Shad

The 3P side mounting system was developed specifically for the SH23, SH35, SH36 and SH38 side cases, as well as the Terra TR30 and TR40 side bags. During the development phase, safety was prioritised above all else, alongside aesthetic considerations. Integrated design: The 3P mounting system adapts perfectly to the contours of the vehicle. The typical right-angled frame has been reduced to a single arm, which supports the three points (3P) required for mounting the panniers. Position: Both the volume of the case and the angle of the 3P system have been designed to shift the weight of the luggage as close as possible to the centre of the motorbike. This ensures greater safety and stability when riding with a full load. Aerodynamics: The use of three mounting points provides both stability and flexibility. This is achieved through a slight oscillation of the pannier. This allows air to circulate freely around the pannier, thereby avoiding the so-called ‘angle effect’ typical of flat, rigid panniers. Here too, this results in improved safety and stability whilst riding. Patent pending: The uniqueness and technical innovation of the 3P system have enabled SHAD to patent it. This makes SHAD the sole manufacturer able to offer this mounting system.Main material: steel Note: Not compatible with TR36 and TR47.

The 3P side mounting system was developed specifically for the SH23, SH35 and SH36 side cases. During the development phase, safety was the primary focus, alongside aesthetic considerations. Integrated design: The 3P mounting system adapts perfectly to the contours of the vehicle. The typical right-angled frame has been reduced to a single arm, which supports the three points (3P) required to secure the panniers. Position: Both the volume of the pannier and the angle of the 3P system have been designed to shift the weight of the luggage as close as possible to the centre of the motorbike. This ensures greater safety and stability when riding with a full load. Aerodynamics: The use of three mounting points provides both stability and flexibility. This is achieved through a slight oscillation of the pannier. This allows air to circulate freely around the pannier, thereby avoiding the so-called ‘angle effect’ typical of a flat, rigid pannier. Here too, this results in improved safety and stability whilst riding. Patent pending: The uniqueness and technical innovation of the 3P system have enabled SHAD to patent it. This makes SHAD the sole manufacturer able to offer this mounting system.Main material: steelColour: painted black  Note: Not compatible with TR36 and TR47

The 3P side mounting system was developed specifically for the SH23, SH35, SH36 and SH38 side cases, as well as the Terra TR30 and TR40 side bags. During the development phase, the focus was on safety above all else, alongside aesthetic considerations. Integrated design: The 3P mounting system adapts perfectly to the contours of the vehicle. The typical right-angled frame has been reduced to a single arm, which supports the three points (3P) required for mounting the panniers. Position: Both the volume of the case and the angle of the 3P system have been designed to shift the weight of the luggage as close as possible to the centre of the motorbike. This ensures greater safety and stability when riding with a full load. Aerodynamics: The use of three mounting points provides both stability and flexibility. This is achieved through a slight oscillation of the case. This allows air to circulate easily around the pannier, thereby avoiding the so-called ‘angle effect’ typical of a flat, rigid pannier. Here too, this results in improved safety and stability whilst riding. Patent pending: The uniqueness and technical innovation of the 3P system have enabled SHAD to patent it. This makes SHAD the sole manufacturer able to offer this mounting system.Note: Not compatible with TR40, TR30, SH23, TR27, TR36 and TR47.Suitable for the following models: NC 750 X (2014–2015) NC 750 INTEGRA (2014–2015) NC 750 S (2014–2015) NC 700 S (2012–2013) NC 700 X (2012–2013) NC 700 INTEGRA (2012–2013)  

The 3P side mounting system was developed specifically for the SH23, SH35, SH36 and SH38 side cases, as well as the Terra TR30 and TR40 side bags. During the development phase, safety was the primary focus, alongside aesthetic considerations. Integrated design: The 3P mounting system adapts perfectly to the contours of the vehicle. The typical right-angled frame has been reduced to a single arm, which supports the three points (3P) required to secure the panniers. Position: Both the volume of the case and the angle of the 3P system have been designed to shift the weight of the luggage as close as possible to the centre of the motorbike. This ensures greater safety and stability when riding with a full load. Aerodynamics: The use of three mounting points provides both stability and flexibility. This is achieved through a slight oscillation of the pannier. This allows air to circulate freely around the pannier, thereby avoiding the so-called ‘angle effect’ typical of a flat, rigid pannier. Here too, this results in improved safety and stability whilst riding. Patent pending: The uniqueness and technical innovation of the 3P system have enabled SHAD to patent it. This makes SHAD the sole manufacturer able to offer this mounting system.Main material: Steel Note:Not compatible with TR36 and TR47

The 3P side mounting system was developed specifically for the SH23, SH35, SH36 and SH38 side cases, as well as the Terra TR30 and TR40 side bags. During the development phase, safety was the primary focus, alongside aesthetic considerations. Integrated design: The 3P mounting system adapts perfectly to the contours of the vehicle. The typical right-angled frame has been reduced to a single arm, which supports the three points (3P) required to secure the panniers. Position: Both the volume of the case and the angle of the 3P system have been designed to shift the weight of the luggage as close as possible to the centre of the motorbike. This ensures greater safety and stability when riding with a full load. Aerodynamics: The use of three mounting points provides both stability and flexibility. This is achieved through a slight oscillation of the pannier. This allows air to circulate freely around the pannier, thereby avoiding the so-called ‘angle effect’ typical of a flat, rigid pannier. Here too, this results in improved safety and stability whilst riding. Patent pending: The uniqueness and technical innovation of the 3P system have enabled SHAD to patent it. This makes SHAD the sole manufacturer able to offer this mounting system.Main material: Steel Note:Not compatible with TR36 and TR47

The 3P side mounting system was developed specifically for the SH23, SH35, SH36 and SH38 side cases, as well as the Terra TR30 and TR40 side bags. During the development phase, safety was the primary focus, alongside aesthetic considerations. Integrated design: The 3P mounting system adapts perfectly to the contours of the vehicle. The typical right-angled frame has been reduced to a single arm, which supports the three points (3P) required to secure the panniers. Position: Both the volume of the case and the angle of the 3P system have been designed to shift the weight of the luggage as close as possible to the centre of the motorbike. This ensures greater safety and stability when riding with a full load. Aerodynamics: The use of three mounting points provides both stability and flexibility. This is achieved through a slight oscillation of the pannier. This allows air to circulate freely around the pannier, thereby avoiding the so-called ‘angle effect’ typical of a flat, rigid pannier. Here too, this results in improved safety and stability whilst riding. Patent pending: The uniqueness and technical innovation of the 3P system have enabled SHAD to patent it. This makes SHAD the sole manufacturer able to offer this mounting system.Main material: Steel Notes:Not compatible with TR36 and TR47

The 3P side mounting system was developed specifically for the SH23, SH35 and SH36 side cases. During the development phase, the focus was on safety above all else, alongside aesthetic considerations. Integrated design: The 3P mounting system adapts perfectly to the contours of the vehicle. The typical right-angled frame has been reduced to a single arm, which supports the three points (3P) required to secure the panniers. Position: Both the volume of the pannier and the angle of the 3P system have been designed to shift the weight of the luggage as close as possible to the centre of the motorbike. This ensures greater safety and stability when riding with a full load. Aerodynamics: The use of three mounting points provides both stability and flexibility. This is achieved through a slight oscillation of the pannier. This allows air to circulate freely around the pannier, thereby avoiding the so-called ‘angle effect’ typical of flat, rigid panniers. Here too, this results in improved safety and stability whilst riding. Patent pending: The uniqueness and technical innovation of the 3P system have enabled SHAD to patent it. This makes SHAD the sole manufacturer able to offer this mounting system.Main material: Steel  Note: Not compatible with SH23, TR27, TR36 and TR47

The 3P side mounting system was developed specifically for the SH23, SH35, SH36 and SH38 side cases, as well as the Terra TR30 and TR40 side bags . During the development phase, safety was prioritised above all else, alongside aesthetic considerations. Integrated design: The 3P mounting system adapts perfectly to the contours of the vehicle. The typical right-angled frame has been reduced to a single arm, which supports the three points (3P) required to secure the panniers. Position: Both the volume of the case and the angle of the 3P system have been designed to shift the weight of the luggage as close as possible to the centre of the motorbike. This ensures greater safety and stability when riding with a full load. Aerodynamics: The use of three mounting points provides both stability and flexibility. This is achieved through a slight flex in the case. This allows air to circulate easily around the pannier, thereby avoiding the so-called ‘angle effect’ typical of a flat, rigid pannier. Here too, this results in improved safety and stability whilst riding. Patent pending: The uniqueness and technical innovation of the 3P system have enabled SHAD to patent it. This makes SHAD the sole manufacturer able to offer this mounting system.Main material: Steel Note: Not compatible with TR27, TR36 and TR47. 

The 3P side mounting system was developed specifically for the SH23, SH35, SH36 and SH38 side cases, as well as the Terra TR30 and TR40 side bags . During the development phase, safety was prioritised above all else, alongside aesthetic considerations. Integrated design: The 3P mounting system adapts perfectly to the contours of the vehicle. The typical right-angled frame has been reduced to a single arm that supports the three points (3P) required to secure the panniers. Position: Both the case’s volume and the angle of the 3P system have been designed to shift the weight of the luggage as close as possible to the centre of the motorbike. This ensures greater safety and stability when riding with a full load. Aerodynamics: The use of three mounting points provides both stability and flexibility. This is achieved through a slight oscillation of the pannier. This allows air to circulate freely around the pannier, thereby avoiding the so-called ‘angle effect’ typical of a flat, rigid pannier. Here too, this results in improved safety and stability whilst riding. Patent pending: The uniqueness and technical innovation of the 3P system have enabled SHAD to patent it. This makes SHAD the sole manufacturer able to offer this mounting system.Main material: Steel Note: Not compatible with TR27, TR36 and TR47. Suitable for the following models: F 900 GS ADVENTURE (2024–) F 850 GS (2018–2023) F 850 GS ADVENTURE (2019–2023) F 800 GS (2025–) F 750 GS (2018–2023)

The 3P side-mounting system was developed specifically for the SH23, SH35, SH36 and SH38 side cases, as well as the Terra TR30 and TR40 side bags. During the development phase, safety was prioritised above all else, alongside aesthetic considerations. Integrated design: The 3P mounting system adapts perfectly to the contours of the vehicle. The typical right-angled frame has been reduced to a single arm, which supports the three points (3P) required to secure the panniers. Position: Both the volume of the case and the angle of the 3P system have been designed to shift the weight of the luggage as close as possible to the centre of the motorbike. This ensures greater safety and stability when riding with a full load. Aerodynamics: The use of three mounting points provides both stability and flexibility. This is achieved through a slight flexing of the pannier. This allows air to circulate freely around the pannier, thereby avoiding the so-called ‘angle effect’ typical of a flat, rigid pannier. Here too, this results in improved safety and stability whilst riding. Patent pending: The uniqueness and technical innovation of the 3P system have enabled SHAD to patent it. This makes SHAD the sole manufacturer able to offer this mounting system.Main material: Steel Note: Not compatible with SH23, TR27, TR40, TR30, TR36 and TR47. The original BMW side bracket must be removed.

The 3P side mounting system was developed specifically for the SH23, SH35, SH36 and SH38 side cases, as well as the Terra TR30 and TR40 side bags. During the development phase, safety was the primary focus, alongside aesthetic considerations. Integrated design: The 3P mounting system adapts perfectly to the contours of the vehicle. The typical right-angled frame has been reduced to a single arm that supports the three points (3P) required to secure the panniers. Position: Both the volume of the case and the angle of the 3P system have been designed to shift the weight of the luggage as close as possible to the centre of the motorbike. This ensures greater safety and stability when riding with a full load. Aerodynamics: The use of three mounting points provides both stability and flexibility. This is achieved through a slight oscillation of the pannier. This allows air to circulate easily around the pannier, thereby avoiding the so-called ‘angle effect’ typical of a flat, rigid pannier. Here too, this results in improved safety and stability whilst riding. Patent pending: The uniqueness and technical innovation of the 3P system have enabled SHAD to patent it. This makes SHAD the sole manufacturer able to offer this mounting system.Main material: Steel Note: Not compatible with TR36 and TR47.

The 3P side mounting system was developed specifically for the SH23, SH35, SH36 and SH38 side cases, as well as the Terra TR30 and TR40 side bags. During the development phase, safety was prioritised above all else, alongside aesthetic considerations. Integrated design: The 3P mounting system adapts perfectly to the contours of the vehicle. The typical right-angled frame has been reduced to a single arm that supports the three points (3P) required to secure the panniers. Position: Both the volume of the case and the angle of the 3P system have been designed to shift the weight of the luggage as close as possible to the centre of the motorbike. This ensures greater safety and stability when riding with a full load. Aerodynamics: The use of three attachment points provides both stability and flexibility. This is achieved through a slight swaying motion of the pannier. This allows air to circulate freely around the pannier, thereby avoiding the so-called ‘angle effect’ typical of a flat, rigid pannier. Here too, this results in improved safety and stability whilst riding. Patent pending: The uniqueness and technical innovation of the 3P system have enabled SHAD to patent it. This makes SHAD the sole manufacturer able to offer this mounting system.Main material: Steel Note: Not compatible with TR40, TR30, TR36 and TR47.

The 3P side mounting system was developed specifically for the SH23, SH35, SH36 and SH38 side cases, as well as the Terra TR30 and TR40 side bags. During the development phase, safety was the primary focus, alongside aesthetic considerations. Integrated design: The 3P mounting system adapts perfectly to the contours of the vehicle. The typical right-angled frame has been reduced to a single arm, which supports the three points (3P) required to secure the panniers. Position: Both the volume of the case and the angle of the 3P system have been designed to shift the weight of the luggage as close as possible to the centre of the motorbike. This ensures greater safety and stability when riding with a full load. Aerodynamics: The use of three mounting points provides both stability and flexibility. This is achieved through a slight oscillation of the pannier. This allows air to circulate freely around the pannier, thereby avoiding the so-called ‘angle effect’ typical of a flat, rigid pannier. Here too, this results in improved safety and stability whilst riding. Patent pending: The uniqueness and technical innovation of the 3P system have enabled SHAD to patent it. This makes SHAD the sole manufacturer able to offer this mounting system. Main material: Steel Note:Not compatible with TR30, TR40, TR36 and TR47 

The 3P side mounting system was developed specifically for the SH23, SH35, SH36 and SH38 side cases, as well as the Terra TR30 and TR40 side bags. During the development phase, safety was the primary focus, alongside aesthetic considerations. Integrated design: The 3P mounting system adapts perfectly to the contours of the vehicle. The typical right-angled frame has been reduced to a single arm, which supports the three points (3P) required to secure the panniers. Position: Both the volume of the case and the angle of the 3P system have been designed to shift the weight of the luggage as close as possible to the centre of the motorbike. This ensures greater safety and stability when riding with a full load. Aerodynamics: The use of three mounting points provides both stability and flexibility. This is achieved through a slight oscillation of the pannier. This allows air to circulate freely around the pannier, thereby avoiding the so-called ‘angle effect’ typical of a flat, rigid pannier. Here too, this results in improved safety and stability whilst riding. Patent pending: The uniqueness and technical innovation of the 3P system have enabled SHAD to patent it. This makes SHAD the sole manufacturer able to offer this mounting system.Main material: Steel Notes: Not compatible with the S modelNot compatible with TR40, TR30, TR36 and TR47

The 3P side mounting system was developed specifically for the SH23, SH35, SH36 and SH38 side cases, as well as the Terra TR30 and TR40 side bags. During the development phase, safety was the primary focus, alongside aesthetic considerations. Integrated design: The 3P mounting system adapts perfectly to the contours of the vehicle. The typical right-angled frame has been reduced to a single arm, which supports the three points (3P) required for mounting the panniers. Position: Both the volume of the case and the angle of the 3P system have been designed to shift the weight of the luggage as close as possible to the centre of the motorbike. This ensures greater safety and stability when riding with a full load. Aerodynamics: The use of three mounting points provides both stability and flexibility. This is achieved through a slight oscillation of the pannier. This allows air to circulate freely around the pannier, thereby avoiding the so-called ‘angle effect’ typical of a flat, rigid pannier. Here too, this results in improved safety and stability whilst riding. Patent pending: The uniqueness and technical innovation of the 3P system have enabled SHAD to patent it. This makes SHAD the sole manufacturer able to offer this mounting system.Main material: steel Suitable for the following models:Multistrada 1260 / Enduro (2018–2024)Multistrada 1200 / Enduro (2016–2024)Multistrada 905 / 950 S (2016–2024)Multistrada V2 / V2S (2023–2024)Notes: Not compatible with TR36 and TR47The 3P system is not compatible with the original Ducati top case

The 3P side mounting system was developed specifically for the SH23, SH35, SH36 and SH38 side cases, as well as the Terra TR30 and TR40 side bags. During the development phase, safety was the primary focus, alongside aesthetic considerations.Integrated design: The 3P mounting system adapts perfectly to the contours of the vehicle. The typical right-angled frame has been reduced to a single arm, which supports the three points (3P) required for mounting the panniers.Position: Both the volume of the case and the angle of the 3P system have been designed to shift the weight of the luggage as close as possible to the centre of the motorbike. This ensures greater safety and stability when riding with a full load.Aerodynamics: The use of three mounting points provides both stability and flexibility. This is achieved through a slight oscillation of the pannier. This allows air to circulate freely around the pannier, thereby avoiding the so-called ‘angle effect’ typical of a flat, rigid pannier. Here too, this results in improved safety and stability whilst riding.Patent pending: The uniqueness and technical innovation of the 3P system have enabled SHAD to patent it. This makes SHAD the sole manufacturer able to offer this mounting system.Main material: Steel Note: Not compatible with TR36 and TR47

The 3P side mounting system was developed specifically for the SH23, SH35 and SH36 side cases. During the development phase, the focus was not only on aesthetic considerations but, above all, on safety. Integrated design: The 3P mounting system adapts perfectly to the contours of the vehicle. The typical right-angled frame has been reduced to a single arm, which supports the three points (3P) required to secure the panniers. Position: Both the volume of the pannier and the angle of the 3P system have been designed to shift the weight of the luggage as close as possible to the centre of the motorbike. This ensures greater safety and stability when riding with a full load. Aerodynamics: The use of three mounting points provides both stability and flexibility. This is achieved through a slight oscillation of the pannier. This allows air to circulate freely around the pannier, thereby avoiding the so-called ‘angle effect’ typical of a flat, rigid pannier. Here too, this results in improved safety and stability whilst riding. Patent pending: The uniqueness and technical innovation of the 3P system have enabled SHAD to patent it. This makes SHAD the sole manufacturer able to offer this mounting system.Main material: Steel Note:  Not compatible with TR40, TR30, TR27, SH38X, TR36 and TR47

The 3P side mounting system was developed specifically for the SH23, SH35, SH36 and SH38 side cases, as well as the Terra TR30 and TR40 side bags. During the development phase, safety was the primary focus, alongside aesthetic considerations.Integrated design: The 3P mounting system adapts perfectly to the contours of the vehicle. The typical right-angled frame has been reduced to a single arm, which supports the three points (3P) required for mounting the panniers.Position: Both the volume of the case and the angle of the 3P system have been designed to shift the weight of the luggage as close as possible to the centre of the motorbike. This ensures greater safety and stability when riding with a full load.Aerodynamics: The use of three mounting points provides both stability and flexibility. This is achieved through a slight oscillation of the pannier. This allows air to circulate freely around the pannier, thereby avoiding the so-called ‘angle effect’ typical of a flat, rigid pannier. Here too, this results in improved safety and stability whilst riding.Patent pending: The uniqueness and technical innovation of the 3P system have enabled SHAD to patent it. This makes SHAD the sole manufacturer able to offer this mounting system.Main material: Steel Note: Not compatible with SH23, TR27, TR30, TR40, TR36 and TR47

The 3P side mounting system was developed specifically for the SH23, SH35, SH36 and SH38 side cases, as well as the Terra TR30 and TR40 side bags. During the development phase, safety was the primary focus, alongside aesthetic considerations.Integrated design: The 3P mounting system adapts perfectly to the contours of the vehicle. The typical right-angled frame has been reduced to a single arm, which supports the three points (3P) required for mounting the panniers.Position: Both the volume of the case and the angle of the 3P system have been designed to shift the weight of the luggage as close as possible to the centre of the motorbike. This ensures greater safety and stability when riding with a full load.Aerodynamics: The use of three mounting points provides both stability and flexibility. This is achieved through a slight oscillation of the pannier. This allows air to circulate freely around the pannier, thereby avoiding the so-called ‘angle effect’ typical of a flat, rigid pannier. Here too, this results in improved safety and stability whilst riding.Patent pending: The uniqueness and technical innovation of the 3P system have enabled SHAD to patent it. This makes SHAD the sole manufacturer able to offer this mounting system.Main material: Steel Note: Not compatible with SH23, TR27, TR30, TR40, TR36 and TR47

The 3P side mounting system was developed specifically for the SH23, SH35 and SH36 side cases. During the development phase, the focus was on safety above all else, alongside aesthetic considerations. Integrated design: The 3P mounting system adapts perfectly to the contours of the vehicle. The typical right-angled frame has been reduced to a single arm that supports the three points (3P) required to secure the panniers. Position: Both the volume of the pannier and the angle of the 3P system have been designed to shift the weight of the luggage as close as possible to the centre of the motorbike. This ensures greater safety and stability when riding with a full load. Aerodynamics: The use of three mounting points provides both stability and flexibility. This is achieved through a slight oscillation of the pannier. This allows air to circulate freely around the pannier, thereby avoiding the so-called ‘angle effect’ typical of a flat, rigid pannier. Here too, this results in improved safety and stability whilst riding. Patent pending: The uniqueness and technical innovation of the 3P system have enabled SHAD to patent it. This makes SHAD the sole manufacturer able to offer this mounting system. Main material: Steel Note:  Not compatible with TR40, TR30, SH23, TR27, SH38X, TR36 and TR47

The 3P side mounting system was developed specifically for the SH23, SH35, SH36 and SH38 side cases, as well as the Terra TR30 and TR40 side bags. During the development phase, safety was the primary focus, alongside aesthetic considerations.Integrated design: The 3P mounting system adapts perfectly to the contours of the vehicle. The typical right-angled frame has been reduced to a single arm, which supports the three points (3P) required for mounting the panniers.Position: Both the volume of the case and the angle of the 3P system have been designed to shift the weight of the luggage as close as possible to the centre of the motorbike. This ensures greater safety and stability when riding with a full load.Aerodynamics: The use of three mounting points provides both stability and flexibility. This is achieved through a slight oscillation of the pannier. This allows air to circulate freely around the pannier, thereby avoiding the so-called ‘angle effect’ typical of a flat, rigid pannier. Here too, this results in improved safety and stability whilst riding.Patent pending: The uniqueness and technical innovation of the 3P system have enabled SHAD to patent it. This makes SHAD the sole manufacturer able to offer this mounting system.Main material: Steel Note: Not compatible with TR40, TR30, TR36 and TR47

The 3P side mounting system was developed specifically for the SH23, SH35, SH36 and SH38 side cases, as well as the Terra TR30 and TR40 side bags. During the development phase, safety was prioritised above all else, alongside aesthetic considerations.Integrated design: The 3P mounting system adapts perfectly to the contours of the vehicle. The typical right-angled frame has been reduced to a single arm, which supports the three points (3P) required to secure the panniers.Position: Both the volume of the case and the angle of the 3P system have been designed to shift the weight of the luggage as close as possible to the centre of the motorbike. This ensures greater safety and stability when riding with a full load.Aerodynamics: The use of three mounting points provides both stability and flexibility. This is achieved through a slight oscillation of the pannier. This allows air to circulate freely around the pannier, thereby avoiding the so-called ‘angle effect’ typical of a flat, rigid pannier. Here too, this results in improved safety and stability whilst riding.Patent pending: The uniqueness and technical innovation of the 3P system have enabled SHAD to patent it. This makes SHAD the sole manufacturer able to offer this mounting system.Main material: Steel Note: Not compatible with TR40, TR30, TR36 and TR47

The 3P side mounting system was developed specifically for the SH23, SH35, SH36 and SH38 side cases, as well as the Terra TR30 and TR40 side bags. During the development phase, safety was prioritised above all else, alongside aesthetic considerations.Integrated design: The 3P mounting system adapts perfectly to the contours of the vehicle. The typical right-angled frame has been reduced to a single arm, which supports the three points (3P) required to secure the panniers.Position: Both the volume of the case and the angle of the 3P system have been designed to shift the weight of the luggage as close as possible to the centre of the motorbike. This ensures greater safety and stability when riding with a full load.Aerodynamics: The use of three mounting points provides both stability and flexibility. This is achieved through a slight oscillation of the pannier. This allows air to circulate freely around the pannier, thereby avoiding the so-called ‘angle effect’ typical of a flat, rigid pannier. Here too, this results in improved safety and stability whilst riding.Patent pending: The uniqueness and technical innovation of the 3P system have enabled SHAD to patent it. This makes SHAD the sole manufacturer able to offer this mounting system.Main material: Steel Note: Not compatible with TR40, TR30, TR36 and TR47

The 3P side mounting system was developed specifically for the SH23, SH35, SH36 and SH38 side cases, as well as the Terra TR30 and TR40 side bags. During the development phase, safety was the primary focus, alongside aesthetic considerations. Integrated design: The 3P mounting system adapts perfectly to the contours of the vehicle. The typical right-angled frame has been reduced to a single arm, which supports the three points (3P) required for mounting the panniers.Position: Both the volume of the case and the angle of the 3P system have been designed to shift the weight of the luggage as close as possible to the centre of the motorbike. This ensures greater safety and stability when riding with a full load.Aerodynamics: The use of three mounting points provides both stability and flexibility. This is achieved through a slight oscillation of the pannier. This allows air to circulate freely around the pannier, thereby avoiding the so-called ‘angle effect’ typical of a flat, rigid pannier. Here too, this results in improved safety and stability whilst riding.Patent pending: The uniqueness and technical innovation of the 3P system have enabled SHAD to patent it. This makes SHAD the sole manufacturer able to offer this mounting system.Main material: SteelNotes: Not compatible with SH23 and TR27When fitted with the SHAD Top Case Carrier 130.203064, it is not compatible with TR40 and TR30