HIGHSIDER pro 7 inch headlight Frame-R1 Type 4 LED Black Side mounting

HIGHSIDER pro LED main headlight FRAME-R1 TYPE 4, E-approved
- Mounting WITHOUT housing, a light goes on. -

Every centimeter counts to place the headlight as close as possible between the two stanchions in the fork. REDUCED TO THE MAX was the premise behind the development of the innovative FRAME headlight mount. The purist aluminum ring makes it possible for the first time to mount various LED headlight inserts free-standing on the motorcycle. By deliberately dispensing with a headlight housing, an unbeatably narrow installation position is made possible and better cooling of the LED unit is also achieved.

On many motorcycles, the H4 or H7 lamp lights up, more or less twinkling away. Seeing better usually also means being seen better, which is not unimportant as summer turns to fall and in times when cars are increasingly equipped with bright daytime running lights. Whether as a replacement for better visibility at night, better visibility during the day or to give the motorcycle a more attractive appearance, if you are looking for a stylish and innovative power headlight, the FRAME-R1 LED main headlight is an excellent choice.

Two different mounting systems are available for variable attachment of the headlight.
- Side Mount, the conventional screw connection on the side of the lamp holder
- Bottom Mount, attachment at the bottom for screwing onto the fork bridge

The side-mount holders can be mounted in three positions, thus compensating for 32mm in installation depth and 46mm in width.

Features:
- Round 7 inch headlight with CNC mounting ring and mounting kit
- Mounting WITHOUT a headlight housing
- Improves cooling
- Many installation options
- Flat installation
- Modern look, stylish and innovative
- Clear glass
- Chrome-plated reflector
- High beam, low beam, parking light and daytime running light function
- Daytime running light and position light installed in a central bar
- Low beam shines above the bar, the high beam accordingly below
- Asymmetrical luminous flux
- E-approvede-approved, nothing needs to be registered

Give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER pro headlight series will definitely turn your bike into a highlight!

Dimensions:
A diameter = 200 mm
GA diameter = 168 mm
I diameter = 160 mm
T = 61 mm
R = 10 mm

Connections:
Black cable = earth (-)
Blue cable = low beam (+), power consumption at 12V: 1.8A, 22W
Yellow cable = high beam (+), power consumption at12V: 1.3A, 13W
Black cable = earth (-)

TFL:
Black cable = ground (-)
Red cable = daytime running light (+), power consumption at 12V: 1.2A, 14W
White cable = position light (+), power consumption at 12V: 0.2A, 2.4W

Scope of delivery: 1 piece

Notes:
Use asymmetrical, only approved for right-hand traffic.
The daytime running light can also be used on vehicles without a light switch. The following components are required for this: Switch: Art. No. 240-044
HIGHSIDER pro DRL CONTROL- BOX CB1: Art. No. 208-108 (switches between low beam and daytime running light)