Trunk carrier Lock it for Honda CB 500 X (17-18) Hepco & Becker

The Hepco & Becker Lock-it side case carrier in anthracite was specially developed for the Honda CB 500 X (model years 2017-2018). This carrier is made of German tubular steel and custom-made laser parts, which have been additionally reinforced in areas subject to high stress. The Lock-it side case carrier is characterized by its quick assembly and disassembly. All you have to do is loosen the attached Lock-it screws by a quarter turn and the side parts can be removed to the rear or to the side. To prevent theft, the carrier can optionally be secured with the lockable Lock-it screws. The cases are locked to the carrier using a retaining lock attached to the case. This requires the lock adapters that are normally included with the cases. These lock adapters are screwed to the right and left of the carrier and provide the fastening option for the case retaining locks. The construction is MADE IN GERMANY and provides a stable base for your side cases. The side case carrier has a high-quality coating and an attractive surface finish. Installation is generally straightforward, although you should follow the installation instructions supplied. Please check the vehicle-specific information or the installation instructions for any restrictions. This carrier is suitable for most Hepco & Becker hard-shell side cases. Luggage systems generally do not require a general operating permit (ABE) or registration. The tube diameter is 16 mm.