio Multimedia Platform, visit: www.multimediaplatform.piaggio.com Note: Due to differences in smartphone models and software, as well as variations in vehicle software, we unfortunately cannot provide technical support via email or phone for pairing or installing the MIA Multimedia Platform . If you encounter any issues, we recommend visiting a specialized repair shop. Important Note:The MIA systems are shipped from the manufacturer with different software versions. An update to the latest firmware version is typically performed as part of the activation process by an authorized Piaggio dealer. Please note that some dealers may charge a service fee for this service or for any necessary software updates. These costs are not included in the purchase price and will not be covered by us.
Aprilia RSV 4 cover for mirror mount
Covers mirror mounts "Aprilia Road Laser engraved logos Allow the removal of the mirrors when used on the race track including mounting hardware (bolts, washers & nuts) Color: black Important note: For track use only.
Side fairing, carbon, left for Aprilia RSV4 RR/RF/ Tuono V4
- made of painted (matted) carbon fiber. - used to replace the plastic side panels and give the bike a sportier look reminiscent of the Factory version. - Weight saving- homologated for road use.
Original Aprilia RSV 4 / Tuono V4 / Caponord/ Shiver front fender, carbon
Component made of polished carbon fiber (with matte finish). Fits on the standard push button mounts. Gives the bike a sporty look reminiscent of the Factory version.
Short license plate holder incl. license plate light for Aprilia RS4 125 / Tuono V4 / RSV 4 Factory
Making good bikes perfect. Following this motto, LSL has developed the license plate holder MANTIS-RS.It fits perfectly to your motorcycle and emphasizes the lines of your bike with its sporty design.And as usual, LSL has thought of everything.The model-specific bracket of the MANTIS-RS allows replacement without further drilling or cutting on the vehicle.The design fits perfectly to the rear of your bike and uses the original mounting points of the vehicle.Sharp-edged feedthroughs are protected with rubber membrane grommets to prevent damage to the cables.The license plate is made of 2 mm thick steel plate, laser-cut, edged and weather-resistant black powder-coated.The license plate is fixed in the correct position by an additional locking screw.The width-adjustable turn signal holders of the MANTIS-RS are suitable for any type of accessory turn signals. Through this adjustment option, you will find the right position for your turn signals. The adaptation to the most different EU license plates is therefore no problem. The mounting holes of the turn signals have a diameter of 10 mm and are slotted to the side. This makes it possible to mount the turn signals without disconnecting them from the wiring harness.The slider for mounting the rear reflector is also individually adjustable. An adjustment to the different designs of EU license plates is therefore no problem.The two rubber washers supplied are used for vibration-reducing bolting of the license plate. An additional rubber buffer supports the license plate on the underside.Details:- model-specific bracket- steplessly adjustable turn signal holder- slotted turn signal holder for easy mounting without cable separation- infinitely adjustable reflector, E-approved- suitable for European license plates- infinitely adjustable angle of inclination- additional screw for optimal position security- easy fixation without further work steps (e.g. drilling)- easy mounting of the license plate through slotted holesThe scope of delivery of the MANTIS-RS includes:- Model-related holder with mounting parts- MANTIS-RS license plate holder- Adjustable turn signal holders- E-tested reflector with adjustable holder- Mounting instructionsNotes:- A special turn signal holder is optionally available for the original turn signals in the accessories tab.- If side reflectors are mounted on your original license plate holder, they must be reattached in a suitable position or replaced with new ones.Tip:If you haven't found a model-specific license plate holder for your vehicle, you're sure to find what you're looking for with LSL's universal license plate holders, which are available in many different designs.Suitable for Aprilia RSV4 09-20, Tuono V4 11-20, RS4 125 11-, RS 125 17-, Tuono 125 17-, incl. license plate light (E-tested)
MRA Racing windshield "R" black APRILIA RSV 4 -125 RK
RSV 4 - Racing disc "R Year of manufacture: 2009 to 2014 This disc shape was developed for racing and is used by many racing teams. The racing disc corresponds in the lower part of the original disc, but has a dome-like increase in the middle. This relieves the helmet from wind pressure and improves aerodynamics. Fig shows windshield in black!
MRA Racing windshield "R" colorless APRILIA RSV 4 -125 RK
RSV 4 - Racing disc "R Year of manufacture: 2009 to 2014 This disc shape was developed for racing and is used by many racing teams. The racing disc corresponds in the lower part of the original disc, but has a dome-like increase in the middle. This relieves the helmet from wind pressure and improves aerodynamics. Fig shows windshield in black!
MRA original molding disc "O" black APRILIA RSV 4 -125 RK
Same dimensions and size as the original windshield Easy replacement with the original windshield, no modification of the fairing necessary Original screws can be used Edge protector included With ABE - no registration necessary Picture shows screen in dark tinted Suitable for: ManufacturerModelfrom year of constructionuntil year of manufacture Aprilia RS4 125 2011 2015 Aprilia RS4 50 2011 2015 Aprilia RSV4 2009 2014
MRA original molding disc "O" colorless APRILIA RSV 4 -125 RK
Same dimensions and size as the original windshield Easy replacement with the original windshield, no modification of the fairing necessary Original screws can be used Edge protector included With ABE - no registration necessary Attention: Picture shows windshield in smoke gray Suitable for: ManufacturerModelfrom year of constructionuntil year of construction Aprilia RS4 125 2011 2015 Aprilia RS4 50 2011 2015 Aprilia RSV4 2009 2014
alpha Technik Bremsscheibe ABD33 schwimmend
alpha Technik Bremsscheibe ABD33 schwimmend alpha Technik Bremsscheibe ABD33 schwimmend (Da=320mm, Di=64,2mm, Lochkreis=80mm, mit Versatz), Innenkranz Alu schwarz eloxiert, Außenring Stahl mit Omega-Design, mit ABE Produktkennzeichnung: Bremsentechnik Produkt Typ: alpha Technik Bremsscheibe ABD33 schwimmend
Holder for service stand for Aprilia RSV4
Made of CNC machined aluminum Nylon closure Color: black/aluminum Attention: Article is no longer manufactured with laser engraved logo
Exhaust bracket, Racing, for slip on for Aprilia Tuono V4/ RSV 4
Important note: For track use only.
Blinker front left / rear right for: YAMAHA YZF125R '08-10
Dimensions and properties identical to standard component.
Blinker front right / rear left for: YAMAHA YZF125R '08-10
Dimensions and properties identical to standard component.
BMC Sport air filter Racing for Aprilia RSV 4 (15-) red
The BMC standard air filters are made of the best materials and guarantee a much higher air flow than conventional paper filters. The extensive know-how from racing is used in the manufacture of the performance-optimized filters and each one meets the highest requirements. For example, the frame of the filters cannot break, the filtering, reusable cotton fabric is impregnated with a special oil, and the aluminum mesh is resistant to gasoline vapors and oxidation thanks to treatment with an epoxy solution Why choose BMC? Better than OEM filters Better than synthetic filters Better than other cotton filters Highest quality Rigorous testing procedures Ecological and economical Winner in all categories BMC operates in numerous sectors: Automotive, Racing, Aviation, Marine and Industrial, always following the specific regulations and requirements of each of the mentioned industries. Accordingly, BMC tests extremely rigorously and accurately to ensure that its air filters are of the highest possible quality. The technical solutions applied by BMC are derived from the results of continuous and intensive laboratory tests. BMC performs filtration tests according to the international standards for air filters (ISO 5011). According to these tests, BMC air filters have a 98.5 percent filtration efficiency.BMC's filter frame design is manufactured using a unique process called "full molding." This allows the striking red filter to be produced in a single molding process without having to glue the corners, which would cause breakage. On the BMC air filter protrudes the least rubber material of all filters available on the market (less than 6 mm), allowing maximum filter surface.Check out our YouVideo for more information:
Black Brake Lever, Racing, for Aprilia RS/Tunono 660 (20-) RSV4
Adjustable front brake lever—made of billet aluminum. Developed by Aprilia test riders seeking maximum comfort on the racetrack. Thanks to its design and numerous adjustment options, the rider can find their optimal operating position. It is equipped with a hinge that allows the lever to bend in the event of a crash, preventing it from breaking. For race use only (without ABE).
Brake lever guard Racing, black for Aprilia RSV4 1100
Brake lever guard Racing, black for Aprilia RSV4 1100
Brake disc lock for Aprilia RSV4, Tuono, Caponord
The ROADLOK BRAKE brake disc lock is CNC machined from anodized billet aluminum. Includes Ergal spacer, stainless steel screws with a strength class of 8.8, a stainless steel locking pin and key code keys. This is a, permanently mounted on the vehicle, brake disc lock that completely blocks the rotation of the front wheel. Quick and easy assembly.
