HIGHSIDER pro Flat Track L14 handlebar steel black, 22mm

HIGHSIDER pro steel handlebars 7/8 inch (22.2mm)

HIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own selection of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades.

In its own test series in the 1990s, HIGHSIDER pro researched the load on handlebars during riding and designed its own handlebars to withstand the actual load. The result is a product made of high-strength steel that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly checks its handlebars with its own test program, which ensures the consistent quality of the handlebars.

The HIGHSIDER pro steel handlebars have an outer diameter of 22.2mm (7/8 inch) and a wall thickness of 2mm (18mm inside). The surface is high-gloss polished and chrome-plated or black KTL-coated.

The handlebars are supplied without holes for the anti-rotation protection of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.

All HIGHSIDER pro handlebars are supplied with ABE.
The range of models is huge and is expanded every year with new entries.
The ABE reliably documents which handlebar type fits and is approved on the motorcycle.
As a rule, the assignments in the ABE are without conditions.
However, there are also exceptions.
For example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.
Therefore, see the entry for your motorcycle in the ABE.
If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.

Scope of delivery: 1 piece

Care instructions:
- Only use acid- and alkali-free cleaner for all handlebars and their surface variants!
- Never use in direct sunlight and do not allow the cleaner to dry out.
- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any dripping immediately with a soft cloth.
- Test the compatibility of cleaning agents on an inconspicuous area before use!
- No guarantee or warranty in the event of improper cleaning and care.