Inner bags black for aluminum side cases for Aprilia Tuareg 660 /Rally
Black inner bags with practical carrying handles, which make transportation and loading into the side cases easier.
Heated grips for Aprilia Tuareg 660 - Original
Experience carefree riding, even on cold days, with the original heated grips for your Aprilia Tuareg 660. These heated grips not only provide you with pleasant warmth, but also a significantly improved riding experience so that you can concentrate fully on the adventure. Imagine crossing the wintry landscapes while your hands are wrapped in soothing warmth - pure freedom and comfort! The heated grips are characterized by their three adjustable heating intensities (lo-med-hi), which offer you the perfect temperature for any weather. With the practical handlebar control, you have everything under control and can adjust the heat to suit your needs. Thanks to the simple installation, they are ready for use in no time at all and fit your bike perfectly - a genuine original Aprilia accessory that you can rely on. Use the heated grips for your daily commute to work, for example, or for longer tours in the colder months. They not only make riding more comfortable, but also increase your safety, as warm hands can react better. Rely on high-quality original Aprilia quality and experience the difference for yourself. Set of heated grips with adjustable heating intensity (lo-med-hi) with handlebar control for more riding comfort on cold days. Set of heated grips with handlebar control with 3-stage adjustable heating intensity (lo-med-hi) for more riding comfort on cold days simple installation Original Aprilia accessories
Multimedia Platform installation kit for Aprilia /Moto Guzzi
Installation kit for Aprilia / Moto Guzzi MIA device that enables the smartphone (iOS or Android) to be connected to the motorcycle's on-board electronics via Bluetooth. Is required to use the multimedia platform (Art. 607100M).
Inner bag aluminum Top Case for Aprilia Tuareg 660 Original
Inner bag for the aluminum top case for the new Aprilia Tuareg 660.
SW-Motech ION L motorcycle tail bag for Aprilia Tuareg 660 (21-24)
With a volume of 50 l, the ION L rear bag offers sufficient storage space for longer tours. Compression straps prevent the bag from flapping when lightly loaded and allow additional items of luggage to be attached to the bag if required. Two outer side pockets provide quick access to the most important items. Robust clamp fasteners and loop straps allow quick lashing and give the bag a secure hold on the pillion seat or rear of the vehicle thanks to its flexible shape and non-slip base. The carrying handle is another plus point of the spacious ION L rear bag. Tail bags from the ION series - available in S, M and L versionsThree sizes, elegant look, attractive price: the rear bags in the ION series are available in three shapes and can be lashed to almost any motorcycle rear. Made from black 600D polyester with soft vinyl elements, the rear bags combine an attractive design with features suitable for touring, such as optimized storage space, anti-slip underside, lockable main compartment zipper and a waterproof inner pocket. The reflective textile piping is barely noticeable in daylight, but increases visibility many times over in the dark. Optimized for the pillion seat or rear of many models 50 l storage space with low weight Robust clamp fasteners for reliable 4-point fastening with loop straps Compression straps with clip adapters prevent flapping and allow additional luggage to be lashed down Easily accessible: 2 outer side pockets and mesh pocket inside the lid Large main compartment for individual loading Practical carrying handle Non-slip underside for optimum grip Attractive look thanks to the combination of polyester textile fabric with black soft vinyl Reflective details for greater safety in road traffic Discreet design elements: embroidered SW-MOTECH logo and bull in silver-grey Durable, particularly UV-resistant 600D polyester with water-repellent inner coating Waterproof inner bag included in the scope of delivery Scope of delivery 1 x ION L rear bag 1 x waterproof inner bag 4 x loop straps 2 x compression straps 2 x straps for attachment to the license plate holder 1 x paint protection film Details Material: 600D polyester / soft vinyl Color: black / black Dimensions: 50.0 x 70.0 x 30.0 cm Total weight: approx. 1.3 kg Total volume: 50.0 l
SW-Motech ION M motorcycle tail bag for Aprilia Tuareg 660 (21-24)
The ION M rear bag can be attached to almost any motorcycle rear thanks to its optimized fit and the curved, non-slip base. Particularly practical: the rear bag has two outer pockets and a mesh compartment inside the lid. The storage space of 26 liters, which is easily accessible via the large lid, can be increased to 36 liters if required by means of two side extensions. The stiffened sides prevent the bag from flapping - even during sporty riding. An integrated carrying handle and the shoulder strap supplied also make the ION M rear bag a comfortable travel bag. Tail bags from the ION series - available in S, M and L versionsThree sizes, elegant look, attractive price: the rear bags in the ION series are available in three shapes and can be lashed to almost any motorcycle rear. Made from black 600D polyester with soft vinyl elements, the rear bags combine an attractive design with features suitable for touring, such as optimized storage space, anti-slip underside, lockable main compartment zipper and a waterproof inner pocket. The reflective textile piping is barely noticeable in daylight, but increases visibility many times over in the dark. Optimized for the pillion seat or rear of many models Volume expansion from 26 to 36 l via two side zippers, width varies from 44 to 54 cm 4 D-rings for attaching the shoulder strap or other items of luggage No flapping thanks to stiffened sides Easily accessible: 2 outer pockets and mesh pocket inside the lid Large main compartment for individual loading Practical carry handle Non-slip underside for optimum grip Attractive look thanks to the combination of polyester textile fabric with black soft vinyl Reflective details for greater safety in road traffic Discreet design elements: embroidered SW-MOTECH logo and bull in silver-grey Durable, particularly UV-resistant 600D polyester with water-repellent inner coating Waterproof inner bag included in the scope of delivery Scope of delivery 1 x ION M rear bag 1 x waterproof inner bag 4 x long loop straps (67 cm) 4 x short straps (17 cm) 2 x straps for attachment to the license plate holder 1 x shoulder strap 1 x paint protection film Details Material: 600D polyester / soft vinyl Color: black / black Dimensions: 30.0 x 44.0 x 30.0 cm Total weight: approx. 1.5 kg Total volume: 26.0-36.0 l
SW-Motech ION S motorcycle tail bag for Aprilia Tuareg 660 /Rally
Ideal for small and sporty bikes: The volume of the ION S rear bag can be expanded from 7 to 15 l via a zipper and thus offers sufficient storage space for a drink, change of clothes, safety vest and other small items that you need on a day trip or short trip. The compact bag can be lashed to riveted D-rings with the included loop straps. In addition, two Velcro straps and an insert on the underside allow quick and secure attachment to the seat or luggage rack. The stiffened sides, the padded lid and straps to tighten the volume extension guarantee a firm shape even when riding in a sporty manner. Items that can be stowed in the outer pocket or in the mesh compartment inside the lid are particularly quick to hand. A carrying handle also makes the ION rear bag a practical travel companion off the road. Tail bags from the ION series - available in S, M and L versionsThree sizes, elegant look, attractive price: the rear bags in the ION series are available in three shapes and can be lashed to almost any motorcycle rear. Made from black 600D polyester with soft vinyl elements, the rear bags combine an attractive design with features suitable for touring, such as optimized storage space, anti-slip underside, lockable main compartment zipper and a waterproof inner pocket. The reflective textile piping is barely noticeable in daylight, but increases visibility many times over in the dark. Compact rear bag, ideal for small and sporty bikes Volume expansion from 7 to 15 l, height varies between 10 and 18 cm D-rings for reliable 4-point attachment with loop straps Two integrated Velcro straps plus insert for fastening under the seat or luggage rack Easily accessible: outer pocket and mesh compartment inside the lid Large main compartment for individual loading Practical carrying handle Non-slip underside for optimum grip Attractive look thanks to the combination of polyester textile fabric with black soft vinyl Reflective details for greater safety in road traffic Discreet design elements: embroidered SW-MOTECH logo and bull in silver-grey Durable, particularly UV-resistant 600D polyester with water-repellent inner coating Waterproof inner bag included in the scope of delivery Scope of delivery: 1 x ION S rear bag 1 x waterproof inner bag 1 x strap set for rear bag (20 mm wide, 2x 37 cm long, 2x 70 cm long) 1 x paint protection film Details: Material: 600D polyester / soft vinyl Color: black / black Dimensions: 33.0 x 29.0 x 10.0 cm Total weight: approx. 0.6 kg Total volume: 7.0-15.0 l
SW-Motech PRO Cross WP strap tank bag for Aprilia Tuareg 660 /Rally
The PRO Cross WP is a waterproof strap tank bag for all motorcyclists who leave nothing to chance. Thanks to robust straps, the tank bag is under constant tension and has a tight fit, even on small enduro bikes with a narrow tank, the PRO Cross WP can be positioned perfectly. It can be quickly removed using four quick-release fasteners, and the two front buckles only need to be undone to refuel.Like all waterproof tank bags, the body of the PRO Cross WP is made of TPU material. No seams, no holes, no exposed zippers: Simply a completely waterproof refuge for all your belongings, which are much better kept dry. The sturdy EVA lid with a magnetic closure ensures convenient access.The PRO tank bag offers an elegant and timeless design combined with durable materials and sophisticated product features. The top made of laminated EVA material gives the bag a distinctive shape and, in combination with a MOLLE attachment made of durable Hypalon, ensures a secure hold for additional products such as smartphone and tablet holders. Suitable for many motorcycle tanks Waterproof tank bag with 5.5 liters of storage space Top of the tank bag made from laminated and dimensionally stable EVA material Overlapping lid prevents the ingress of water Magnetic securing of the lid Welded body made from TPU material without seams MOLLE attachment made of sturdy Hypalon material on the top for attaching accessories such as smartphone and tablet holders Sealed zippers Robust metal zipper pullers Reflective details for better visibility Robust carrying handle Underside made from non-slip material Scope of delivery 1 x PRO Cross WP strap tank bag 1 x strap set 2 x paint protection film Fitting instructions Details Material: EVA / TPU Surface: PU-coated Color: black Dimensions: 24.0 x 27.0 x 19.9 cm Total weight: approx. 0.9 kg Total volume: 5.5 l Mounting instructions:
SW-Motech PRO Cargobag rear bag for Aprilia Tuareg 660 (21-24)
With a volume of 50 liters, the Cargobag is one of the most versatile bags in the PRO rear bag series. The soft bag adapts very well to a wide variety of rear shapes and offers numerous storage space solutions for transportation on the motorcycle.Large outer pockets on both sides, which can be compressed with Velcro straps if required, make the Cargobag even more adaptable. A large mesh pocket in the lid offers space for small items and tensioning areas with straps on the outside provide support for other items of luggage.The PRO series rear bag is made from indestructible 1680 D ballistic nylon, which was originally designed for military purposes. It also impresses with its high-quality workmanship and well thought-out features: reflective attachments ensure better visibility and a MOLLE attachment on the top allows additional bags to be attached. Universal fit for almost all motorcycles Reliable 4-point tensioning strap fastening 2 outer pockets with zippers 2 side tensioning surfaces for additional luggage Storage space for a helmet Zippered mesh pocket in the lid Covered zippers Underside made of non-slip material Made of robust and particularly UV-resistant 1680D ballistic nylon with water-repellent inner coating Reflective details for better visibility Zipper management: rubber loops prevent the zipper from flapping MOLLE attachment made of sturdy Hypalon material on the top for attaching additional pouches Weather protection thanks to included waterproof inner pocket Robust carrying handle Scope of delivery 1 x PRO Cargobag rear bag 1 x waterproof inner bag 4 x loop straps 2 x lashing eyes for attachment to the license plate holder 1 x paint protection film Fitting instructions Details Material: 1680D ballistic nylon Color: black / anthracite Dimensions: 50.0 x 70.0 x 33.0 cm Total weight: 1.7 kg Total volume: 50.0 l
SW-Motech PRO Rackpack rear bag for Aprilia Tuareg 660 /Rally
The robust PRO Rackpack was developed specifically for use on luggage carriers and, in combination with the shoulder strap, is a practical travel bag. In conjunction with the luggage rack extension, it can be easily attached to the STREET-RACK or the ADVENTURE-RACK as well as to standard racks, pillion seats or a sissy bar.The extensions on both sides of the rear bag allow the volume to be increased from 32 to 42 liters. Smaller luggage can be safely stowed in the two outer pockets with internal mesh compartments. The underside is equipped with anti-slip material and the top of the PRO Rearbag rear bag provides a secure hold for additional bags on the sewn-on MOLLE attachment. The rear bag from the PRO series is made from indestructible 1680 D ballistic nylon, which was originally designed for military purposes. It also impresses with its high-quality workmanship and well thought-out features: reflective attachments ensure better visibility, robust lashing hooks secure the bags quickly and easily to the rear and a MOLLE attachment on the top allows additional bags to be attached.The patented lashing hooks allow flexible attachment of the PRO rear bags. The straps are hooked in and tightened in a single step. To remove the bag, the strap is released in one easy step and removed from the lashing eyelet by pulling on the drawstring. The excess strap length can be secured to the strap with a Velcro fastener. This allows the bag to be used on different motorcycles and the strap length to be adjusted accordingly. Universal fit for almost all motorcycles Large mesh compartment with zipper on the inside of the lid Additional storage space thanks to two outer pockets with covered zippers Inner mesh compartments with zippers in both outer pockets Volume extensions on both outer sides Underside made of non-slip material Robust lashing eyes for securely fastening the bag at 4 points and for lashing down additional bags Made of durable and particularly UV-resistant 1680D ballistic nylon with water-repellent inner coating Reflective details for better visibility Zipper management: elastic loops prevent the zipper from flapping MOLLE attachment made of sturdy Hypalon material on the top for attaching additional bags. Quick and easy attachment of the bag to the motorcycle using loop straps with patented lashing hooks. Weather protection thanks to the supplied waterproof inner bag Sturdy carrying handle Scope of delivery: 1 x PRO Rackpack rear bag 1 x waterproof inner bag 4 x loop straps with lashing hooks 1 x shoulder strap 1 x paint protection film Fitting instructions Details: Material: 1680D ballistic nylon Color: black / anthracite Dimensions: 33.0 x 56.0 x 26.0 cm Total weight: 2.4 kg Total volume: 32.0-42.0 l
SW-Motech PRO Rearbag rear bag for Aprilia Tuareg 660 /Rally
With its universal fit, the PRO Rearbag is just as suitable for use on road bikes as it is for the pillion seat of a touring Enduro. With a volume of 22 liters, which can be expanded to up to 34 liters, the bag offers sufficient space for luggage on the pillion seat of your motorcycle.You can even stow your helmet in the rear bag. The slightly curved bottom adapts to the seat and is equipped with anti-slip material. The top of the PRO Rearbag rear bag is made of dimensionally stable and laminated EVA material and holds additional bags securely on the sewn-on MOLLE attachment. The rear bag from the PRO series is made from indestructible 1680 D ballistic nylon, which was originally designed for military purposes. It also impresses with its high-quality workmanship and well thought-out features: reflective attachments ensure better visibility, robust lashing hooks secure the bags quickly and easily to the rear and a MOLLE attachment on the top allows additional bags to be attached.The patented lashing hooks allow flexible attachment of the PRO rear bags. The straps are hooked in and tightened in a single step. To remove the bag, the strap is released in one easy step and removed from the lashing eyelet by pulling on the drawstring. The excess strap length can be secured to the strap with a Velcro fastener. This allows the bag to be used on different motorcycles and the strap length to be adjusted accordingly. Universal fit for almost all motorcycles Top of the bag made of laminated and dimensionally stable EVA material Zippered mesh compartment in the lid Additional storage space thanks to two outer pockets with covered zippers Volume expansion in the lid area from 22 to 34 liters Storage space for a helmet Underside made from non-slip material Robust lashing eyes for securely fastening the bag at 4 points and for lashing down additional bags Made of durable and particularly UV-resistant 1680D ballistic nylon with water-repellent inner coating Reflective details for better visibility Zipper management: elastic loops prevent the zipper from flapping MOLLE attachment made of sturdy Hypalon material on the top for attaching additional bags. Quick and easy attachment of the bag to the motorcycle using loop straps with patented lashing hooks. Weather protection thanks to the supplied waterproof inner bag Sturdy carrying handle Scope of delivery: 1 x PRO Rearbag rear bag 1 x waterproof inner bag 4 x loop straps with lashing hooks 2 x lashing eyes for attachment to the license plate holder 1 x paint protection film Fitting instructions Details: Material: 1680D ballistic nylon Color: black / anthracite Dimensions: 40.0 x 43.0 x 25.0 cm Total weight: 1.8 kg Total volume: 22.0-34.0 l
Anti-theft alarm system Euro 4 / 5 / 5+ Original Piaggio
Features: Electronic anti-theft device with its own power supply and improved sensitivity. Multifunctional remote control. Reduced energy consumption. CE homologation. Mounting kit required depending on vehicle, must be ordered separately. The following mounting kits are required in each case and must be ordered separately: 2S001581 Aprilia RS660 / Tuono 660 1D004150 Aprilia SR Compact GT 125 / 200 E5 2S001869 Aprilia Tuareg 660 E5 ABS 2S002266 Aprilia Tuareg Euro 5+ 2S002001 Moto Guzzi Stelvio 2S001571 Moto Guzzi V7 850 Stone / Special / Sport E5 from 2021 2S001437 Moto Guzzi V85TT E4 / E5 from 2019 2S000758 Moto Guzzi V9 1D003037 Piaggio Beverly 1D001284 Piaggio Liberty 1D001456 Piaggio Medley 1D001738 Piaggio MP3 1D003740 Piaggio MP3 1D002874 Piaggio MP3 300 HPE (additionally for MMP) 1D001795 Vespa GTS E4> 1D004367 Vespa GTS/GTV 2023> (keyless) 1D003040 Vespa Primavera / Sprint E4 from 2018
SW-Motech PRO Seat Ring for Aprilia Tuareg 660 /Rally
With the PRO Seat Ring, you can attach a PRO tank ring to your seat and benefit from the advantages of the magnet-assisted fastening system. This is always useful when it is not possible to attach a tank ring to the front of the tank. The PRO tank ring sits on a glass fiber-reinforced plastic plate that is connected to a rubber pad for better grip. Lashing straps secure the plate to the seat. You can attach the four PRO tank bags with a straight base to the PRO Seat Ring: The Micro, Daypack, Sport and Yukon WP models find a secure hold here. Glass fiber reinforced plastic plate For use on the pillion seat For PRO tank bags with a straight base Scope of delivery: 1 x base plate 1 x Tank ring base 1 x PRO tank ring 2 x lashing straps Fitting instructions Assembly material Details: Material: glass fiber reinforced plastic Color: black Total weight: approx. 0.4 kg
Mia Multimedia Platform 3.0 Original Piaggio
MIA allows the rider to connect their iOS or Android smartphone to the motorcycle's onboard electronics via Bluetooth. To use all infotainment features, the Bluetooth headset or helmet must also be connected. The rider can view the information on the vehicle’s display (the smartphone can stay in the pocket) and manage it safely using the “mode” button. Moto Guzzi MIA App Information & Features:Link: https://app.motoguzzi.com/user-manual/ (click here)(**Free app user license for the first 3 years, followed by an annual fee of 7 euros; must be requested via the app.**) Note: Due to differences in smartphone models, software versions, and vehicle software, we unfortunately cannot offer technical support via email or phone for pairing or installing the MIA multimedia platform . If you encounter any issues, we recommend visiting a specialized repair shop. Important Note:MIA systems are shipped by the manufacturer with different software versions. An update to the latest firmware version is typically performed as part of the unlocking or activation process by an authorized Piaggio dealer. Please note that some dealers may charge a service fee for this service or for any necessary software updates. These costs are not included in the purchase price and will not be covered by us.
ION footrest kit for Aprilia Tuareg 660 (21-)
The inexpensive ION footrest kits allow the footrest to be mounted at the original height or lowered by 15 mm. Designed to be extremely stable and durable, the stainless steel footpegs offer extra grip and are recommended for adventure, off-road and street machines. Joints made of high-strength aluminum alloy ensure that the detent can fold away if the vehicle falls over. A removable rubber pad reduces vibrations, the profile provides good grip even in off-road use. For mounting the model-specific joint adapters on the footrest mount, the original mounting parts (spring, bolt, ...) are used. Easy mounting on the original footrest mount Individually adjustable: original height or lowering of the footrest by 15 mm More riding comfort thanks to large contact area Non-slip due to profiled surface structure Made of high-quality, corrosion-resistant cast stainless steel with removable rubber cover Mounting material included in delivery Scope of delivery 2 x ION footrests 2 x model specific joint adapters Mounting instructions Mounting material Details Material: stainless steel / rubber Color: silver / black Total weight: approx. 1.2 kg
EVO footrest kit for Aprilia Tuareg 660 (21-)
The original footrest does not offer a comfortable position? Then the EVO footrest kit from SW-MOTECH is the ideal solution. A sophisticated system consisting of rotatable elements with firmly interlocking teeth allows 36 variation possibilities. The position of the footrest can be adjusted downwards, forwards and backwards as well as in terms of inclination to suit individual requirements.The model-specific joint adapters are simply mounted on the footrest mount using the original parts. We show how this works in the fitting instructions. Simple mounting on the original footrest mount 36-fold adjustable via rotatable, toothed elements downwards, forwards and backwards as well as in inclination Individual adjustment of the height (highest setting corresponds to the original position, lowering up to max. 15 mm possible) Secure hold due to interlocking of elements and screw connection Markings facilitate symmetrical adjustment of both sides Profile with rounded edges protects the boot sole and gives extra grip at the same time Removable, metal-reinforced rubber pad with non-slip surface structure and large contact surface (approx. 8 x 5 cm) for more comfort and grip Made of electropolished, corrosion-resistant cast stainless steel Mounting material included in delivery Scope of delivery 2 x EVO footrests 2 x model-specific joint adapters Mounting instructions Mounting material Details Material: stainless steel / rubber Color: silver / black Total weight: approx. 1.4 kg
Seat high Comfort for Aprilia Tuareg 660 Original
Improve riding comfort in long and extreme conditions with the Comfort Seat with Comfort Memory Foam Insert. Available in 3 different configurations to adjust the seat height (+/- 2 cm), this accessory provides great comfort for long distance rides.
Seat deep Comfort for Aprilia Tuareg 660 Original
Improve riding comfort in long and extreme conditions with the Comfort Seat with Comfort Memory Foam Insert. Available in 3 different configurations to adjust the seat height (+/- 2 cm), this accessory provides great comfort for long distance rides.
Seat Standard Comfort for Aprilia Tuareg 660 Original
Improve riding comfort in long and extreme conditions with the Comfort Seat with Comfort Memory Foam Insert. Available in 3 different configurations to adjust the seat height (+/- 2 cm), this accessory provides great comfort for long distance rides.
Lamp guard grille for Aprilia Tuareg 660 (22-) Hepco & Becker
A whirled-up stone on off-road passages often means the end for the expensive front headlight. Our Hepco & Becker lamp protection grille protects the headlight in many cases and also gives your bike the off-road look befitting its status. adapted to the design of the motorcycle effective protection no reflections or danger by self glare easy mounting on mostly existing screw points robust and high quality coating made in Germany without TüV
Tank guard for Aprilia Tuareg 660 (22-) Hepco & Becker
The Hepco & Becker tank guards perfectly trace the lines of the machine and give the motorcycle an individual character. In the event of an overturn or unintentional contact with the ground, they can save the motorcycle and the driver from major damage and offer the best possible protection. A sensible purchase to avoid costly repairs in the event of an unexpected accident.The forces of impact are absorbed by the material in the best possible way. After a fall, a crash bar should be replaced. Welds and the material may have suffered invisible damage and thus no longer provide protection in the event of another fall. Individual parts or individual sides can be ordered without problems from us via mail. protects tank, side fairing and stem high quality coating useful for lashing the motorcycle stable round tube from German production Scope of delivery: right + left + mounting material Engine guards do not need to be registered and do not require ABE
Main stand for Aprilia Tuareg 660 Original
To support a correct stand and safe parking of your motorcycle in all conditions and on any surface, this main stand is designed specifically for the Tuareg 660, with strong load capacity and easy movement.
Chain guard for Aprilia Tuareg 660 /Rally
This basic accessory is extremely important for adventure off-road use to ensure that the chain functions perfectly under extreme riding conditions and to prevent additional ageing of the transmission due to overloading or dirty riding.
Windshield large without bracket for Aprilia Tuareg 660 (22-24)
The touring windshield is a must-have accessory for long-distance rides or tours in poor weather conditions: improve aerodynamic protection against air resistance. 4mm metacrilates ensure full clear vision for a long time and strong resistance to weather conditions. EU road approval.
